Difference between revisions of "3D Printed Parts"

From Jubilee
Jump to navigation Jump to search
(19 intermediate revisions by 4 users not shown)
Line 9: Line 9:
 
* outer perimeter layer first
 
* outer perimeter layer first
 
* 2-3mm brim recommended, but not required
 
* 2-3mm brim recommended, but not required
 +
* ''uncheck'' "Detect Thin Walls" if your Slicer has this settings.
 +
** Otherwise, small gaps will not be filled.
  
 
However, exceptions do exist! Please check the breakdown below for exceptions.
 
However, exceptions do exist! Please check the breakdown below for exceptions.
Line 17: Line 19:
  
 
== Frame Printed Parts and Quantities ==
 
== Frame Printed Parts and Quantities ==
−
 
+
{| class="wikitable sortable"
−
* 1x [https://github.com/machineagency/jubilee/blob/master/frame/fabrication_exports/3d_printed_parts/frame/psu_socket_holder.STL PSU Socket Holder]
+
|-
−
* 1x [https://github.com/machineagency/jubilee/blob/master/frame/fabrication_exports/3d_printed_parts/frame/left_crossbar_pulley_reinforcement_plate.STL Left Crossbar Pulley Reinforcement Plate]
+
! Quantity !! Part Source !! Note
−
* 1x [https://github.com/machineagency/jubilee/blob/master/frame/fabrication_exports/3d_printed_parts/frame/right_crossbar_pulley_reinforcement_plate.STL Right Crossbar Pulley Reinforcement Plate]
+
|-
−
* 1x [https://github.com/machineagency/jubilee/blob/master/frame/fabrication_exports/3d_printed_parts/frame/left_corner_pulley_reinforcement_plate.STL Left Corner Pulley Reinforcement Plate]
+
| 1 || [https://github.com/machineagency/jubilee/blob/master/frame/fabrication_exports/3d_printed_parts/frame/psu_socket_holder.STL PSU Socket Holder] ||
−
* 1x [https://github.com/machineagency/jubilee/blob/master/frame/fabrication_exports/3d_printed_parts/frame/right_corner_pulley_reinforcement_plate.STL Right Corner Pulley Reinforcement Plate]
+
|-
−
* 2x [https://github.com/machineagency/jubilee/blob/master/frame/fabrication_exports/3d_printed_parts/frame/motor_reinforcement_plate.STL Motor Reinforcement Plate]
+
| 1 || [https://github.com/machineagency/jubilee/blob/master/frame/fabrication_exports/3d_printed_parts/frame/left_crossbar_pulley_reinforcement_plate.STL Left Crossbar Pulley Reinforcement Plate] ||
−
* 1x [https://github.com/machineagency/jubilee/blob/master/frame/fabrication_exports/3d_printed_parts/frame/x_limit_trigger.STL x_limit_trigger.STL]
+
|-
−
* 3x [https://github.com/machineagency/jubilee/blob/master/frame/fabrication_exports/3d_printed_parts/frame/z_thrust_bearing_spacer.STL z_thrust_bearing_spacer.STL]
+
| 1 || [https://github.com/machineagency/jubilee/blob/master/frame/fabrication_exports/3d_printed_parts/frame/right_crossbar_pulley_reinforcement_plate.STL Right Crossbar Pulley Reinforcement Plate] ||
−
* 1x [https://github.com/machineagency/jubilee/blob/master/frame/fabrication_exports/3d_printed_parts/frame/back_z_motor_plate.STL back_z_motor_plate.STL]
+
|-
−
* 1x [https://github.com/machineagency/jubilee/blob/master/frame/fabrication_exports/3d_printed_parts/frame/front_left_z_motor_plate.STL front_left_z_motor_plate.STL]
+
| 1 || [https://github.com/machineagency/jubilee/blob/master/frame/fabrication_exports/3d_printed_parts/frame/left_corner_pulley_reinforcement_plate.STL Left Corner Pulley Reinforcement Plate] ||
−
* 1x [https://github.com/machineagency/jubilee/blob/master/frame/fabrication_exports/3d_printed_parts/frame/front_right_z_motor_plate.STL front_right_z_motor_plate.STL]
+
|-
−
* 2x [https://github.com/machineagency/jubilee/blob/master/frame/fabrication_exports/3d_printed_parts/frame/belt_clasp.STL belt_clasp.STL]
+
| 1 || [https://github.com/machineagency/jubilee/blob/master/frame/fabrication_exports/3d_printed_parts/frame/right_corner_pulley_reinforcement_plate.STL Right Corner Pulley Reinforcement Plate] ||
−
* 1x [https://github.com/machineagency/jubilee/blob/master/frame/fabrication_exports/3d_printed_parts/frame/front_left_leadscrew_retainer.STL front_left_leadscrew_retainer.STL]
+
|-
−
* 1x [https://github.com/machineagency/jubilee/blob/master/frame/fabrication_exports/3d_printed_parts/frame/front_right_leadscrew_retainer.STL front_right_leadscrew_retainer.STL]
+
| 2 || [https://github.com/machineagency/jubilee/blob/master/frame/fabrication_exports/3d_printed_parts/frame/motor_reinforcement_plate.STL Motor Reinforcement Plate] ||
−
* 1x [https://github.com/machineagency/jubilee/blob/master/frame/fabrication_exports/3d_printed_parts/frame/back_leadscrew_retainer.STL back_leadscrew_retainer.STL]
+
|-
−
* 1x [https://github.com/machineagency/jubilee/blob/master/frame/fabrication_exports/3d_printed_parts/frame/back_right_foot.STL back_right_foot.STL]
+
| 1 || [https://github.com/machineagency/jubilee/blob/master/frame/fabrication_exports/3d_printed_parts/frame/x_limit_trigger.STL x_limit_trigger.STL] ||
−
** 2 perimeter layers is sufficient
+
|-
−
* 1x [https://github.com/machineagency/jubilee/blob/master/frame/fabrication_exports/3d_printed_parts/frame/back_left_foot.STL back_left_foot.STL]
+
| 3 || [https://github.com/machineagency/jubilee/blob/master/frame/fabrication_exports/3d_printed_parts/frame/z_thrust_bearing_spacer.STL z_thrust_bearing_spacer.STL] ||
−
** 2 perimeter layers is sufficient
+
|-
−
* 1x [https://github.com/machineagency/jubilee/blob/master/frame/fabrication_exports/3d_printed_parts/frame/front_right_foot.STL front_right_foot.STL]
+
| 1 || [https://github.com/machineagency/jubilee/blob/master/frame/fabrication_exports/3d_printed_parts/frame/back_z_motor_plate.STL back_z_motor_plate.STL] ||
−
** 2 perimeter layers is sufficient
+
|-
−
* 1x [https://github.com/machineagency/jubilee/blob/master/frame/fabrication_exports/3d_printed_parts/frame/front_left_foot.STL front_left_foot.STL]
+
| 1 || [https://github.com/machineagency/jubilee/blob/master/frame/fabrication_exports/3d_printed_parts/frame/front_left_z_motor_plate.STL front_left_z_motor_plate.STL] ||
−
** 2 perimeter layers is sufficient
+
|-
−
* 1x [https://github.com/machineagency/jubilee/blob/master/frame/fabrication_exports/3d_printed_parts/frame/front_left_bed_coupling_lift.STL front_left_bed_coupling_lift.STL]
+
| 1 || [https://github.com/machineagency/jubilee/blob/master/frame/fabrication_exports/3d_printed_parts/frame/front_right_z_motor_plate.STL front_right_z_motor_plate.STL] ||
−
* 1x [https://github.com/machineagency/jubilee/blob/master/frame/fabrication_exports/3d_printed_parts/frame/front_right_bed_coupling_lift.STL front_right_bed_coupling_lift.STL]
+
|-
−
* 1x [https://github.com/machineagency/jubilee/blob/master/frame/fabrication_exports/3d_printed_parts/frame/back_bed_coupling_lift.STL back_bed_coupling_lift.STL]
+
| 2 || [https://github.com/machineagency/jubilee/blob/master/frame/fabrication_exports/3d_printed_parts/frame/belt_clasp.STL belt_clasp.STL] ||
−
* 1x [https://github.com/machineagency/jubilee/blob/master/frame/fabrication_exports/3d_printed_parts/frame/left_motor_corner_bracket_spacer.STL left_motor_corner_plate_spacer.STL]
+
|-
−
* 1x [https://github.com/machineagency/jubilee/blob/master/frame/fabrication_exports/3d_printed_parts/frame/right_motor_corner_bracket_spacer.STL right_motor_corner_plate_spacer.STL]
+
| 1 || [https://github.com/machineagency/jubilee/blob/master/frame/fabrication_exports/3d_printed_parts/frame/back_right_foot.STL back_right_foot.STL] || 2 perimeter layers is sufficient
−
* 1x [https://github.com/machineagency/jubilee/blob/master/frame/fabrication_exports/3d_printed_parts/frame/left_double_pulley_corner_bracket.STL left_double_pulley_corner_bracket.STL]
+
|-
−
** print with support material
+
| 1 || [https://github.com/machineagency/jubilee/blob/master/frame/fabrication_exports/3d_printed_parts/frame/back_left_foot.STL back_left_foot.STL] || 2 perimeter layers is sufficient
−
* 1x [https://github.com/machineagency/jubilee/blob/master/frame/fabrication_exports/3d_printed_parts/frame/right_double_pulley_corner_bracket.STL right_double_pulley_corner_bracket.STL]
+
|-
−
** print with support material
+
| 1 || [https://github.com/machineagency/jubilee/blob/master/frame/fabrication_exports/3d_printed_parts/frame/front_right_foot.STL front_right_foot.STL] || 2 perimeter layers is sufficient
−
* 4x [https://github.com/machineagency/jubilee/blob/master/frame/fabrication_exports/3d_printed_parts/frame/printed_pulley_spacer.STL printed_pulley_spacer.STL]
+
|-
 +
| 1 || [https://github.com/machineagency/jubilee/blob/master/frame/fabrication_exports/3d_printed_parts/frame/front_left_foot.STL front_left_foot.STL] || 2 perimeter layers is sufficient
 +
|-
 +
| 1 || [https://github.com/machineagency/jubilee/blob/master/frame/fabrication_exports/3d_printed_parts/frame/front_left_bed_coupling_lift.STL front_left_bed_coupling_lift.STL] ||
 +
|-
 +
| 1 || [https://github.com/machineagency/jubilee/blob/master/frame/fabrication_exports/3d_printed_parts/frame/front_right_bed_coupling_lift.STL front_right_bed_coupling_lift.STL] ||
 +
|-
 +
| 1 || [https://github.com/machineagency/jubilee/blob/master/frame/fabrication_exports/3d_printed_parts/frame/back_bed_coupling_lift.STL back_bed_coupling_lift.STL] ||
 +
|-
 +
| 1 || [https://github.com/machineagency/jubilee/blob/master/frame/fabrication_exports/3d_printed_parts/frame/left_motor_corner_bracket_spacer.STL left_motor_corner_bracket_spacer.STL] ||
 +
|-
 +
| 1 || [https://github.com/machineagency/jubilee/blob/master/frame/fabrication_exports/3d_printed_parts/frame/right_motor_corner_bracket_spacer.STL right_motor_corner_bracket_spacer.STL] ||
 +
|-
 +
| 1 || [https://github.com/machineagency/jubilee/blob/master/frame/fabrication_exports/3d_printed_parts/frame/left_double_pulley_corner_bracket.STL left_double_pulley_corner_bracket.STL] || print with support material
 +
|-
 +
| 1 || [https://github.com/machineagency/jubilee/blob/master/frame/fabrication_exports/3d_printed_parts/frame/right_double_pulley_corner_bracket.STL right_double_pulley_corner_bracket.STL] || print with support material
 +
|-
 +
| 4 || [https://github.com/machineagency/jubilee/blob/master/frame/fabrication_exports/3d_printed_parts/frame/printed_pulley_spacer.STL printed_pulley_spacer.STL] ||
 +
|}
  
 
== Toolchanger Parts and Quantities ==
 
== Toolchanger Parts and Quantities ==
−
* 1x [https://github.com/machineagency/jubilee/blob/master/frame/fabrication_exports/3d_printed_parts/toolchanger/toolchange_carriage/spring_guide_capture.STL spring_guide_capture.stl]
+
{| class="wikitable sortable"
−
* 1x [https://github.com/machineagency/jubilee/blob/master/frame/fabrication_exports/3d_printed_parts/toolchanger/toolchange_carriage/twist_lock_spacer.STL twist_lock_spacer.STL]
+
|-
−
* 1x [https://github.com/machineagency/jubilee/blob/master/frame/fabrication_exports/3d_printed_parts/toolchanger/toolchange_carriage/carriage_back_plate.STL carriage_back_plate.STL]
+
! Quantity !! Part Source !! Note
−
* 1x [https://github.com/machineagency/jubilee/blob/master/frame/fabrication_exports/3d_printed_parts/toolchanger/toolchange_carriage/carriage_center_plate.STL carriage_center_plate.STL]
+
|-
−
* 1x [https://github.com/machineagency/jubilee/blob/master/frame/fabrication_exports/3d_printed_parts/toolchanger/toolchange_carriage/carriage_coupler_plate.STL carriage_coupler_plate.STL]
+
| 1 || [https://github.com/machineagency/jubilee/blob/master/frame/fabrication_exports/3d_printed_parts/toolchanger/toolchange_carriage/spring_guide_capture.STL spring_guide_capture.stl] ||
−
* 1x [https://github.com/machineagency/jubilee/blob/master/frame/fabrication_exports/3d_printed_parts/toolchanger/toolchange_carriage/carriage_pulley.STL carriage_pulley.STL]
+
|-
−
* 1x [https://github.com/machineagency/jubilee/blob/master/frame/fabrication_exports/3d_printed_parts/toolchanger/toolchanger_locking_mechanism/fixed_half_pulley.STL fixed_half_pulley.STL]
+
| 1 || [https://github.com/machineagency/jubilee/blob/master/frame/fabrication_exports/3d_printed_parts/toolchanger/toolchange_carriage/twist_lock_spacer.STL twist_lock_spacer.STL] ||
−
* 1x [https://github.com/machineagency/jubilee/blob/master/frame/fabrication_exports/3d_printed_parts/toolchanger/toolchanger_locking_mechanism/knob.STL knob.STL]
+
|-
−
* 1x [https://github.com/machineagency/jubilee/blob/master/frame/fabrication_exports/3d_printed_parts/toolchanger/toolchanger_locking_mechanism/floating_half_pulley.STL floating_half_pulley.STL]
+
| 1 || [https://github.com/machineagency/jubilee/blob/master/frame/fabrication_exports/3d_printed_parts/toolchanger/toolchange_carriage/carriage_back_plate.STL carriage_back_plate.STL] ||
−
** print with support material
+
|-
−
* 1x [https://github.com/machineagency/jubilee/blob/master/frame/fabrication_exports/3d_printed_parts/toolchanger/toolchanger_locking_mechanism/lock_actuator_base_plate.STL lock_actuator_base_plate.STL] '''or''' [https://github.com/machineagency/jubilee/blob/master/frame/fabrication_exports/3d_printed_parts/toolchanger/toolchanger_locking_mechanism/stepper_online/lock_actuator_base_plate.STL stepperonline_lock_actuator_base_plate.STL]
+
| 1 || [https://github.com/machineagency/jubilee/blob/master/frame/fabrication_exports/3d_printed_parts/toolchanger/toolchange_carriage/carriage_center_plate.STL carriage_center_plate.STL] ||
−
* 1x [https://github.com/machineagency/jubilee/blob/master/frame/fabrication_exports/3d_printed_parts/toolchanger/toolchanger_locking_mechanism/lock_actuator_motor_clip.STL lock_actuator_motor_clip.STL] '''or''' [https://github.com/machineagency/jubilee/blob/master/frame/fabrication_exports/3d_printed_parts/toolchanger/toolchanger_locking_mechanism/stepper_online/lock_actuator_motor_clip.STL stepperonline_lock_actuator_motor_clip.STL]
+
|-
−
* 1x OPTTIONAL [https://github.com/machineagency/jubilee/blob/master/frame/fabrication_exports/3d_printed_parts/toolchanger/toolchanger_locking_mechanism/spring_guide_anchor_block.STL spring_guide_anchor_block.STL]
+
| 1 || [https://github.com/machineagency/jubilee/blob/master/frame/fabrication_exports/3d_printed_parts/toolchanger/toolchange_carriage/carriage_coupler_plate.STL carriage_coupler_plate.STL] ||
 +
|-
 +
| 1 || [https://github.com/machineagency/jubilee/blob/master/frame/fabrication_exports/3d_printed_parts/toolchanger/toolchange_carriage/carriage_pulley.STL carriage_pulley.STL] ||
 +
|-
 +
| 1 || [https://github.com/machineagency/jubilee/blob/master/frame/fabrication_exports/3d_printed_parts/toolchanger/toolchanger_locking_mechanism/fixed_half_pulley.STL fixed_half_pulley.STL] ||
 +
|-
 +
| 1 || [https://github.com/machineagency/jubilee/blob/master/frame/fabrication_exports/3d_printed_parts/toolchanger/toolchanger_locking_mechanism/knob.STL knob.STL] ||
 +
|-
 +
| 1 || [https://github.com/machineagency/jubilee/blob/master/frame/fabrication_exports/3d_printed_parts/toolchanger/toolchanger_locking_mechanism/floating_half_pulley.STL floating_half_pulley.STL] || print with support material.
 +
Do not print from a matte or composite material, which adds friction to the spring's sliding surface.
 +
|-
 +
| 1 || [https://github.com/machineagency/jubilee/blob/master/frame/fabrication_exports/3d_printed_parts/toolchanger/toolchanger_locking_mechanism/lock_actuator_base_plate.STL lock_actuator_base_plate.STL] '''or''' [https://github.com/machineagency/jubilee/blob/master/frame/fabrication_exports/3d_printed_parts/toolchanger/toolchanger_locking_mechanism/stepper_online/lock_actuator_base_plate.STL stepperonline_lock_actuator_base_plate.STL] ||
 +
|-
 +
| 1 || [https://github.com/machineagency/jubilee/blob/master/frame/fabrication_exports/3d_printed_parts/toolchanger/toolchanger_locking_mechanism/lock_actuator_motor_clip.STL lock_actuator_motor_clip.STL] '''or''' [https://github.com/machineagency/jubilee/blob/master/frame/fabrication_exports/3d_printed_parts/toolchanger/toolchanger_locking_mechanism/stepper_online/lock_actuator_motor_clip.STL stepperonline_lock_actuator_motor_clip.STL] ||
 +
|-
 +
| 1 || [https://github.com/machineagency/jubilee/blob/master/frame/fabrication_exports/3d_printed_parts/toolchanger/toolchanger_locking_mechanism/spring_guide_anchor_block.STL spring_guide_anchor_block.STL] || OPTIONAL
 +
|}
  
 
=== Extruder-Specific Frame Parts ===
 
=== Extruder-Specific Frame Parts ===
  
−
* 1x [https://github.com/machineagency/jubilee/blob/master/tools/jubilee_tools/tools/extruders/direct_drive_bondtech_groovemount_extruder/fabrication_exports/ooze_wiper.STL ooze_wiper.STL] ''per tool''
+
{| class="wikitable sortable"
−
* 1x [https://github.com/machineagency/jubilee/blob/master/tools/jubilee_tools/tools/extruders/direct_drive_bondtech_groovemount_extruder/fabrication_exports/tool_cable_management_bracket.STL tool_cable_management_bracket.STL] ''per tool''
+
|-
−
* 1x [https://github.com/machineagency/jubilee/blob/master/tools/jubilee_tools/tool_posts/configurable_tool_post/fabrication_exports/parking_post_base_47mm.STL parking_post_base_47mm.STL] ''per tool''
+
! Quantity !! Part Source !! Note
−
* 1x [https://github.com/machineagency/jubilee/blob/master/tools/jubilee_tools/tool_posts/configurable_tool_post/fabrication_exports/tool_holder_47mm.STL tool_holder_47mm.STL] ''per tool''
+
|-
 +
| 1 || [https://github.com/machineagency/jubilee/blob/master/tools/jubilee_tools/tools/extruders/ooze_wipers/fabrication_exports/ooze_wiper.STL ooze_wiper.STL] || ''per tool''
 +
|-
 +
| 1 || [https://github.com/machineagency/jubilee/blob/master/tools/jubilee_tools/tools/extruders/direct_drive_bondtech_groovemount_extruder/fabrication_exports/tool_cable_management_bracket.STL tool_cable_management_bracket.STL] || ''per tool''
 +
|-
 +
| 1 || [https://github.com/machineagency/jubilee/blob/master/tools/jubilee_tools/tool_posts/configurable_tool_post/fabrication_exports/parking_post_base_47mm.STL parking_post_base_47mm.STL] || ''per tool''
 +
|-
 +
| 1 || [https://github.com/machineagency/jubilee/blob/master/tools/jubilee_tools/tool_posts/configurable_tool_post/fabrication_exports/tool_holder_47mm.STL tool_holder_47mm.STL] || ''per tool''
 +
|}
  
 
== Assembly Fixtures Parts and Quantities ==
 
== Assembly Fixtures Parts and Quantities ==
  
−
* 1x [https://github.com/machineagency/jubilee/blob/master/tools/assembly_fixtures/coupling_plate_pin_insertion_fixture.STL coupling_plate_pin_insertion_fixture.STL]
+
{| class="wikitable sortable"
−
* 1x [https://github.com/machineagency/jubilee/blob/master/tools/assembly_fixtures/z_lift_pin_insertion_fixture.STL z_lift_pin_insertion_fixture.STL]
+
|-
−
* 8x [https://github.com/machineagency/jubilee/blob/master/tools/assembly_fixtures/outer_frame_squaring_plate.STL outer_frame_squaring_plate.STL]
+
! Quantity !! Part Source !! Note
 +
|-
 +
| 1 || [https://github.com/machineagency/jubilee/blob/master/tools/assembly_fixtures/coupling_plate_pin_insertion_fixture.STL coupling_plate_pin_insertion_fixture.STL] ||
 +
|-
 +
| 1 || [https://github.com/machineagency/jubilee/blob/dev/jubilee_2.2.0/tools/assembly_fixtures/z_lift_pin_insertion_fixture.STL z_lift_pin_insertion_fixture.STL] ||
 +
|}
  
 
== Deprecated Parts ==
 
== Deprecated Parts ==
−
Some parts are no longer necessary in the latest version. They are:
+
These parts are no longer necessary in the latest version. They are:
−
* 1x [https://github.com/machineagency/jubilee/blob/master/frame/fabrication_exports/3d_printed_parts/frame/left_motor_plate.STL left_motor_plate.STL]
+
 
−
** print from PETG
+
{| class="wikitable sortable"
−
** Note: an [https://www.mandalaroseworks.com/jubilee/stepperMounts aluminum version] of this part is now available.
+
|-
−
* 1x [https://github.com/machineagency/jubilee/blob/master/frame/fabrication_exports/3d_printed_parts/frame/right_motor_plate.STL right_motor_plate.STL]
+
! Quantity !! Part Source !! Note
−
** print from PETG
+
|-
−
** Note: an [https://www.mandalaroseworks.com/jubilee/stepperMounts aluminum version] of this part is now available.
+
| 1 || [https://github.com/machineagency/jubilee/blob/master/frame/fabrication_exports/3d_printed_parts/frame/front_left_leadscrew_retainer.STL front_left_leadscrew_retainer.STL] ||
 +
|-
 +
| 1 || [https://github.com/machineagency/jubilee/blob/master/frame/fabrication_exports/3d_printed_parts/frame/front_right_leadscrew_retainer.STL front_right_leadscrew_retainer.STL] ||
 +
|-
 +
| 1 || [https://github.com/machineagency/jubilee/blob/master/frame/fabrication_exports/3d_printed_parts/frame/back_leadscrew_retainer.STL back_leadscrew_retainer.STL] ||
 +
|-
 +
| 1 || [https://github.com/machineagency/jubilee/blob/master/frame/fabrication_exports/3d_printed_parts/frame/left_motor_plate.STL left_motor_plate.STL] ||  print from PETG
 +
'''Note''': an [https://www.mandalaroseworks.com/jubilee/stepperMounts aluminum version] of this part is now available.
 +
|-
 +
| 1 || [https://github.com/machineagency/jubilee/blob/master/frame/fabrication_exports/3d_printed_parts/frame/right_motor_plate.STL right_motor_plate.STL] ||  print from PETG
 +
'''Note''': an [https://www.mandalaroseworks.com/jubilee/stepperMounts aluminum version] of this part is now available.
 +
|-
 +
| 8 || [https://github.com/machineagency/jubilee/blob/master/tools/assembly_fixtures/outer_frame_squaring_plate.STL outer_frame_squaring_plate.STL] ||
 +
|}

Revision as of 12:17, 28 March 2021

Default Print Settings

Print all parts with the following print settings:

  • PLA
  • 0.4mm nozzle
  • No supports
  • 0.2mm layer height
  • 6 perimeter layers (This is especially critical for parts that have heat-set inserts)
  • 20% infill * printable in the provided orientations
  • outer perimeter layer first
  • 2-3mm brim recommended, but not required
  • uncheck "Detect Thin Walls" if your Slicer has this settings.
    • Otherwise, small gaps will not be filled.

However, exceptions do exist! Please check the breakdown below for exceptions.

Note that parts that peel off the bed with a small curl cannot be used. They must stick to the bed such that they remain flat.

Other materials, such as PETG, may also work. We welcome feedback on various materials if others find them successful.

Frame Printed Parts and Quantities

Quantity Part Source Note
1 PSU Socket Holder
1 Left Crossbar Pulley Reinforcement Plate
1 Right Crossbar Pulley Reinforcement Plate
1 Left Corner Pulley Reinforcement Plate
1 Right Corner Pulley Reinforcement Plate
2 Motor Reinforcement Plate
1 x_limit_trigger.STL
3 z_thrust_bearing_spacer.STL
1 back_z_motor_plate.STL
1 front_left_z_motor_plate.STL
1 front_right_z_motor_plate.STL
2 belt_clasp.STL
1 back_right_foot.STL 2 perimeter layers is sufficient
1 back_left_foot.STL 2 perimeter layers is sufficient
1 front_right_foot.STL 2 perimeter layers is sufficient
1 front_left_foot.STL 2 perimeter layers is sufficient
1 front_left_bed_coupling_lift.STL
1 front_right_bed_coupling_lift.STL
1 back_bed_coupling_lift.STL
1 left_motor_corner_bracket_spacer.STL
1 right_motor_corner_bracket_spacer.STL
1 left_double_pulley_corner_bracket.STL print with support material
1 right_double_pulley_corner_bracket.STL print with support material
4 printed_pulley_spacer.STL

Toolchanger Parts and Quantities

Quantity Part Source Note
1 spring_guide_capture.stl
1 twist_lock_spacer.STL
1 carriage_back_plate.STL
1 carriage_center_plate.STL
1 carriage_coupler_plate.STL
1 carriage_pulley.STL
1 fixed_half_pulley.STL
1 knob.STL
1 floating_half_pulley.STL print with support material.

Do not print from a matte or composite material, which adds friction to the spring's sliding surface.

1 lock_actuator_base_plate.STL or stepperonline_lock_actuator_base_plate.STL
1 lock_actuator_motor_clip.STL or stepperonline_lock_actuator_motor_clip.STL
1 spring_guide_anchor_block.STL OPTIONAL

Extruder-Specific Frame Parts

Quantity Part Source Note
1 ooze_wiper.STL per tool
1 tool_cable_management_bracket.STL per tool
1 parking_post_base_47mm.STL per tool
1 tool_holder_47mm.STL per tool

Assembly Fixtures Parts and Quantities

Quantity Part Source Note
1 coupling_plate_pin_insertion_fixture.STL
1 z_lift_pin_insertion_fixture.STL

Deprecated Parts

These parts are no longer necessary in the latest version. They are:

Quantity Part Source Note
1 front_left_leadscrew_retainer.STL
1 front_right_leadscrew_retainer.STL
1 back_leadscrew_retainer.STL
1 left_motor_plate.STL print from PETG

Note: an aluminum version of this part is now available.

1 right_motor_plate.STL print from PETG

Note: an aluminum version of this part is now available.

8 outer_frame_squaring_plate.STL
Retrieved from "https://jubilee3d.com/index.php?title=3D_Printed_Parts&oldid=4094"