https://jubilee3d.com/index.php?action=history&feed=atom&title=E3D_Titan_Aqua_Mount
E3D Titan Aqua Mount - Revision history
2026-04-22T14:38:00Z
Revision history for this page on the wiki
MediaWiki 1.35.0
https://jubilee3d.com/index.php?title=E3D_Titan_Aqua_Mount&diff=579&oldid=prev
EMRosa: /* 12V mixed with 24V */
2020-07-09T17:38:32Z
<p><span dir="auto"><span class="autocomment">12V mixed with 24V</span></span></p>
<table class="diff diff-contentalign-left diff-editfont-monospace" data-mw="interface">
<col class="diff-marker" />
<col class="diff-content" />
<col class="diff-marker" />
<col class="diff-content" />
<tr class="diff-title" lang="en">
<td colspan="2" style="background-color: #fff; color: #202122; text-align: center;">← Older revision</td>
<td colspan="2" style="background-color: #fff; color: #202122; text-align: center;">Revision as of 17:38, 9 July 2020</td>
</tr><tr><td colspan="2" class="diff-lineno" id="mw-diff-left-l17" >Line 17:</td>
<td colspan="2" class="diff-lineno">Line 17:</td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>== 12V mixed with 24V ==</div></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>== 12V mixed with 24V ==</div></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>[[File:24V to 12V buck converter.png|thumb|250px|right|12V stepdown converter.]]</div></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>[[File:24V to 12V buck converter.png|thumb|250px|right|12V stepdown converter.]]</div></td></tr>
<tr><td class='diff-marker'>−</td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;"><div>The Water-Cooling kit from E3D uses a 12V fan and 12V pump and therefore cannot be plugged directly into a Duet2Eth board used to drive 24V fans. As a solution, the Duet Wiki provides <del class="diffchange diffchange-inline">a solution </del>for using mixed voltages. It involves taking 24V from the power supply and using a step-down converter (e.g. LM2596 Buck Converter DC to DC Step-Down Voltage Regulator) to provide 12V+ to your fans. The ground pins for the pump and radiator fan are then connected to the Duet board for control. [https://duet3d.dozuki.com/Wiki/Connecting_and_configuring_fans#Section_Using_fans_with_mixed_voltages Duet3D link for connecting fans with mixed voltages ]</div></td><td class='diff-marker'>+</td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div>The Water-Cooling kit from E3D uses a 12V fan and 12V pump and therefore cannot be plugged directly into a Duet2Eth board used to drive 24V fans. As a solution, the Duet Wiki provides <ins class="diffchange diffchange-inline">instructions </ins>for using mixed voltages. It involves taking 24V from the power supply and using a step-down converter (e.g. LM2596 Buck Converter DC to DC Step-Down Voltage Regulator) to provide 12V+ to your fans. The ground pins for the pump and radiator fan are then connected to the Duet board for control. [https://duet3d.dozuki.com/Wiki/Connecting_and_configuring_fans#Section_Using_fans_with_mixed_voltages Duet3D link for connecting fans with mixed voltages ]</div></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>This provides the 12V needed for the reservoir pump and radiator fan, while allowing the Duet2Eth & Duex5 boards to maintain 24V for all other fans.</div></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>This provides the 12V needed for the reservoir pump and radiator fan, while allowing the Duet2Eth & Duex5 boards to maintain 24V for all other fans.</div></td></tr>
<!-- diff cache key jubilee3d_com:diff::1.12:old-578:rev-579 -->
</table>
EMRosa
https://jubilee3d.com/index.php?title=E3D_Titan_Aqua_Mount&diff=578&oldid=prev
EMRosa at 17:36, 9 July 2020
2020-07-09T17:36:46Z
<p></p>
<table class="diff diff-contentalign-left diff-editfont-monospace" data-mw="interface">
<col class="diff-marker" />
<col class="diff-content" />
<col class="diff-marker" />
<col class="diff-content" />
<tr class="diff-title" lang="en">
<td colspan="2" style="background-color: #fff; color: #202122; text-align: center;">← Older revision</td>
<td colspan="2" style="background-color: #fff; color: #202122; text-align: center;">Revision as of 17:36, 9 July 2020</td>
</tr><tr><td colspan="2" class="diff-lineno" id="mw-diff-left-l1" >Line 1:</td>
<td colspan="2" class="diff-lineno">Line 1:</td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>[[File:Titan Aqua overall view.jpg|thumb|400px|E3D Titan Aqua with coupling plate and wings attached.]]</div></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>[[File:Titan Aqua overall view.jpg|thumb|400px|E3D Titan Aqua with coupling plate and wings attached.]]</div></td></tr>
<tr><td class='diff-marker'>−</td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;"><div>E3D's Titan Aqua is a water-cooled HotEnd that <del class="diffchange diffchange-inline">also </del>cools the Extruder<del class="diffchange diffchange-inline">. It's an all-metal HotEnd that can print at higher temperatures with additional equipment</del>. The E3D Titan Aqua requires a water-cooling reservoir and radiator with fan. E3D sells a kit containing a reservoir, radiator with fan, and all required fittings and tubing. The pump and radiator fan in E3D's kit are 12V only: for 24V printers please use a DC-DC converter.</div></td><td class='diff-marker'>+</td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div>E3D's Titan Aqua is a water-cooled HotEnd that <ins class="diffchange diffchange-inline">simultaneously </ins>cools the Extruder. The E3D Titan Aqua requires a water-cooling reservoir and radiator with fan. E3D sells a <ins class="diffchange diffchange-inline">separate </ins>kit containing a reservoir, radiator with fan, and all required fittings and tubing. The pump and radiator fan in E3D's kit are 12V only: for 24V printers please use a DC-DC converter.</div></td></tr>
<tr><td colspan="2"> </td><td class='diff-marker'>+</td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div> </div></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>== Adapting the Default Tool Plate to mount an E3D Titan Aqua==</div></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>== Adapting the Default Tool Plate to mount an E3D Titan Aqua==</div></td></tr>
<tr><td class='diff-marker'>−</td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;"><div>The E3D Titan Aqua includes E3D's own "compact but powerful" NEMA17 extruder stepper motor but in order to minimize the <del class="diffchange diffchange-inline">tools </del>impact on usable <del class="diffchange diffchange-inline">Y area</del>, an LDO compact stepper was chosen; The LDO variant is 14mm more shallow.[[Media:E3D vs LDO compact stepper.png| Photo of comparison.]]</div></td><td class='diff-marker'>+</td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div>The E3D Titan Aqua includes E3D's own "compact but powerful" NEMA17 extruder stepper motor but in order to minimize the <ins class="diffchange diffchange-inline">tool's </ins>impact on usable <ins class="diffchange diffchange-inline">y-axis</ins>, an LDO compact stepper was chosen; The LDO variant is 14mm more shallow.[[Media:E3D vs LDO compact stepper.png| Photo of comparison.]]</div></td></tr>
<tr><td colspan="2"> </td><td class='diff-marker'>+</td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div> </div></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>=== Coupler Plate design ===</div></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>=== Coupler Plate design ===</div></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>The tool coupling plate was designed using a combination of a CAD model of the E3D Titan Aqua and the default E3D V6/Bondtech tool plate. </div></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>The tool coupling plate was designed using a combination of a CAD model of the E3D Titan Aqua and the default E3D V6/Bondtech tool plate. </div></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>[[Media:Titan Aqua coupling plate view.png| Closeup of tool plate.]]</div></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>[[Media:Titan Aqua coupling plate view.png| Closeup of tool plate.]]</div></td></tr>
<tr><td colspan="2"> </td><td class='diff-marker'>+</td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div><ins style="font-weight: bold; text-decoration: none;"></ins></div></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>=== Left/Right Wing Design ===</div></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>=== Left/Right Wing Design ===</div></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>The left and right wing were designed simply to ensure the z-position of the tool plate while utilizing the same 47mm tool post design. [[Media:Titan Aqua side view.png| Closeup of side view.]]</div></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>The left and right wing were designed simply to ensure the z-position of the tool plate while utilizing the same 47mm tool post design. [[Media:Titan Aqua side view.png| Closeup of side view.]]</div></td></tr>
<!-- diff cache key jubilee3d_com:diff::1.12:old-577:rev-578 -->
</table>
EMRosa
https://jubilee3d.com/index.php?title=E3D_Titan_Aqua_Mount&diff=577&oldid=prev
EMRosa: /* Effect on Other Tools */
2020-07-09T17:34:09Z
<p><span dir="auto"><span class="autocomment">Effect on Other Tools</span></span></p>
<table class="diff diff-contentalign-left diff-editfont-monospace" data-mw="interface">
<col class="diff-marker" />
<col class="diff-content" />
<col class="diff-marker" />
<col class="diff-content" />
<tr class="diff-title" lang="en">
<td colspan="2" style="background-color: #fff; color: #202122; text-align: center;">← Older revision</td>
<td colspan="2" style="background-color: #fff; color: #202122; text-align: center;">Revision as of 17:34, 9 July 2020</td>
</tr><tr><td colspan="2" class="diff-lineno" id="mw-diff-left-l22" >Line 22:</td>
<td colspan="2" class="diff-lineno">Line 22:</td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>As a result of the increased size in Y over the default tool, the other tools' coupling plates needed offsetting. This design problem can be solved many ways; we chose to us a 15mm "spacer" with two 15mm M3 standoff press-fit into it. [[Media:15mm spacer installed on default tool post.png| Closeup of spacer implementation.]]</div></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>As a result of the increased size in Y over the default tool, the other tools' coupling plates needed offsetting. This design problem can be solved many ways; we chose to us a 15mm "spacer" with two 15mm M3 standoff press-fit into it. [[Media:15mm spacer installed on default tool post.png| Closeup of spacer implementation.]]</div></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td></tr>
<tr><td class='diff-marker'>−</td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;"><div>Unfortunately, tool sag is a problem with this configuration. As a result, this spacer is seen as a temporary solution <del class="diffchange diffchange-inline">while designing </del>an elongated tool post to correctly move the tool out along Y <del class="diffchange diffchange-inline">and </del>maintaining a square face to the carriage coupling plate would be preferential.</div></td><td class='diff-marker'>+</td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div>Unfortunately, tool sag is a problem with this configuration. As a result, this spacer is seen as a temporary solution<ins class="diffchange diffchange-inline">. Designing </ins>an elongated tool post to correctly move the tool out along Y <ins class="diffchange diffchange-inline">while </ins>maintaining a square face to the carriage coupling plate would be preferential.</div></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>== Other links to items on this page ==</div></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>== Other links to items on this page ==</div></td></tr>
<!-- diff cache key jubilee3d_com:diff::1.12:old-576:rev-577 -->
</table>
EMRosa
https://jubilee3d.com/index.php?title=E3D_Titan_Aqua_Mount&diff=576&oldid=prev
EMRosa at 17:32, 9 July 2020
2020-07-09T17:32:59Z
<p></p>
<table class="diff diff-contentalign-left diff-editfont-monospace" data-mw="interface">
<col class="diff-marker" />
<col class="diff-content" />
<col class="diff-marker" />
<col class="diff-content" />
<tr class="diff-title" lang="en">
<td colspan="2" style="background-color: #fff; color: #202122; text-align: center;">← Older revision</td>
<td colspan="2" style="background-color: #fff; color: #202122; text-align: center;">Revision as of 17:32, 9 July 2020</td>
</tr><tr><td colspan="2" class="diff-lineno" id="mw-diff-left-l25" >Line 25:</td>
<td colspan="2" class="diff-lineno">Line 25:</td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>== Other links to items on this page ==</div></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>== Other links to items on this page ==</div></td></tr>
<tr><td colspan="2"> </td><td class='diff-marker'>+</td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div><ins style="font-weight: bold; text-decoration: none;"></ins></div></td></tr>
<tr><td colspan="2"> </td><td class='diff-marker'>+</td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div><ins style="font-weight: bold; text-decoration: none;">[https://github.com/EMRosa/Jubilee-Titan-Aqua-Tool-Mount Jubilee Titan Aqua Tool Mount] by EMRosa</ins></div></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>[https://e3d-online.dozuki.com/Guide/Titan+Aqua+Assembly/62?lang=en E3D's Assembly guide] for Titan Aqua</div></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>[https://e3d-online.dozuki.com/Guide/Titan+Aqua+Assembly/62?lang=en E3D's Assembly guide] for Titan Aqua</div></td></tr>
<!-- diff cache key jubilee3d_com:diff::1.12:old-575:rev-576 -->
</table>
EMRosa
https://jubilee3d.com/index.php?title=E3D_Titan_Aqua_Mount&diff=575&oldid=prev
EMRosa: /* Left/Right Wing Design */
2020-07-09T17:32:01Z
<p><span dir="auto"><span class="autocomment">Left/Right Wing Design</span></span></p>
<table class="diff diff-contentalign-left diff-editfont-monospace" data-mw="interface">
<col class="diff-marker" />
<col class="diff-content" />
<col class="diff-marker" />
<col class="diff-content" />
<tr class="diff-title" lang="en">
<td colspan="2" style="background-color: #fff; color: #202122; text-align: center;">← Older revision</td>
<td colspan="2" style="background-color: #fff; color: #202122; text-align: center;">Revision as of 17:32, 9 July 2020</td>
</tr><tr><td colspan="2" class="diff-lineno" id="mw-diff-left-l7" >Line 7:</td>
<td colspan="2" class="diff-lineno">Line 7:</td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>[[Media:Titan Aqua coupling plate view.png| Closeup of tool plate.]]</div></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>[[Media:Titan Aqua coupling plate view.png| Closeup of tool plate.]]</div></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>=== Left/Right Wing Design ===</div></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>=== Left/Right Wing Design ===</div></td></tr>
<tr><td class='diff-marker'>−</td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;"><div>The left and right wing were simply <del class="diffchange diffchange-inline">designed </del>to ensure the z-position of the tool plate while utilizing the same 47mm tool post design. [[Media:Titan Aqua side view.png| Closeup of side view.]]</div></td><td class='diff-marker'>+</td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div>The left and right wing were <ins class="diffchange diffchange-inline">designed </ins>simply to ensure the z-position of the tool plate while utilizing the same 47mm tool post design. [[Media:Titan Aqua side view.png| Closeup of side view.]]</div></td></tr>
<tr><td colspan="2"> </td><td class='diff-marker'>+</td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div> </div></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>== Water Cooling Reservoir, Pump, Hoses, and Fittings ==</div></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>== Water Cooling Reservoir, Pump, Hoses, and Fittings ==</div></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>[[File:Radiator and Water Pump.png|thumb|250px|left|Radiator/Fan and Pump/Reservoir mounted on side panel.]] The water cooling kit from E3D comes with a radiator with 12V fan, 12V pump with reservoir, nylon tubing, silicon tubing, and various fittings. The kit provides enough of the "stiffer" nylon tubing to be bundled with the stepper motor, heater, thermistor, and fan wires. As a result, there were many options for mounting the pump radiator and fan. </div></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>[[File:Radiator and Water Pump.png|thumb|250px|left|Radiator/Fan and Pump/Reservoir mounted on side panel.]] The water cooling kit from E3D comes with a radiator with 12V fan, 12V pump with reservoir, nylon tubing, silicon tubing, and various fittings. The kit provides enough of the "stiffer" nylon tubing to be bundled with the stepper motor, heater, thermistor, and fan wires. As a result, there were many options for mounting the pump radiator and fan. </div></td></tr>
<!-- diff cache key jubilee3d_com:diff::1.12:old-574:rev-575 -->
</table>
EMRosa
https://jubilee3d.com/index.php?title=E3D_Titan_Aqua_Mount&diff=574&oldid=prev
EMRosa at 17:31, 9 July 2020
2020-07-09T17:31:05Z
<p></p>
<table class="diff diff-contentalign-left diff-editfont-monospace" data-mw="interface">
<col class="diff-marker" />
<col class="diff-content" />
<col class="diff-marker" />
<col class="diff-content" />
<tr class="diff-title" lang="en">
<td colspan="2" style="background-color: #fff; color: #202122; text-align: center;">← Older revision</td>
<td colspan="2" style="background-color: #fff; color: #202122; text-align: center;">Revision as of 17:31, 9 July 2020</td>
</tr><tr><td colspan="2" class="diff-lineno" id="mw-diff-left-l1" >Line 1:</td>
<td colspan="2" class="diff-lineno">Line 1:</td></tr>
<tr><td class='diff-marker'>−</td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;"><div>[[File:Titan Aqua overall view.jpg|thumb|<del class="diffchange diffchange-inline">300px</del>|E3D Titan Aqua with coupling plate and wings attached.]]</div></td><td class='diff-marker'>+</td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div>[[File:Titan Aqua overall view.jpg|thumb|<ins class="diffchange diffchange-inline">400px</ins>|E3D Titan Aqua with coupling plate and wings attached.]]</div></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>E3D's Titan Aqua is a water-cooled HotEnd that also cools the Extruder. It's an all-metal HotEnd that can print at higher temperatures with additional equipment. The E3D Titan Aqua requires a water-cooling reservoir and radiator with fan. E3D sells a kit containing a reservoir, radiator with fan, and all required fittings and tubing. The pump and radiator fan in E3D's kit are 12V only: for 24V printers please use a DC-DC converter.</div></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>E3D's Titan Aqua is a water-cooled HotEnd that also cools the Extruder. It's an all-metal HotEnd that can print at higher temperatures with additional equipment. The E3D Titan Aqua requires a water-cooling reservoir and radiator with fan. E3D sells a kit containing a reservoir, radiator with fan, and all required fittings and tubing. The pump and radiator fan in E3D's kit are 12V only: for 24V printers please use a DC-DC converter.</div></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>== Adapting the Default Tool Plate to mount an E3D Titan Aqua==</div></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>== Adapting the Default Tool Plate to mount an E3D Titan Aqua==</div></td></tr>
<tr><td colspan="2" class="diff-lineno" id="mw-diff-left-l9" >Line 9:</td>
<td colspan="2" class="diff-lineno">Line 9:</td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>The left and right wing were simply designed to ensure the z-position of the tool plate while utilizing the same 47mm tool post design. [[Media:Titan Aqua side view.png| Closeup of side view.]]</div></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>The left and right wing were simply designed to ensure the z-position of the tool plate while utilizing the same 47mm tool post design. [[Media:Titan Aqua side view.png| Closeup of side view.]]</div></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>== Water Cooling Reservoir, Pump, Hoses, and Fittings ==</div></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>== Water Cooling Reservoir, Pump, Hoses, and Fittings ==</div></td></tr>
<tr><td class='diff-marker'>−</td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;"><div>[[File:Radiator and Water Pump.png|thumb|<del class="diffchange diffchange-inline">150px</del>|left|Radiator/Fan and Pump/Reservoir mounted on side panel.]] The water cooling kit from E3D comes with a radiator with 12V fan, 12V pump with reservoir, nylon tubing, silicon tubing, and various fittings. The kit provides enough of the "stiffer" nylon tubing to be bundled with the stepper motor, heater, thermistor, and fan wires. As a result, there were many options for mounting the pump radiator and fan. </div></td><td class='diff-marker'>+</td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div>[[File:Radiator and Water Pump.png|thumb|<ins class="diffchange diffchange-inline">250px</ins>|left|Radiator/Fan and Pump/Reservoir mounted on side panel.]] The water cooling kit from E3D comes with a radiator with 12V fan, 12V pump with reservoir, nylon tubing, silicon tubing, and various fittings. The kit provides enough of the "stiffer" nylon tubing to be bundled with the stepper motor, heater, thermistor, and fan wires. As a result, there were many options for mounting the pump radiator and fan. </div></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>== 12V mixed with 24V ==</div></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>== 12V mixed with 24V ==</div></td></tr>
<tr><td class='diff-marker'>−</td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;"><div>[[File:24V to 12V buck converter.png|thumb|<del class="diffchange diffchange-inline">150px</del>|right|12V stepdown converter.]]</div></td><td class='diff-marker'>+</td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div>[[File:24V to 12V buck converter.png|thumb|<ins class="diffchange diffchange-inline">250px</ins>|right|12V stepdown converter.]]</div></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>The Water-Cooling kit from E3D uses a 12V fan and 12V pump and therefore cannot be plugged directly into a Duet2Eth board used to drive 24V fans. As a solution, the Duet Wiki provides a solution for using mixed voltages. It involves taking 24V from the power supply and using a step-down converter (e.g. LM2596 Buck Converter DC to DC Step-Down Voltage Regulator) to provide 12V+ to your fans. The ground pins for the pump and radiator fan are then connected to the Duet board for control. [https://duet3d.dozuki.com/Wiki/Connecting_and_configuring_fans#Section_Using_fans_with_mixed_voltages Duet3D link for connecting fans with mixed voltages ]</div></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>The Water-Cooling kit from E3D uses a 12V fan and 12V pump and therefore cannot be plugged directly into a Duet2Eth board used to drive 24V fans. As a solution, the Duet Wiki provides a solution for using mixed voltages. It involves taking 24V from the power supply and using a step-down converter (e.g. LM2596 Buck Converter DC to DC Step-Down Voltage Regulator) to provide 12V+ to your fans. The ground pins for the pump and radiator fan are then connected to the Duet board for control. [https://duet3d.dozuki.com/Wiki/Connecting_and_configuring_fans#Section_Using_fans_with_mixed_voltages Duet3D link for connecting fans with mixed voltages ]</div></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td></tr>
<!-- diff cache key jubilee3d_com:diff::1.12:old-573:rev-574 -->
</table>
EMRosa
https://jubilee3d.com/index.php?title=E3D_Titan_Aqua_Mount&diff=573&oldid=prev
EMRosa: /* 12V mixed with 24V */
2020-07-09T17:30:09Z
<p><span dir="auto"><span class="autocomment">12V mixed with 24V</span></span></p>
<table class="diff diff-contentalign-left diff-editfont-monospace" data-mw="interface">
<col class="diff-marker" />
<col class="diff-content" />
<col class="diff-marker" />
<col class="diff-content" />
<tr class="diff-title" lang="en">
<td colspan="2" style="background-color: #fff; color: #202122; text-align: center;">← Older revision</td>
<td colspan="2" style="background-color: #fff; color: #202122; text-align: center;">Revision as of 17:30, 9 July 2020</td>
</tr><tr><td colspan="2" class="diff-lineno" id="mw-diff-left-l13" >Line 13:</td>
<td colspan="2" class="diff-lineno">Line 13:</td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>== 12V mixed with 24V ==</div></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>== 12V mixed with 24V ==</div></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>[[File:24V to 12V buck converter.png|thumb|150px|right|12V stepdown converter.]]</div></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>[[File:24V to 12V buck converter.png|thumb|150px|right|12V stepdown converter.]]</div></td></tr>
<tr><td class='diff-marker'>−</td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;"><div>The Water-Cooling kit from E3D uses a 12V fan and 12V pump and therefore cannot be plugged directly into a Duet2Eth board used to drive 24V fans. As a solution, the Duet Wiki provides a solution for using mixed voltages. It involves taking 24V from the power supply and using a step-down converter (e.g. LM2596 Buck Converter DC to DC Step-Down Voltage Regulator) to provide 12V+ to your fans. <del class="diffchange diffchange-inline">Then connect the </del>ground pins <del class="diffchange diffchange-inline">of </del>the <del class="diffchange diffchange-inline">fans </del>to the Duet board for control. [https://duet3d.dozuki.com/Wiki/Connecting_and_configuring_fans#Section_Using_fans_with_mixed_voltages Duet3D link for connecting fans with mixed voltages ]</div></td><td class='diff-marker'>+</td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div>The Water-Cooling kit from E3D uses a 12V fan and 12V pump and therefore cannot be plugged directly into a Duet2Eth board used to drive 24V fans. As a solution, the Duet Wiki provides a solution for using mixed voltages. It involves taking 24V from the power supply and using a step-down converter (e.g. LM2596 Buck Converter DC to DC Step-Down Voltage Regulator) to provide 12V+ to your fans. <ins class="diffchange diffchange-inline">The </ins>ground pins <ins class="diffchange diffchange-inline">for </ins>the <ins class="diffchange diffchange-inline">pump and radiator fan are then connected </ins>to the Duet board for control. [https://duet3d.dozuki.com/Wiki/Connecting_and_configuring_fans#Section_Using_fans_with_mixed_voltages Duet3D link for connecting fans with mixed voltages ]</div></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td></tr>
<tr><td class='diff-marker'>−</td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;"><div>This provides the 12V needed for the reservoir pump and radiator fan, while allowing the Duet2Eth & Duex5 boards to maintain 24V for <del class="diffchange diffchange-inline">any additional </del>fans.</div></td><td class='diff-marker'>+</td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div>This provides the 12V needed for the reservoir pump and radiator fan, while allowing the Duet2Eth & Duex5 boards to maintain 24V for <ins class="diffchange diffchange-inline">all other </ins>fans.</div></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>== Effect on Other Tools ==</div></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>== Effect on Other Tools ==</div></td></tr>
</table>
EMRosa
https://jubilee3d.com/index.php?title=E3D_Titan_Aqua_Mount&diff=572&oldid=prev
EMRosa at 17:24, 9 July 2020
2020-07-09T17:24:26Z
<p></p>
<table class="diff diff-contentalign-left diff-editfont-monospace" data-mw="interface">
<col class="diff-marker" />
<col class="diff-content" />
<col class="diff-marker" />
<col class="diff-content" />
<tr class="diff-title" lang="en">
<td colspan="2" style="background-color: #fff; color: #202122; text-align: center;">← Older revision</td>
<td colspan="2" style="background-color: #fff; color: #202122; text-align: center;">Revision as of 17:24, 9 July 2020</td>
</tr><tr><td colspan="2" class="diff-lineno" id="mw-diff-left-l1" >Line 1:</td>
<td colspan="2" class="diff-lineno">Line 1:</td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>[[File:Titan Aqua overall view.jpg|thumb|300px|E3D Titan Aqua with coupling plate and wings attached.]]</div></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>[[File:Titan Aqua overall view.jpg|thumb|300px|E3D Titan Aqua with coupling plate and wings attached.]]</div></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>E3D's Titan Aqua is a water-cooled HotEnd that also cools the Extruder. It's an all-metal HotEnd that can print at higher temperatures with additional equipment. The E3D Titan Aqua requires a water-cooling reservoir and radiator with fan. E3D sells a kit containing a reservoir, radiator with fan, and all required fittings and tubing. The pump and radiator fan in E3D's kit are 12V only: for 24V printers please use a DC-DC converter.</div></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>E3D's Titan Aqua is a water-cooled HotEnd that also cools the Extruder. It's an all-metal HotEnd that can print at higher temperatures with additional equipment. The E3D Titan Aqua requires a water-cooling reservoir and radiator with fan. E3D sells a kit containing a reservoir, radiator with fan, and all required fittings and tubing. The pump and radiator fan in E3D's kit are 12V only: for 24V printers please use a DC-DC converter.</div></td></tr>
<tr><td class='diff-marker'>−</td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;"><div><del style="font-weight: bold; text-decoration: none;"></del></div></td><td colspan="2"> </td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>== Adapting the Default Tool Plate to mount an E3D Titan Aqua==</div></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>== Adapting the Default Tool Plate to mount an E3D Titan Aqua==</div></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>The E3D Titan Aqua includes E3D's own "compact but powerful" NEMA17 extruder stepper motor but in order to minimize the tools impact on usable Y area, an LDO compact stepper was chosen; The LDO variant is 14mm more shallow.[[Media:E3D vs LDO compact stepper.png| Photo of comparison.]]</div></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>The E3D Titan Aqua includes E3D's own "compact but powerful" NEMA17 extruder stepper motor but in order to minimize the tools impact on usable Y area, an LDO compact stepper was chosen; The LDO variant is 14mm more shallow.[[Media:E3D vs LDO compact stepper.png| Photo of comparison.]]</div></td></tr>
<tr><td colspan="2" class="diff-lineno" id="mw-diff-left-l7" >Line 7:</td>
<td colspan="2" class="diff-lineno">Line 6:</td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>The tool coupling plate was designed using a combination of a CAD model of the E3D Titan Aqua and the default E3D V6/Bondtech tool plate. </div></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>The tool coupling plate was designed using a combination of a CAD model of the E3D Titan Aqua and the default E3D V6/Bondtech tool plate. </div></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>[[Media:Titan Aqua coupling plate view.png| Closeup of tool plate.]]</div></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>[[Media:Titan Aqua coupling plate view.png| Closeup of tool plate.]]</div></td></tr>
<tr><td class='diff-marker'>−</td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;"><div><del style="font-weight: bold; text-decoration: none;"></del></div></td><td colspan="2"> </td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>=== Left/Right Wing Design ===</div></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>=== Left/Right Wing Design ===</div></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>The left and right wing were simply designed to ensure the z-position of the tool plate while utilizing the same 47mm tool post design. [[Media:Titan Aqua side view.png| Closeup of side view.]]</div></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>The left and right wing were simply designed to ensure the z-position of the tool plate while utilizing the same 47mm tool post design. [[Media:Titan Aqua side view.png| Closeup of side view.]]</div></td></tr>
<tr><td class='diff-marker'>−</td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;"><div><del style="font-weight: bold; text-decoration: none;"></del></div></td><td colspan="2"> </td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>== Water Cooling Reservoir, Pump, Hoses, and Fittings ==</div></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>== Water Cooling Reservoir, Pump, Hoses, and Fittings ==</div></td></tr>
<tr><td class='diff-marker'>−</td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;"><div>[[File:Radiator and Water Pump.png|thumb|150px|left|<del class="diffchange diffchange-inline">E3D Titan Aqua with coupling plate </del>and <del class="diffchange diffchange-inline">wings attached</del>.]] The water cooling kit from E3D comes with a radiator with 12V fan, 12V pump with reservoir, nylon tubing, silicon tubing, and various fittings. The kit provides enough of the "stiffer" nylon tubing to be bundled with the stepper motor, heater, thermistor, and fan wires. As a result, there were many options for mounting the pump radiator and fan. </div></td><td class='diff-marker'>+</td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div>[[File:Radiator and Water Pump.png|thumb|150px|left|<ins class="diffchange diffchange-inline">Radiator/Fan </ins>and <ins class="diffchange diffchange-inline">Pump/Reservoir mounted on side panel</ins>.]] The water cooling kit from E3D comes with a radiator with 12V fan, 12V pump with reservoir, nylon tubing, silicon tubing, and various fittings. The kit provides enough of the "stiffer" nylon tubing to be bundled with the stepper motor, heater, thermistor, and fan wires. As a result, there were many options for mounting the pump radiator and fan. </div></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>== 12V mixed with 24V ==</div></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>== 12V mixed with 24V ==</div></td></tr>
<tr><td class='diff-marker'>−</td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;"><div> </div></td><td class='diff-marker'>+</td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div><ins class="diffchange diffchange-inline">[[File:24V to 12V buck converter.png|thumb|150px|right|12V stepdown converter.]]</ins></div></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>The Water-Cooling kit from E3D uses a 12V fan and 12V pump and therefore cannot be plugged directly into a Duet2Eth board used to drive 24V fans. As a solution, the Duet Wiki provides a solution for using mixed voltages. It involves taking 24V from the power supply and using a step-down converter (e.g. LM2596 Buck Converter DC to DC Step-Down Voltage Regulator) to provide 12V+ to your fans. Then connect the ground pins of the fans to the Duet board for control. [https://duet3d.dozuki.com/Wiki/Connecting_and_configuring_fans#Section_Using_fans_with_mixed_voltages Duet3D link for connecting fans with mixed voltages ]</div></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>The Water-Cooling kit from E3D uses a 12V fan and 12V pump and therefore cannot be plugged directly into a Duet2Eth board used to drive 24V fans. As a solution, the Duet Wiki provides a solution for using mixed voltages. It involves taking 24V from the power supply and using a step-down converter (e.g. LM2596 Buck Converter DC to DC Step-Down Voltage Regulator) to provide 12V+ to your fans. Then connect the ground pins of the fans to the Duet board for control. [https://duet3d.dozuki.com/Wiki/Connecting_and_configuring_fans#Section_Using_fans_with_mixed_voltages Duet3D link for connecting fans with mixed voltages ]</div></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td></tr>
<!-- diff cache key jubilee3d_com:diff::1.12:old-571:rev-572 -->
</table>
EMRosa
https://jubilee3d.com/index.php?title=E3D_Titan_Aqua_Mount&diff=571&oldid=prev
EMRosa at 17:21, 9 July 2020
2020-07-09T17:21:52Z
<p></p>
<table class="diff diff-contentalign-left diff-editfont-monospace" data-mw="interface">
<col class="diff-marker" />
<col class="diff-content" />
<col class="diff-marker" />
<col class="diff-content" />
<tr class="diff-title" lang="en">
<td colspan="2" style="background-color: #fff; color: #202122; text-align: center;">← Older revision</td>
<td colspan="2" style="background-color: #fff; color: #202122; text-align: center;">Revision as of 17:21, 9 July 2020</td>
</tr><tr><td colspan="2" class="diff-lineno" id="mw-diff-left-l4" >Line 4:</td>
<td colspan="2" class="diff-lineno">Line 4:</td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>== Adapting the Default Tool Plate to mount an E3D Titan Aqua==</div></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>== Adapting the Default Tool Plate to mount an E3D Titan Aqua==</div></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>The E3D Titan Aqua includes E3D's own "compact but powerful" NEMA17 extruder stepper motor but in order to minimize the tools impact on usable Y area, an LDO compact stepper was chosen; The LDO variant is 14mm more shallow.[[Media:E3D vs LDO compact stepper.png| Photo of comparison.]]</div></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>The E3D Titan Aqua includes E3D's own "compact but powerful" NEMA17 extruder stepper motor but in order to minimize the tools impact on usable Y area, an LDO compact stepper was chosen; The LDO variant is 14mm more shallow.[[Media:E3D vs LDO compact stepper.png| Photo of comparison.]]</div></td></tr>
<tr><td class='diff-marker'>−</td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;"><div><del style="font-weight: bold; text-decoration: none;"></del></div></td><td colspan="2"> </td></tr>
<tr><td class='diff-marker'>−</td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;"><div><del style="font-weight: bold; text-decoration: none;"></del></div></td><td colspan="2"> </td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>=== Coupler Plate design ===</div></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>=== Coupler Plate design ===</div></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>The tool coupling plate was designed using a combination of a CAD model of the E3D Titan Aqua and the default E3D V6/Bondtech tool plate. </div></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>The tool coupling plate was designed using a combination of a CAD model of the E3D Titan Aqua and the default E3D V6/Bondtech tool plate. </div></td></tr>
<tr><td colspan="2" class="diff-lineno" id="mw-diff-left-l14" >Line 14:</td>
<td colspan="2" class="diff-lineno">Line 12:</td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>== Water Cooling Reservoir, Pump, Hoses, and Fittings ==</div></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>== Water Cooling Reservoir, Pump, Hoses, and Fittings ==</div></td></tr>
<tr><td class='diff-marker'>−</td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;"><div>[[File:Radiator and Water Pump.png|thumb|150px|<del class="diffchange diffchange-inline">right</del>|E3D Titan Aqua with coupling plate and wings attached.]]</div></td><td class='diff-marker'>+</td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div>[[File:Radiator and Water Pump.png|thumb|150px|<ins class="diffchange diffchange-inline">left</ins>|E3D Titan Aqua with coupling plate and wings attached.]] <ins class="diffchange diffchange-inline">The water cooling kit from E3D comes with a radiator with 12V fan, 12V pump with reservoir, nylon tubing, silicon tubing, and various fittings. The kit provides enough of the "stiffer" nylon tubing to be bundled with the stepper motor, heater, thermistor, and fan wires. As a result, there were many options for mounting the pump radiator and fan. </ins></div></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>== 12V mixed with 24V ==</div></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>== 12V mixed with 24V ==</div></td></tr>
<!-- diff cache key jubilee3d_com:diff::1.12:old-570:rev-571 -->
</table>
EMRosa
https://jubilee3d.com/index.php?title=E3D_Titan_Aqua_Mount&diff=570&oldid=prev
EMRosa at 16:53, 9 July 2020
2020-07-09T16:53:47Z
<p></p>
<table class="diff diff-contentalign-left diff-editfont-monospace" data-mw="interface">
<col class="diff-marker" />
<col class="diff-content" />
<col class="diff-marker" />
<col class="diff-content" />
<tr class="diff-title" lang="en">
<td colspan="2" style="background-color: #fff; color: #202122; text-align: center;">← Older revision</td>
<td colspan="2" style="background-color: #fff; color: #202122; text-align: center;">Revision as of 16:53, 9 July 2020</td>
</tr><tr><td colspan="2" class="diff-lineno" id="mw-diff-left-l3" >Line 3:</td>
<td colspan="2" class="diff-lineno">Line 3:</td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>== Adapting the Default Tool Plate to mount an E3D Titan Aqua==</div></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>== Adapting the Default Tool Plate to mount an E3D Titan Aqua==</div></td></tr>
<tr><td class='diff-marker'>−</td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;"><div>The E3D Titan Aqua includes E3D's own "compact but powerful" NEMA17 extruder stepper motor but in order to minimize the tools impact on usable Y area, an LDO compact stepper was chosen; The LDO variant is 14mm more shallow.[[Media:E3D vs LDO compact stepper.png|Photo of comparison]]</div></td><td class='diff-marker'>+</td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div>The E3D Titan Aqua includes E3D's own "compact but powerful" NEMA17 extruder stepper motor but in order to minimize the tools impact on usable Y area, an LDO compact stepper was chosen; The LDO variant is 14mm more shallow.[[Media:E3D vs LDO compact stepper.png| Photo of comparison<ins class="diffchange diffchange-inline">.</ins>]]</div></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>=== Coupler Plate design ===</div></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>=== Coupler Plate design ===</div></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>The tool coupling plate was designed using a combination of a CAD model of the E3D Titan Aqua and the default E3D V6/Bondtech tool plate. </div></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>The tool coupling plate was designed using a combination of a CAD model of the E3D Titan Aqua and the default E3D V6/Bondtech tool plate. </div></td></tr>
<tr><td class='diff-marker'>−</td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;"><div>[[Media:Titan Aqua coupling plate view.png|<del class="diffchange diffchange-inline">closeup </del>of tool plate]]</div></td><td class='diff-marker'>+</td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div>[[Media:Titan Aqua coupling plate view.png| <ins class="diffchange diffchange-inline">Closeup </ins>of tool plate<ins class="diffchange diffchange-inline">.</ins>]]</div></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>=== Left/Right Wing Design ===</div></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>=== Left/Right Wing Design ===</div></td></tr>
<tr><td class='diff-marker'>−</td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;"><div>The left and right wing were simply designed to ensure the z-position of the tool plate while utilizing the same 47mm tool post design. [[Media:Titan Aqua side view.png|<del class="diffchange diffchange-inline">closeup </del>of <del class="diffchange diffchange-inline">tool plate</del>]]</div></td><td class='diff-marker'>+</td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div>The left and right wing were simply designed to ensure the z-position of the tool plate while utilizing the same 47mm tool post design. [[Media:Titan Aqua side view.png| <ins class="diffchange diffchange-inline">Closeup </ins>of <ins class="diffchange diffchange-inline">side view.</ins>]]</div></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>== Water Cooling Reservoir, Pump, Hoses, and Fittings ==</div></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>== Water Cooling Reservoir, Pump, Hoses, and Fittings ==</div></td></tr>
<tr><td class='diff-marker'>−</td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;"><div> </div></td><td class='diff-marker'>+</td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div><ins class="diffchange diffchange-inline">[[File:Radiator and Water Pump.png|thumb|150px|right|E3D Titan Aqua with coupling plate and wings attached.]]</ins></div></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>== 12V mixed with 24V ==</div></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>== 12V mixed with 24V ==</div></td></tr>
<tr><td colspan="2" class="diff-lineno" id="mw-diff-left-l24" >Line 24:</td>
<td colspan="2" class="diff-lineno">Line 24:</td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>== Effect on Other Tools ==</div></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>== Effect on Other Tools ==</div></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td></tr>
<tr><td class='diff-marker'>−</td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;"><div>As a result of the increased size in Y over the default tool, the other tools' coupling plates needed offsetting. This design problem can be solved many ways; we chose to us a 15mm "spacer" with two 15mm M3 standoff press-fit into it. </div></td><td class='diff-marker'>+</td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div>As a result of the increased size in Y over the default tool, the other tools' coupling plates needed offsetting. This design problem can be solved many ways; we chose to us a 15mm "spacer" with two 15mm M3 standoff press-fit into it. <ins class="diffchange diffchange-inline">[[Media:15mm spacer installed on default tool post.png| Closeup of spacer implementation.]]</ins></div></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>Unfortunately, tool sag is a problem with this configuration. As a result, this spacer is seen as a temporary solution while designing an elongated tool post to correctly move the tool out along Y and maintaining a square face to the carriage coupling plate would be preferential.</div></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>Unfortunately, tool sag is a problem with this configuration. As a result, this spacer is seen as a temporary solution while designing an elongated tool post to correctly move the tool out along Y and maintaining a square face to the carriage coupling plate would be preferential.</div></td></tr>
<!-- diff cache key jubilee3d_com:diff::1.12:old-569:rev-570 -->
</table>
EMRosa