Metal Carriage

The metal carriage was designed and tested by @Nanotech and machined by Mandala Rose Works.

Specs

• very stiff interface between tools and the motion system
• ~93 [grams]
• accommodates both 6 [mm] and 9 [mm] belts

3D Printed Parts and Settings

Print parts specific to your setup with the following print settings:

• print in the provided orientations
• PLA
• 0.4mm nozzle
• No supports
• 0.2mm layer height
• 6 perimeter layers ← this is esp important for parts with heat-set inserts
• external perimeter first

• • Table TODO**