Difference between revisions of "Nozzle Cleaning"

Revision as of 19:01, 12 May 2020

This page should illustrate various approaches to wiping and cleaning FFM tool nozzles on tool changes to allow for successful and clean prints.

There is currently a model for a nozzle wiper hosted on the main Jubilee GitHub repository that is designed to work with 3mm thick silicone strips.

Revision as of 19:01, 12 May 2020 (view source) Haytham (talk \| contribs) (Created page with "This page should illustrate various approaches to wiping and cleaning FFM tool nozzles on tool changes to allow for successful and clean prints. == Nozzle Wiper == There is...")		Revision as of 19:01, 12 May 2020 (view source) Haytham (talk \| contribs) (→‎Nozzle Wiper) Newer edit →
Line 2:		Line 2:

	== Nozzle Wiper ==		== Nozzle Wiper ==
−	There is currently a [[https://github.com/machineagency/jubilee/blob/master/tools/jubilee_tools/tools/extruders/direct_drive_bondtech_groovemount_extruder/fabrication_exports/ooze_wiper.STL\|ready-made model for a nozzle wiper]] hosted on the main Jubilee GitHub repository that is designed to work with 3mm thick silicone strips.	+	There is currently a [https://github.com/machineagency/jubilee/blob/master/tools/jubilee_tools/tools/extruders/direct_drive_bondtech_groovemount_extruder/fabrication_exports/ooze_wiper.STL\|ready-made model for a nozzle wiper] hosted on the main Jubilee GitHub repository that is designed to work with 3mm thick silicone strips.