Community Mods
Assembly Tools
- T-Bar Tool by edskull
- “to aid in setting offset between Carriage Faceplate and Twist Lock.”
Tools
Hemera Extruder Mounts
- Jubilee-Hemera-Tool-Mount by BryanHaven
- a work in progreess Jubilee Hemera Mount
- Hemera-Mount-Jubilee by lukeslaboratory
- “Simple Repo for the Hemera Mount that uses the e3d toolchanger plates”
E3D Titan Aqua Mount
- Jubilee Titan Aqua Tool Mount by EMRosa
- Repo of parts for Titan Aqua
- Instructions and other considerations by EMRosa
Extruder Ooze Control
- Long Ooze Wiper by HaythamB
- “A longer version of the default ooze wiper designed to fit a Hemera mount. Has 4 to 5.6 mm of clearance to the front Z-axis bed mount on Jubilee V2.”
- Ooze Blocker by HaythamB
- “Simple ooze blocker for parking nozzles over 3mm high temperature silicone pieces. Prevents nozzle ooze during parked position, and just makes life a little bit easier when doing multi-material prints.”
Frame Mods
- Springloaded Tool Post Demo by @MiasmicTruth on Discord.
- This modification ensures that the tool is pushing into the coupling when it is locked in.
- Mean Well LRS-350-24 Screw Terminal Cover by BryanHaven
- Jubilee_9mm_MGN15_Conversion by HaythamB
- “A simple repository of upgraded components to switch the Jubilee toolchanger to 9mm Gates 2GT belts, toothed and smooth idlers, and 20T pulleys, running on MGN15 rails on Y and MGN12 rails on X”
- Jubilee PanelDue7i Case - dual color by HaythamB
- “A quick remix of the case to include the Jubilee project ‘logo’ and some color on the reset button actuator.”
- Kinematic Bed Coupling for E3D Anti-Backlash Nut
- Bed Couplers compatible with E3D's AntiBacklash Nuts
- Side Panel Power Outlet Insert STL by Tsunaminaut
- Parametric Fusion 360 Model
- AC Power Entry - DigiKey STL by smoonerlater
- Tool Alignment Camera Swivel Mount by hakuro. This swivel mount mounts an upward facing camera (usable for TAMV) on a swivel mount on the back of the machine. The result is that the camera need not take up any space on the tool rack and retracts away from the bed, so the usable printing volume is unchanged.
Software Mods
- Install OpenCV
- Comprehensive installer for OpenCV on Raspbian (raspberry Pi). Does NOT install virtualized.
- Duet Web API
- Python interface to Duet RepRap V2 or V3 firmware.
- TAMV
- TAMV = Tool Align Machine Vision for Duet based tool changing 3D printers.
- Setting up TAMV on a Duet3
- Setting up a PT1000 temperature sensor by Doug on the Discord server
- A guide on how to get a PT1000 temperature sensor configured on a Duet board