Difference between revisions of "3D Printed Parts"

From Jubilee
Jump to navigation Jump to search
(20 intermediate revisions by 3 users not shown)
Line 8: Line 8:
 
* 20% infill * printable in the provided orientations
 
* 20% infill * printable in the provided orientations
 
* outer perimeter layer first
 
* outer perimeter layer first
−
* 2-3mm brim recommended, but not required
 
 
* ''uncheck'' "Detect Thin Walls" if your Slicer has this settings.
 
* ''uncheck'' "Detect Thin Walls" if your Slicer has this settings.
 
** Otherwise, small gaps will not be filled.
 
** Otherwise, small gaps will not be filled.
Line 21: Line 20:
 
{| class="wikitable sortable"
 
{| class="wikitable sortable"
 
|-
 
|-
−
! Quantity !! Part Source !! Note
+
! Quantity !! Part Num !! Part Source !! Note
 +
|-
 +
| 1 || PSH-xx || [https://github.com/machineagency/jubilee/blob/main/frame/fabrication_exports/3d_printed_parts/frame/psu_socket_holder.STL PSU Socket Holder] || Default BOM option
 
|-
 
|-
−
| 1 || [https://github.com/machineagency/jubilee/blob/master/frame/fabrication_exports/3d_printed_parts/frame/psu_socket_holder.STL PSU Socket Holder] ||  
+
| 1 || PSH1-xx || [https://github.com/machineagency/jubilee/blob/main/frame/fabrication_exports/3d_printed_parts/frame/psu_socket_holder_big.STL Big PSU Socket Holder] || larger clearance hole for most other generic sockets
 
|-
 
|-
−
| 1 || [https://github.com/machineagency/jubilee/blob/master/frame/fabrication_exports/3d_printed_parts/frame/left_crossbar_pulley_reinforcement_plate.STL Left Crossbar Pulley Reinforcement Plate] ||  
+
| 1 || PSH2-xx || [https://github.com/machineagency/jubilee/blob/main/frame/fabrication_exports/3d_printed_parts/frame/psu_socket_holder_astrodyne.STL Astrodyne PSU Socket Holder] || socket holder for the PSU sold in Filastruder kits.
 
|-
 
|-
−
| 1 || [https://github.com/machineagency/jubilee/blob/master/frame/fabrication_exports/3d_printed_parts/frame/right_crossbar_pulley_reinforcement_plate.STL Right Crossbar Pulley Reinforcement Plate] ||  
+
| 1 || LXR-xx || [https://github.com/machineagency/jubilee/blob/main/frame/fabrication_exports/3d_printed_parts/frame/left_crossbar_pulley_reinforcement_plate.STL Left Crossbar Pulley Reinforcement Plate] ||  
 
|-
 
|-
−
| 1 || [https://github.com/machineagency/jubilee/blob/master/frame/fabrication_exports/3d_printed_parts/frame/left_corner_pulley_reinforcement_plate.STL Left Corner Pulley Reinforcement Plate] ||  
+
| 1 || RXR-xx || [https://github.com/machineagency/jubilee/blob/main/frame/fabrication_exports/3d_printed_parts/frame/right_crossbar_pulley_reinforcement_plate.STL Right Crossbar Pulley Reinforcement Plate] ||  
 
|-
 
|-
−
| 1 || [https://github.com/machineagency/jubilee/blob/master/frame/fabrication_exports/3d_printed_parts/frame/right_corner_pulley_reinforcement_plate.STL Right Corner Pulley Reinforcement Plate] ||  
+
| 1 || LCR-xx || [https://github.com/machineagency/jubilee/blob/main/frame/fabrication_exports/3d_printed_parts/frame/left_corner_pulley_reinforcement_plate.STL Left Corner Pulley Reinforcement Plate] ||  
 
|-
 
|-
−
| 2 || [https://github.com/machineagency/jubilee/blob/master/frame/fabrication_exports/3d_printed_parts/frame/motor_reinforcement_plate.STL Motor Reinforcement Plate] ||  
+
| 1 || RCR-xx || [https://github.com/machineagency/jubilee/blob/main/frame/fabrication_exports/3d_printed_parts/frame/right_corner_pulley_reinforcement_plate.STL Right Corner Pulley Reinforcement Plate] ||  
 
|-
 
|-
−
| 1 || [https://github.com/machineagency/jubilee/blob/master/frame/fabrication_exports/3d_printed_parts/frame/x_limit_trigger.STL x_limit_trigger.STL] ||  
+
| 2 || MRP-xx || [https://github.com/machineagency/jubilee/blob/main/frame/fabrication_exports/3d_printed_parts/frame/motor_reinforcement_plate.STL Motor Reinforcement Plate] ||  
 
|-
 
|-
−
| 3 || [https://github.com/machineagency/jubilee/blob/master/frame/fabrication_exports/3d_printed_parts/frame/z_thrust_bearing_spacer.STL z_thrust_bearing_spacer.STL] ||  
+
| 1 || -- || [https://github.com/machineagency/jubilee/blob/main/frame/fabrication_exports/3d_printed_parts/frame/x_limit_trigger.STL x_limit_trigger.STL] ||  
 
|-
 
|-
−
| 1 || [https://github.com/machineagency/jubilee/blob/master/frame/fabrication_exports/3d_printed_parts/frame/back_z_motor_plate.STL back_z_motor_plate.STL] ||  
+
| 1 || -- || [https://github.com/machineagency/jubilee/blob/main/frame/fabrication_exports/3d_printed_parts/frame/x_axis_hard_stop.STL x_axis_hard_stop.STL] ||  
 
|-
 
|-
−
| 1 || [https://github.com/machineagency/jubilee/blob/master/frame/fabrication_exports/3d_printed_parts/frame/front_left_z_motor_plate.STL front_left_z_motor_plate.STL] ||  
+
| 3 || -- || [https://github.com/machineagency/jubilee/blob/main/frame/fabrication_exports/3d_printed_parts/frame/z_thrust_bearing_spacer.STL z_thrust_bearing_spacer.STL] ||  
 
|-
 
|-
−
| 1 || [https://github.com/machineagency/jubilee/blob/master/frame/fabrication_exports/3d_printed_parts/frame/front_right_z_motor_plate.STL front_right_z_motor_plate.STL] ||  
+
| 3 || -- || [https://github.com/machineagency/jubilee/blob/main/frame/fabrication_exports/3d_printed_parts/frame/z_carriage_retainer.STL z_carriage_retainer.STL] ||  
 
|-
 
|-
−
| 2 || [https://github.com/machineagency/jubilee/blob/master/frame/fabrication_exports/3d_printed_parts/frame/belt_clasp.STL belt_clasp.STL] ||  
+
| 1 || BZP-xx || [https://github.com/machineagency/jubilee/blob/main/frame/fabrication_exports/3d_printed_parts/frame/back_z_motor_plate.STL back_z_motor_plate.STL] ||  
 
|-
 
|-
−
| 1 || [https://github.com/machineagency/jubilee/blob/master/frame/fabrication_exports/3d_printed_parts/frame/front_left_leadscrew_retainer.STL front_left_leadscrew_retainer.STL] ||  
+
| 1 || LZP-xx || [https://github.com/machineagency/jubilee/blob/main/frame/fabrication_exports/3d_printed_parts/frame/front_left_z_motor_plate.STL front_left_z_motor_plate.STL] ||  
 
|-
 
|-
−
| 1 || [https://github.com/machineagency/jubilee/blob/master/frame/fabrication_exports/3d_printed_parts/frame/front_right_leadscrew_retainer.STL front_right_leadscrew_retainer.STL] ||
+
| 1 || RZP-xx || [https://github.com/machineagency/jubilee/blob/main/frame/fabrication_exports/3d_printed_parts/frame/front_right_z_motor_plate.STL front_right_z_motor_plate.STL] ||  
 
|-
 
|-
−
| 1 || [https://github.com/machineagency/jubilee/blob/master/frame/fabrication_exports/3d_printed_parts/frame/back_leadscrew_retainer.STL back_leadscrew_retainer.STL] ||
+
| 2 || -- || [https://github.com/machineagency/jubilee/blob/main/frame/fabrication_exports/3d_printed_parts/frame/belt_clasp.STL belt_clasp.STL] ||  
 
|-
 
|-
−
| 1 || [https://github.com/machineagency/jubilee/blob/master/frame/fabrication_exports/3d_printed_parts/frame/back_right_foot.STL back_right_foot.STL] || 2 perimeter layers is sufficient
+
| 1 || BRF-xx || [https://github.com/machineagency/jubilee/blob/main/frame/fabrication_exports/3d_printed_parts/frame/back_right_foot.STL back_right_foot.STL] || 2 perimeter layers is sufficient
 
|-
 
|-
−
| 1 || [https://github.com/machineagency/jubilee/blob/master/frame/fabrication_exports/3d_printed_parts/frame/back_left_foot.STL back_left_foot.STL] || 2 perimeter layers is sufficient
+
| 1 || LRF-xx || [https://github.com/machineagency/jubilee/blob/main/frame/fabrication_exports/3d_printed_parts/frame/back_left_foot.STL back_left_foot.STL] || 2 perimeter layers is sufficient
 
|-
 
|-
−
| 1 || [https://github.com/machineagency/jubilee/blob/master/frame/fabrication_exports/3d_printed_parts/frame/front_right_foot.STL front_right_foot.STL] || 2 perimeter layers is sufficient
+
| 1 || FRF-xx|| [https://github.com/machineagency/jubilee/blob/main/frame/fabrication_exports/3d_printed_parts/frame/front_right_foot.STL front_right_foot.STL] || 2 perimeter layers is sufficient
 
|-
 
|-
−
| 1 || [https://github.com/machineagency/jubilee/blob/master/frame/fabrication_exports/3d_printed_parts/frame/front_left_foot.STL front_left_foot.STL] || 2 perimeter layers is sufficient
+
| 1 || FLF-xx || [https://github.com/machineagency/jubilee/blob/main/frame/fabrication_exports/3d_printed_parts/frame/front_left_foot.STL front_left_foot.STL] || 2 perimeter layers is sufficient
 
|-
 
|-
−
| 1 || [https://github.com/machineagency/jubilee/blob/master/frame/fabrication_exports/3d_printed_parts/frame/front_left_bed_coupling_lift.STL front_left_bed_coupling_lift.STL] ||  
+
| 1 || LBC-xx  || [https://github.com/machineagency/jubilee/blob/main/frame/fabrication_exports/3d_printed_parts/frame/front_left_bed_coupling_lift.STL front_left_bed_coupling_lift.STL] ||  
 
|-
 
|-
−
| 1 || [https://github.com/machineagency/jubilee/blob/master/frame/fabrication_exports/3d_printed_parts/frame/front_right_bed_coupling_lift.STL front_right_bed_coupling_lift.STL] ||  
+
| 1 || RBC-xx || [https://github.com/machineagency/jubilee/blob/main/frame/fabrication_exports/3d_printed_parts/frame/front_right_bed_coupling_lift.STL front_right_bed_coupling_lift.STL] ||  
 
|-
 
|-
−
| 1 || [https://github.com/machineagency/jubilee/blob/master/frame/fabrication_exports/3d_printed_parts/frame/back_bed_coupling_lift.STL back_bed_coupling_lift.STL] ||  
+
| 1 || BBC-x || [https://github.com/machineagency/jubilee/blob/main/frame/fabrication_exports/3d_printed_parts/frame/back_bed_coupling_lift.STL back_bed_coupling_lift.STL] ||  
 
|-
 
|-
−
| 1 || [https://github.com/machineagency/jubilee/blob/master/frame/fabrication_exports/3d_printed_parts/frame/left_motor_corner_bracket_spacer.STL left_motor_corner_plate_spacer.STL] ||  
+
| 1 || LMS-xx || [https://github.com/machineagency/jubilee/blob/main/frame/fabrication_exports/3d_printed_parts/frame/left_motor_corner_bracket_spacer.STL left_motor_corner_bracket_spacer.STL] ||  
 
|-
 
|-
−
| 1 || [https://github.com/machineagency/jubilee/blob/master/frame/fabrication_exports/3d_printed_parts/frame/right_motor_corner_bracket_spacer.STL right_motor_corner_plate_spacer.STL] ||  
+
| 1 || RMS-xx || [https://github.com/machineagency/jubilee/blob/main/frame/fabrication_exports/3d_printed_parts/frame/right_motor_corner_bracket_spacer.STL right_motor_corner_bracket_spacer.STL] ||  
 
|-
 
|-
−
| 1 || [https://github.com/machineagency/jubilee/blob/master/frame/fabrication_exports/3d_printed_parts/frame/left_double_pulley_corner_bracket.STL left_double_pulley_corner_bracket.STL] || print with support material
+
| 1 || LCP-xx || [https://github.com/machineagency/jubilee/blob/main/frame/fabrication_exports/3d_printed_parts/frame/left_double_pulley_corner_bracket.STL left_double_pulley_corner_bracket.STL] || print with support material
 
|-
 
|-
−
| 1 || [https://github.com/machineagency/jubilee/blob/master/frame/fabrication_exports/3d_printed_parts/frame/right_double_pulley_corner_bracket.STL right_double_pulley_corner_bracket.STL] || print with support material
+
| 1 || RCP-xx || [https://github.com/machineagency/jubilee/blob/main/frame/fabrication_exports/3d_printed_parts/frame/right_double_pulley_corner_bracket.STL right_double_pulley_corner_bracket.STL] || print with support material
 
|-
 
|-
−
| 4 || [https://github.com/machineagency/jubilee/blob/master/frame/fabrication_exports/3d_printed_parts/frame/printed_pulley_spacer.STL printed_pulley_spacer.STL] ||  
+
| 4 || -- || [https://github.com/machineagency/jubilee/blob/main/frame/fabrication_exports/3d_printed_parts/frame/printed_pulley_spacer.STL printed_pulley_spacer.STL] ||  
 
|}
 
|}
  
Line 83: Line 84:
 
! Quantity !! Part Source !! Note
 
! Quantity !! Part Source !! Note
 
|-
 
|-
−
| 1 || [https://github.com/machineagency/jubilee/blob/master/frame/fabrication_exports/3d_printed_parts/toolchanger/toolchange_carriage/spring_guide_capture.STL spring_guide_capture.stl] ||
+
| 1 || SGC-xx || [https://github.com/machineagency/jubilee/blob/main/frame/fabrication_exports/3d_printed_parts/toolchanger/toolchange_carriage/spring_guide_capture.STL spring_guide_capture.stl] ||
 
|-
 
|-
−
| 1 || [https://github.com/machineagency/jubilee/blob/master/frame/fabrication_exports/3d_printed_parts/toolchanger/toolchange_carriage/twist_lock_spacer.STL twist_lock_spacer.STL] ||
+
| 1 || -- || [https://github.com/machineagency/jubilee/blob/main/frame/fabrication_exports/3d_printed_parts/toolchanger/toolchange_carriage/twist_lock_spacer.STL twist_lock_spacer.STL] ||
 
|-
 
|-
−
| 1 || [https://github.com/machineagency/jubilee/blob/master/frame/fabrication_exports/3d_printed_parts/toolchanger/toolchange_carriage/carriage_back_plate.STL carriage_back_plate.STL] ||
+
| 1 || CBP-xx || [https://github.com/machineagency/jubilee/blob/main/frame/fabrication_exports/3d_printed_parts/toolchanger/toolchange_carriage/carriage_back_plate.STL carriage_back_plate.STL] ||
 
|-
 
|-
−
| 1 || [https://github.com/machineagency/jubilee/blob/master/frame/fabrication_exports/3d_printed_parts/toolchanger/toolchange_carriage/carriage_center_plate.STL carriage_center_plate.STL] ||
+
| 1 || CCP-xx || [https://github.com/machineagency/jubilee/blob/main/frame/fabrication_exports/3d_printed_parts/toolchanger/toolchange_carriage/carriage_center_plate.STL carriage_center_plate.STL] ||
 
|-
 
|-
−
| 1 || [https://github.com/machineagency/jubilee/blob/master/frame/fabrication_exports/3d_printed_parts/toolchanger/toolchange_carriage/carriage_coupler_plate.STL carriage_coupler_plate.STL] ||
+
| 1 || CFP-xx || [https://github.com/machineagency/jubilee/blob/main/frame/fabrication_exports/3d_printed_parts/toolchanger/toolchange_carriage/carriage_coupler_plate.STL carriage_coupler_plate.STL] ||
 
|-
 
|-
−
| 1 || [https://github.com/machineagency/jubilee/blob/master/frame/fabrication_exports/3d_printed_parts/toolchanger/toolchange_carriage/carriage_pulley.STL carriage_pulley.STL] ||
+
| 1 || CPL-xx || [https://github.com/machineagency/jubilee/blob/main/frame/fabrication_exports/3d_printed_parts/toolchanger/toolchange_carriage/carriage_pulley.STL carriage_pulley.STL] ||
 
|-
 
|-
−
| 1 || [https://github.com/machineagency/jubilee/blob/master/frame/fabrication_exports/3d_printed_parts/toolchanger/toolchanger_locking_mechanism/fixed_half_pulley.STL fixed_half_pulley.STL] ||
+
| 1 || -- || [https://github.com/machineagency/jubilee/blob/main/frame/fabrication_exports/3d_printed_parts/toolchanger/toolchanger_locking_mechanism/fixed_half_pulley.STL fixed_half_pulley.STL] ||
 
|-
 
|-
−
| 1 || [https://github.com/machineagency/jubilee/blob/master/frame/fabrication_exports/3d_printed_parts/toolchanger/toolchanger_locking_mechanism/knob.STL knob.STL] ||
+
| 1 || -- || [https://github.com/machineagency/jubilee/blob/main/frame/fabrication_exports/3d_printed_parts/toolchanger/toolchanger_locking_mechanism/knob.STL knob.STL] ||
 
|-
 
|-
−
| 1 || [https://github.com/machineagency/jubilee/blob/master/frame/fabrication_exports/3d_printed_parts/toolchanger/toolchanger_locking_mechanism/floating_half_pulley.STL floating_half_pulley.STL] || print with support material
+
| 1 || -- || [https://github.com/machineagency/jubilee/blob/main/frame/fabrication_exports/3d_printed_parts/toolchanger/toolchanger_locking_mechanism/floating_half_pulley.STL floating_half_pulley.STL] || print with support material.
 +
Do not print from a matte or composite material, which adds friction to the spring's sliding surface.
 
|-
 
|-
−
| 1 || [https://github.com/machineagency/jubilee/blob/master/frame/fabrication_exports/3d_printed_parts/toolchanger/toolchanger_locking_mechanism/lock_actuator_base_plate.STL lock_actuator_base_plate.STL] '''or''' [https://github.com/machineagency/jubilee/blob/master/frame/fabrication_exports/3d_printed_parts/toolchanger/toolchanger_locking_mechanism/stepper_online/lock_actuator_base_plate.STL stepperonline_lock_actuator_base_plate.STL] ||
+
| 1 || RLB-xx || [https://github.com/machineagency/jubilee/blob/main/frame/fabrication_exports/3d_printed_parts/toolchanger/toolchanger_locking_mechanism/lock_actuator_base_plate.STL lock_actuator_base_plate.STL] '''or''' [https://github.com/machineagency/jubilee/blob/main/frame/fabrication_exports/3d_printed_parts/toolchanger/toolchanger_locking_mechanism/stepper_online/lock_actuator_base_plate.STL stepperonline_lock_actuator_base_plate.STL] ||
 
|-
 
|-
−
| 1 || [https://github.com/machineagency/jubilee/blob/master/frame/fabrication_exports/3d_printed_parts/toolchanger/toolchanger_locking_mechanism/lock_actuator_motor_clip.STL lock_actuator_motor_clip.STL] '''or''' [https://github.com/machineagency/jubilee/blob/master/frame/fabrication_exports/3d_printed_parts/toolchanger/toolchanger_locking_mechanism/stepper_online/lock_actuator_motor_clip.STL stepperonline_lock_actuator_motor_clip.STL] ||
+
| 1 || -- || [https://github.com/machineagency/jubilee/blob/main/frame/fabrication_exports/3d_printed_parts/toolchanger/toolchanger_locking_mechanism/lock_actuator_motor_clip.STL lock_actuator_motor_clip.STL] '''or''' [https://github.com/machineagency/jubilee/blob/main/frame/fabrication_exports/3d_printed_parts/toolchanger/toolchanger_locking_mechanism/stepper_online/lock_actuator_motor_clip.STL stepperonline_lock_actuator_motor_clip.STL] ||
 
|-
 
|-
−
| 1 || [https://github.com/machineagency/jubilee/blob/master/frame/fabrication_exports/3d_printed_parts/toolchanger/toolchanger_locking_mechanism/spring_guide_anchor_block.STL spring_guide_anchor_block.STL] || OPTIONAL
+
| 1 || -- || [https://github.com/machineagency/jubilee/blob/main/frame/fabrication_exports/3d_printed_parts/toolchanger/toolchanger_locking_mechanism/spring_guide_anchor_block.STL spring_guide_anchor_block.STL] || OPTIONAL
 
|}
 
|}
  
Line 114: Line 116:
 
! Quantity !! Part Source !! Note
 
! Quantity !! Part Source !! Note
 
|-
 
|-
−
| 1 || [https://github.com/machineagency/jubilee/blob/master/tools/jubilee_tools/tools/extruders/direct_drive_bondtech_groovemount_extruder/fabrication_exports/ooze_wiper.STL ooze_wiper.STL] || ''per tool''
+
| 1 || || [https://github.com/machineagency/jubilee/blob/main/tools/jubilee_tools/tools/extruders/ooze_wipers/fabrication_exports/ooze_wiper.STL ooze_wiper.STL] || ''per tool''
 
|-
 
|-
−
| 1 || [https://github.com/machineagency/jubilee/blob/master/tools/jubilee_tools/tools/extruders/direct_drive_bondtech_groovemount_extruder/fabrication_exports/tool_cable_management_bracket.STL tool_cable_management_bracket.STL] || ''per tool''
+
| 1 || || [https://github.com/machineagency/jubilee/blob/main/tools/jubilee_tools/tools/extruders/direct_drive_bondtech_groovemount_extruder/fabrication_exports/tool_cable_management_bracket.STL tool_cable_management_bracket.STL] || ''per tool''
 
|-
 
|-
−
| 1 || [https://github.com/machineagency/jubilee/blob/master/tools/jubilee_tools/tool_posts/configurable_tool_post/fabrication_exports/parking_post_base_47mm.STL parking_post_base_47mm.STL] || ''per tool''
+
| 1 || || [https://github.com/machineagency/jubilee/blob/main/tools/jubilee_tools/tool_posts/configurable_tool_post/fabrication_exports/parking_post_base_47mm.STL parking_post_base_47mm.STL] || ''per tool''
 
|-
 
|-
−
| 1 || [https://github.com/machineagency/jubilee/blob/master/tools/jubilee_tools/tool_posts/configurable_tool_post/fabrication_exports/tool_holder_47mm.STL tool_holder_47mm.STL] || ''per tool''
+
| 1 || || [https://github.com/machineagency/jubilee/blob/main/tools/jubilee_tools/tool_posts/configurable_tool_post/fabrication_exports/tool_holder_47mm.STL tool_holder_47mm.STL] || ''per tool''
 
|}
 
|}
  
Line 129: Line 131:
 
! Quantity !! Part Source !! Note
 
! Quantity !! Part Source !! Note
 
|-
 
|-
−
| 1 || [https://github.com/machineagency/jubilee/blob/master/tools/assembly_fixtures/coupling_plate_pin_insertion_fixture.STL coupling_plate_pin_insertion_fixture.STL] ||
+
| 1 || [https://github.com/machineagency/jubilee/blob/main/tools/assembly_fixtures/coupling_plate_pin_insertion_fixture.STL coupling_plate_pin_insertion_fixture.STL] ||
 
|-
 
|-
 
| 1 || [https://github.com/machineagency/jubilee/blob/dev/jubilee_2.2.0/tools/assembly_fixtures/z_lift_pin_insertion_fixture.STL z_lift_pin_insertion_fixture.STL] ||
 
| 1 || [https://github.com/machineagency/jubilee/blob/dev/jubilee_2.2.0/tools/assembly_fixtures/z_lift_pin_insertion_fixture.STL z_lift_pin_insertion_fixture.STL] ||
Line 141: Line 143:
 
! Quantity !! Part Source !! Note
 
! Quantity !! Part Source !! Note
 
|-
 
|-
−
| 1 || [https://github.com/machineagency/jubilee/blob/master/frame/fabrication_exports/3d_printed_parts/frame/left_motor_plate.STL left_motor_plate.STL] ||  print from PETG
+
| 1 || [https://github.com/machineagency/jubilee/blob/main/frame/fabrication_exports/3d_printed_parts/frame/front_left_leadscrew_retainer.STL front_left_leadscrew_retainer.STL] ||
 +
|-
 +
| 1 || [https://github.com/machineagency/jubilee/blob/main/frame/fabrication_exports/3d_printed_parts/frame/front_right_leadscrew_retainer.STL front_right_leadscrew_retainer.STL] ||
 +
|-
 +
| 1 || [https://github.com/machineagency/jubilee/blob/main/frame/fabrication_exports/3d_printed_parts/frame/back_leadscrew_retainer.STL back_leadscrew_retainer.STL] ||
 +
|-
 +
| 1 || [https://github.com/machineagency/jubilee/blob/main/frame/fabrication_exports/3d_printed_parts/frame/left_motor_plate.STL left_motor_plate.STL] ||  print from PETG
 
'''Note''': an [https://www.mandalaroseworks.com/jubilee/stepperMounts aluminum version] of this part is now available.
 
'''Note''': an [https://www.mandalaroseworks.com/jubilee/stepperMounts aluminum version] of this part is now available.
 
|-
 
|-
−
| 1 || [https://github.com/machineagency/jubilee/blob/master/frame/fabrication_exports/3d_printed_parts/frame/right_motor_plate.STL right_motor_plate.STL] ||  print from PETG
+
| 1 || [https://github.com/machineagency/jubilee/blob/main/frame/fabrication_exports/3d_printed_parts/frame/right_motor_plate.STL right_motor_plate.STL] ||  print from PETG
 
'''Note''': an [https://www.mandalaroseworks.com/jubilee/stepperMounts aluminum version] of this part is now available.
 
'''Note''': an [https://www.mandalaroseworks.com/jubilee/stepperMounts aluminum version] of this part is now available.
 
|-
 
|-
−
| 8 || [https://github.com/machineagency/jubilee/blob/master/tools/assembly_fixtures/outer_frame_squaring_plate.STL outer_frame_squaring_plate.STL] ||
+
| 8 || [https://github.com/machineagency/jubilee/blob/main/tools/assembly_fixtures/outer_frame_squaring_plate.STL outer_frame_squaring_plate.STL] ||
 
|}
 
|}

Revision as of 17:03, 16 October 2021

Default Print Settings

Print all parts with the following print settings:

  • PLA
  • 0.4mm nozzle
  • No supports
  • 0.2mm layer height
  • 6 perimeter layers (This is especially critical for parts that have heat-set inserts)
  • 20% infill * printable in the provided orientations
  • outer perimeter layer first
  • uncheck "Detect Thin Walls" if your Slicer has this settings.
    • Otherwise, small gaps will not be filled.

However, exceptions do exist! Please check the breakdown below for exceptions.

Note that parts that peel off the bed with a small curl cannot be used. They must stick to the bed such that they remain flat.

Other materials, such as PETG, may also work. We welcome feedback on various materials if others find them successful.

Frame Printed Parts and Quantities

Quantity Part Num Part Source Note
1 PSH-xx PSU Socket Holder Default BOM option
1 PSH1-xx Big PSU Socket Holder larger clearance hole for most other generic sockets
1 PSH2-xx Astrodyne PSU Socket Holder socket holder for the PSU sold in Filastruder kits.
1 LXR-xx Left Crossbar Pulley Reinforcement Plate
1 RXR-xx Right Crossbar Pulley Reinforcement Plate
1 LCR-xx Left Corner Pulley Reinforcement Plate
1 RCR-xx Right Corner Pulley Reinforcement Plate
2 MRP-xx Motor Reinforcement Plate
1 -- x_limit_trigger.STL
1 -- x_axis_hard_stop.STL
3 -- z_thrust_bearing_spacer.STL
3 -- z_carriage_retainer.STL
1 BZP-xx back_z_motor_plate.STL
1 LZP-xx front_left_z_motor_plate.STL
1 RZP-xx front_right_z_motor_plate.STL
2 -- belt_clasp.STL
1 BRF-xx back_right_foot.STL 2 perimeter layers is sufficient
1 LRF-xx back_left_foot.STL 2 perimeter layers is sufficient
1 FRF-xx front_right_foot.STL 2 perimeter layers is sufficient
1 FLF-xx front_left_foot.STL 2 perimeter layers is sufficient
1 LBC-xx front_left_bed_coupling_lift.STL
1 RBC-xx front_right_bed_coupling_lift.STL
1 BBC-x back_bed_coupling_lift.STL
1 LMS-xx left_motor_corner_bracket_spacer.STL
1 RMS-xx right_motor_corner_bracket_spacer.STL
1 LCP-xx left_double_pulley_corner_bracket.STL print with support material
1 RCP-xx right_double_pulley_corner_bracket.STL print with support material
4 -- printed_pulley_spacer.STL

Toolchanger Parts and Quantities

Quantity Part Source Note
1 SGC-xx spring_guide_capture.stl
1 -- twist_lock_spacer.STL
1 CBP-xx carriage_back_plate.STL
1 CCP-xx carriage_center_plate.STL
1 CFP-xx carriage_coupler_plate.STL
1 CPL-xx carriage_pulley.STL
1 -- fixed_half_pulley.STL
1 -- knob.STL
1 -- floating_half_pulley.STL print with support material.

Do not print from a matte or composite material, which adds friction to the spring's sliding surface.

1 RLB-xx lock_actuator_base_plate.STL or stepperonline_lock_actuator_base_plate.STL
1 -- lock_actuator_motor_clip.STL or stepperonline_lock_actuator_motor_clip.STL
1 -- spring_guide_anchor_block.STL OPTIONAL

Extruder-Specific Frame Parts

Quantity Part Source Note
1 ooze_wiper.STL per tool
1 tool_cable_management_bracket.STL per tool
1 parking_post_base_47mm.STL per tool
1 tool_holder_47mm.STL per tool

Assembly Fixtures Parts and Quantities

Quantity Part Source Note
1 coupling_plate_pin_insertion_fixture.STL
1 z_lift_pin_insertion_fixture.STL

Deprecated Parts

These parts are no longer necessary in the latest version. They are:

Quantity Part Source Note
1 front_left_leadscrew_retainer.STL
1 front_right_leadscrew_retainer.STL
1 back_leadscrew_retainer.STL
1 left_motor_plate.STL print from PETG

Note: an aluminum version of this part is now available.

1 right_motor_plate.STL print from PETG

Note: an aluminum version of this part is now available.

8 outer_frame_squaring_plate.STL
Retrieved from "https://jubilee3d.com/index.php?title=3D_Printed_Parts&oldid=4408"