Difference between revisions of "3D Printed Parts"
Jump to navigation
Jump to search
Poofjunior (talk | contribs) |
Poofjunior (talk | contribs) |
||
(12 intermediate revisions by 2 users not shown) | |||
Line 9: | Line 9: | ||
* outer perimeter layer first | * outer perimeter layer first | ||
* 2-3mm brim recommended, but not required | * 2-3mm brim recommended, but not required | ||
+ | * ''uncheck'' "Detect Thin Walls" if your Slicer has this settings. | ||
+ | ** Otherwise, small gaps will not be filled. | ||
However, exceptions do exist! Please check the breakdown below for exceptions. | However, exceptions do exist! Please check the breakdown below for exceptions. | ||
Line 17: | Line 19: | ||
== Frame Printed Parts and Quantities == | == Frame Printed Parts and Quantities == | ||
− | + | {| class="wikitable sortable" | |
− | + | |- | |
− | + | ! Quantity !! Part Source !! Note | |
− | + | |- | |
− | + | | 1 || [https://github.com/machineagency/jubilee/blob/master/frame/fabrication_exports/3d_printed_parts/frame/psu_socket_holder.STL PSU Socket Holder] || | |
− | + | |- | |
− | + | | 1 || [https://github.com/machineagency/jubilee/blob/master/frame/fabrication_exports/3d_printed_parts/frame/left_crossbar_pulley_reinforcement_plate.STL Left Crossbar Pulley Reinforcement Plate] || | |
− | + | |- | |
− | + | | 1 || [https://github.com/machineagency/jubilee/blob/master/frame/fabrication_exports/3d_printed_parts/frame/right_crossbar_pulley_reinforcement_plate.STL Right Crossbar Pulley Reinforcement Plate] || | |
− | + | |- | |
− | + | | 1 || [https://github.com/machineagency/jubilee/blob/master/frame/fabrication_exports/3d_printed_parts/frame/left_corner_pulley_reinforcement_plate.STL Left Corner Pulley Reinforcement Plate] || | |
− | + | |- | |
− | + | | 1 || [https://github.com/machineagency/jubilee/blob/master/frame/fabrication_exports/3d_printed_parts/frame/right_corner_pulley_reinforcement_plate.STL Right Corner Pulley Reinforcement Plate] || | |
− | + | |- | |
− | + | | 2 || [https://github.com/machineagency/jubilee/blob/master/frame/fabrication_exports/3d_printed_parts/frame/motor_reinforcement_plate.STL Motor Reinforcement Plate] || | |
− | + | |- | |
− | + | | 1 || [https://github.com/machineagency/jubilee/blob/master/frame/fabrication_exports/3d_printed_parts/frame/x_limit_trigger.STL x_limit_trigger.STL] || | |
− | + | |- | |
− | + | | 3 || [https://github.com/machineagency/jubilee/blob/master/frame/fabrication_exports/3d_printed_parts/frame/z_thrust_bearing_spacer.STL z_thrust_bearing_spacer.STL] || | |
− | + | |- | |
− | + | | 1 || [https://github.com/machineagency/jubilee/blob/master/frame/fabrication_exports/3d_printed_parts/frame/back_z_motor_plate.STL back_z_motor_plate.STL] || | |
− | + | |- | |
− | + | | 1 || [https://github.com/machineagency/jubilee/blob/master/frame/fabrication_exports/3d_printed_parts/frame/front_left_z_motor_plate.STL front_left_z_motor_plate.STL] || | |
− | + | |- | |
− | + | | 1 || [https://github.com/machineagency/jubilee/blob/master/frame/fabrication_exports/3d_printed_parts/frame/front_right_z_motor_plate.STL front_right_z_motor_plate.STL] || | |
− | + | |- | |
− | + | | 2 || [https://github.com/machineagency/jubilee/blob/master/frame/fabrication_exports/3d_printed_parts/frame/belt_clasp.STL belt_clasp.STL] || | |
− | + | |- | |
− | + | | 1 || [https://github.com/machineagency/jubilee/blob/master/frame/fabrication_exports/3d_printed_parts/frame/back_right_foot.STL back_right_foot.STL] || 2 perimeter layers is sufficient | |
− | + | |- | |
− | + | | 1 || [https://github.com/machineagency/jubilee/blob/master/frame/fabrication_exports/3d_printed_parts/frame/back_left_foot.STL back_left_foot.STL] || 2 perimeter layers is sufficient | |
− | + | |- | |
− | + | | 1 || [https://github.com/machineagency/jubilee/blob/master/frame/fabrication_exports/3d_printed_parts/frame/front_right_foot.STL front_right_foot.STL] || 2 perimeter layers is sufficient | |
− | + | |- | |
+ | | 1 || [https://github.com/machineagency/jubilee/blob/master/frame/fabrication_exports/3d_printed_parts/frame/front_left_foot.STL front_left_foot.STL] || 2 perimeter layers is sufficient | ||
+ | |- | ||
+ | | 1 || [https://github.com/machineagency/jubilee/blob/master/frame/fabrication_exports/3d_printed_parts/frame/front_left_bed_coupling_lift.STL front_left_bed_coupling_lift.STL] || | ||
+ | |- | ||
+ | | 1 || [https://github.com/machineagency/jubilee/blob/master/frame/fabrication_exports/3d_printed_parts/frame/front_right_bed_coupling_lift.STL front_right_bed_coupling_lift.STL] || | ||
+ | |- | ||
+ | | 1 || [https://github.com/machineagency/jubilee/blob/master/frame/fabrication_exports/3d_printed_parts/frame/back_bed_coupling_lift.STL back_bed_coupling_lift.STL] || | ||
+ | |- | ||
+ | | 1 || [https://github.com/machineagency/jubilee/blob/master/frame/fabrication_exports/3d_printed_parts/frame/left_motor_corner_bracket_spacer.STL left_motor_corner_plate_spacer.STL] || | ||
+ | |- | ||
+ | | 1 || [https://github.com/machineagency/jubilee/blob/master/frame/fabrication_exports/3d_printed_parts/frame/right_motor_corner_bracket_spacer.STL right_motor_corner_plate_spacer.STL] || | ||
+ | |- | ||
+ | | 1 || [https://github.com/machineagency/jubilee/blob/master/frame/fabrication_exports/3d_printed_parts/frame/left_double_pulley_corner_bracket.STL left_double_pulley_corner_bracket.STL] || print with support material | ||
+ | |- | ||
+ | | 1 || [https://github.com/machineagency/jubilee/blob/master/frame/fabrication_exports/3d_printed_parts/frame/right_double_pulley_corner_bracket.STL right_double_pulley_corner_bracket.STL] || print with support material | ||
+ | |- | ||
+ | | 4 || [https://github.com/machineagency/jubilee/blob/master/frame/fabrication_exports/3d_printed_parts/frame/printed_pulley_spacer.STL printed_pulley_spacer.STL] || | ||
+ | |} | ||
== Toolchanger Parts and Quantities == | == Toolchanger Parts and Quantities == | ||
− | + | {| class="wikitable sortable" | |
− | + | |- | |
− | + | ! Quantity !! Part Source !! Note | |
− | + | |- | |
− | + | | 1 || [https://github.com/machineagency/jubilee/blob/master/frame/fabrication_exports/3d_printed_parts/toolchanger/toolchange_carriage/spring_guide_capture.STL spring_guide_capture.stl] || | |
− | + | |- | |
− | + | | 1 || [https://github.com/machineagency/jubilee/blob/master/frame/fabrication_exports/3d_printed_parts/toolchanger/toolchange_carriage/twist_lock_spacer.STL twist_lock_spacer.STL] || | |
− | + | |- | |
− | + | | 1 || [https://github.com/machineagency/jubilee/blob/master/frame/fabrication_exports/3d_printed_parts/toolchanger/toolchange_carriage/carriage_back_plate.STL carriage_back_plate.STL] || | |
− | + | |- | |
− | + | | 1 || [https://github.com/machineagency/jubilee/blob/master/frame/fabrication_exports/3d_printed_parts/toolchanger/toolchange_carriage/carriage_center_plate.STL carriage_center_plate.STL] || | |
− | + | |- | |
− | + | | 1 || [https://github.com/machineagency/jubilee/blob/master/frame/fabrication_exports/3d_printed_parts/toolchanger/toolchange_carriage/carriage_coupler_plate.STL carriage_coupler_plate.STL] || | |
+ | |- | ||
+ | | 1 || [https://github.com/machineagency/jubilee/blob/master/frame/fabrication_exports/3d_printed_parts/toolchanger/toolchange_carriage/carriage_pulley.STL carriage_pulley.STL] || | ||
+ | |- | ||
+ | | 1 || [https://github.com/machineagency/jubilee/blob/master/frame/fabrication_exports/3d_printed_parts/toolchanger/toolchanger_locking_mechanism/fixed_half_pulley.STL fixed_half_pulley.STL] || | ||
+ | |- | ||
+ | | 1 || [https://github.com/machineagency/jubilee/blob/master/frame/fabrication_exports/3d_printed_parts/toolchanger/toolchanger_locking_mechanism/knob.STL knob.STL] || | ||
+ | |- | ||
+ | | 1 || [https://github.com/machineagency/jubilee/blob/master/frame/fabrication_exports/3d_printed_parts/toolchanger/toolchanger_locking_mechanism/floating_half_pulley.STL floating_half_pulley.STL] || print with support material | ||
+ | |- | ||
+ | | 1 || [https://github.com/machineagency/jubilee/blob/master/frame/fabrication_exports/3d_printed_parts/toolchanger/toolchanger_locking_mechanism/lock_actuator_base_plate.STL lock_actuator_base_plate.STL] '''or''' [https://github.com/machineagency/jubilee/blob/master/frame/fabrication_exports/3d_printed_parts/toolchanger/toolchanger_locking_mechanism/stepper_online/lock_actuator_base_plate.STL stepperonline_lock_actuator_base_plate.STL] || | ||
+ | |- | ||
+ | | 1 || [https://github.com/machineagency/jubilee/blob/master/frame/fabrication_exports/3d_printed_parts/toolchanger/toolchanger_locking_mechanism/lock_actuator_motor_clip.STL lock_actuator_motor_clip.STL] '''or''' [https://github.com/machineagency/jubilee/blob/master/frame/fabrication_exports/3d_printed_parts/toolchanger/toolchanger_locking_mechanism/stepper_online/lock_actuator_motor_clip.STL stepperonline_lock_actuator_motor_clip.STL] || | ||
+ | |- | ||
+ | | 1 || [https://github.com/machineagency/jubilee/blob/master/frame/fabrication_exports/3d_printed_parts/toolchanger/toolchanger_locking_mechanism/spring_guide_anchor_block.STL spring_guide_anchor_block.STL] || OPTIONAL | ||
+ | |} | ||
=== Extruder-Specific Frame Parts === | === Extruder-Specific Frame Parts === | ||
− | + | {| class="wikitable sortable" | |
− | + | |- | |
− | + | ! Quantity !! Part Source !! Note | |
− | + | |- | |
+ | | 1 || [https://github.com/machineagency/jubilee/blob/master/tools/jubilee_tools/tools/extruders/direct_drive_bondtech_groovemount_extruder/fabrication_exports/ooze_wiper.STL ooze_wiper.STL] || ''per tool'' | ||
+ | |- | ||
+ | | 1 || [https://github.com/machineagency/jubilee/blob/master/tools/jubilee_tools/tools/extruders/direct_drive_bondtech_groovemount_extruder/fabrication_exports/tool_cable_management_bracket.STL tool_cable_management_bracket.STL] || ''per tool'' | ||
+ | |- | ||
+ | | 1 || [https://github.com/machineagency/jubilee/blob/master/tools/jubilee_tools/tool_posts/configurable_tool_post/fabrication_exports/parking_post_base_47mm.STL parking_post_base_47mm.STL] || ''per tool'' | ||
+ | |- | ||
+ | | 1 || [https://github.com/machineagency/jubilee/blob/master/tools/jubilee_tools/tool_posts/configurable_tool_post/fabrication_exports/tool_holder_47mm.STL tool_holder_47mm.STL] || ''per tool'' | ||
+ | |} | ||
== Assembly Fixtures Parts and Quantities == | == Assembly Fixtures Parts and Quantities == | ||
− | + | {| class="wikitable sortable" | |
− | + | |- | |
− | + | ! Quantity !! Part Source !! Note | |
+ | |- | ||
+ | | 1 || [https://github.com/machineagency/jubilee/blob/master/tools/assembly_fixtures/coupling_plate_pin_insertion_fixture.STL coupling_plate_pin_insertion_fixture.STL] || | ||
+ | |- | ||
+ | | 1 || [https://github.com/machineagency/jubilee/blob/dev/jubilee_2.2.0/tools/assembly_fixtures/z_lift_pin_insertion_fixture.STL z_lift_pin_insertion_fixture.STL] || | ||
+ | |} | ||
== Deprecated Parts == | == Deprecated Parts == | ||
These parts are no longer necessary in the latest version. They are: | These parts are no longer necessary in the latest version. They are: | ||
− | + | ||
− | + | {| class="wikitable sortable" | |
− | + | |- | |
− | + | ! Quantity !! Part Source !! Note | |
− | + | |- | |
− | + | | 1 || [https://github.com/machineagency/jubilee/blob/master/frame/fabrication_exports/3d_printed_parts/frame/front_left_leadscrew_retainer.STL front_left_leadscrew_retainer.STL] || | |
+ | |- | ||
+ | | 1 || [https://github.com/machineagency/jubilee/blob/master/frame/fabrication_exports/3d_printed_parts/frame/front_right_leadscrew_retainer.STL front_right_leadscrew_retainer.STL] || | ||
+ | |- | ||
+ | | 1 || [https://github.com/machineagency/jubilee/blob/master/frame/fabrication_exports/3d_printed_parts/frame/back_leadscrew_retainer.STL back_leadscrew_retainer.STL] || | ||
+ | |- | ||
+ | | 1 || [https://github.com/machineagency/jubilee/blob/master/frame/fabrication_exports/3d_printed_parts/frame/left_motor_plate.STL left_motor_plate.STL] || print from PETG | ||
+ | '''Note''': an [https://www.mandalaroseworks.com/jubilee/stepperMounts aluminum version] of this part is now available. | ||
+ | |- | ||
+ | | 1 || [https://github.com/machineagency/jubilee/blob/master/frame/fabrication_exports/3d_printed_parts/frame/right_motor_plate.STL right_motor_plate.STL] || print from PETG | ||
+ | '''Note''': an [https://www.mandalaroseworks.com/jubilee/stepperMounts aluminum version] of this part is now available. | ||
+ | |- | ||
+ | | 8 || [https://github.com/machineagency/jubilee/blob/master/tools/assembly_fixtures/outer_frame_squaring_plate.STL outer_frame_squaring_plate.STL] || | ||
+ | |} |
Revision as of 23:34, 11 December 2020
Default Print Settings
Print all parts with the following print settings:
- PLA
- 0.4mm nozzle
- No supports
- 0.2mm layer height
- 6 perimeter layers (This is especially critical for parts that have heat-set inserts)
- 20% infill * printable in the provided orientations
- outer perimeter layer first
- 2-3mm brim recommended, but not required
- uncheck "Detect Thin Walls" if your Slicer has this settings.
- Otherwise, small gaps will not be filled.
However, exceptions do exist! Please check the breakdown below for exceptions.
Note that parts that peel off the bed with a small curl cannot be used. They must stick to the bed such that they remain flat.
Other materials, such as PETG, may also work. We welcome feedback on various materials if others find them successful.
Frame Printed Parts and Quantities
Quantity | Part Source | Note |
---|---|---|
1 | PSU Socket Holder | |
1 | Left Crossbar Pulley Reinforcement Plate | |
1 | Right Crossbar Pulley Reinforcement Plate | |
1 | Left Corner Pulley Reinforcement Plate | |
1 | Right Corner Pulley Reinforcement Plate | |
2 | Motor Reinforcement Plate | |
1 | x_limit_trigger.STL | |
3 | z_thrust_bearing_spacer.STL | |
1 | back_z_motor_plate.STL | |
1 | front_left_z_motor_plate.STL | |
1 | front_right_z_motor_plate.STL | |
2 | belt_clasp.STL | |
1 | back_right_foot.STL | 2 perimeter layers is sufficient |
1 | back_left_foot.STL | 2 perimeter layers is sufficient |
1 | front_right_foot.STL | 2 perimeter layers is sufficient |
1 | front_left_foot.STL | 2 perimeter layers is sufficient |
1 | front_left_bed_coupling_lift.STL | |
1 | front_right_bed_coupling_lift.STL | |
1 | back_bed_coupling_lift.STL | |
1 | left_motor_corner_plate_spacer.STL | |
1 | right_motor_corner_plate_spacer.STL | |
1 | left_double_pulley_corner_bracket.STL | print with support material |
1 | right_double_pulley_corner_bracket.STL | print with support material |
4 | printed_pulley_spacer.STL |
Toolchanger Parts and Quantities
Quantity | Part Source | Note |
---|---|---|
1 | spring_guide_capture.stl | |
1 | twist_lock_spacer.STL | |
1 | carriage_back_plate.STL | |
1 | carriage_center_plate.STL | |
1 | carriage_coupler_plate.STL | |
1 | carriage_pulley.STL | |
1 | fixed_half_pulley.STL | |
1 | knob.STL | |
1 | floating_half_pulley.STL | print with support material |
1 | lock_actuator_base_plate.STL or stepperonline_lock_actuator_base_plate.STL | |
1 | lock_actuator_motor_clip.STL or stepperonline_lock_actuator_motor_clip.STL | |
1 | spring_guide_anchor_block.STL | OPTIONAL |
Extruder-Specific Frame Parts
Quantity | Part Source | Note |
---|---|---|
1 | ooze_wiper.STL | per tool |
1 | tool_cable_management_bracket.STL | per tool |
1 | parking_post_base_47mm.STL | per tool |
1 | tool_holder_47mm.STL | per tool |
Assembly Fixtures Parts and Quantities
Quantity | Part Source | Note |
---|---|---|
1 | coupling_plate_pin_insertion_fixture.STL | |
1 | z_lift_pin_insertion_fixture.STL |
Deprecated Parts
These parts are no longer necessary in the latest version. They are:
Quantity | Part Source | Note |
---|---|---|
1 | front_left_leadscrew_retainer.STL | |
1 | front_right_leadscrew_retainer.STL | |
1 | back_leadscrew_retainer.STL | |
1 | left_motor_plate.STL | print from PETG
Note: an aluminum version of this part is now available. |
1 | right_motor_plate.STL | print from PETG
Note: an aluminum version of this part is now available. |
8 | outer_frame_squaring_plate.STL |