Blurolls Wiring Harness Errata

From Jubilee

Revision as of 12:18, 4 October 2021 by Poofjunior (talk | contribs) (→‎Extra Parts to Buy)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Jump to navigation Jump to search

As purchased, the Blurolls Tool Wire Harness for Jubilee 2.2 has a few mistakes that must be corrected before the wiring harness matches the wiring diagram.

Rework Tools

1x pair of SN-2549 Wire Crimpers
1x pair of conventional wire cutters
1x pair of conventional wire strippers for 22-24 AWG wires

Extra Parts to Buy

4x PH6 Pins PN: SPH-001T-P0.5L
- buy 12-20 as these are rather tricky to crimp by hand without some practice
1x LDO Motor Housing PN: PHR-6
4x Molex Micro-fit 3.0 Connector Housing PN: 0436400201
8x Molex Micro-fit 3.0 Housing Crimp Pins PN: 0430310001
- buy 12-20 as these are rather tricky to crimp by hand without some practice

Fixes to Apply

Retrieved from "https://jubilee3d.com/index.php?title=Blurolls_Wiring_Harness_Errata&oldid=4363"