Metal Carriage

From Jubilee
Revision as of 22:30, 10 May 2022 by Poofjunior (talk | contribs) (→‎3D Printed Parts and Settings)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

The metal carriage was designed and tested by @Nanotech and machined by Mandala Rose Works.

Metal tool plate.png


  • very stiff interface between tools and the motion system
  • ~93 [grams]
  • accommodates both 6 [mm] and 9 [mm] belts

3D Printed Parts and Settings

Print parts specific to your setup with the following print settings:

  • print in the provided orientations
  • PLA
  • 0.4mm nozzle
  • No supports
  • 0.2mm layer height
  • 6 perimeter layers ← this is esp important for parts with heat-set inserts
  • external perimeter first

Table TODO

Assembly Instructions

Assembly Instructions TODO