Difference between revisions of "Nozzle Cleaning"

From Jubilee
Jump to navigation Jump to search
 
(5 intermediate revisions by 2 users not shown)
Line 2: Line 2:
  
 
== Nozzle Wiper ==
 
== Nozzle Wiper ==
There is currently a [https://github.com/machineagency/jubilee/blob/master/tools/jubilee_tools/tools/extruders/direct_drive_bondtech_groovemount_extruder/fabrication_exports/ooze_wiper.STL|ready-made model for a nozzle wiper] hosted on the main Jubilee GitHub repository that is designed to work with 3mm thick silicone strips.
+
There is currently a [https://github.com/machineagency/jubilee/blob/main/tools/jubilee_tools/tools/extruders/direct_drive_bondtech_groovemount_extruder/fabrication_exports/ooze_wiper.STL ready-made model for a nozzle wiper] hosted on the main Jubilee GitHub repository that is designed to work with 3mm thick silicone strips.
 +
 
 +
One user reported very good results using baffle material for aircraft, available for $2.50 per foot from [https://www.aircraftspruce.com/catalog/appages/siliconecowlseals.php Aircraft Spruce]
  
 
== Nozzle Brush ==
 
== Nozzle Brush ==
== Advanced Nozzle Cleaning Kung-Fu ==
+
== Pebble Wiper - Servo actuated wiping system ==
 +
 
 +
More will be added here, for now see https://github.com/KevinMar1/Pebble_Wiper

Latest revision as of 13:11, 30 May 2021

This page should illustrate various approaches to wiping and cleaning FFM tool nozzles on tool changes to allow for successful and clean prints.

Nozzle Wiper

There is currently a ready-made model for a nozzle wiper hosted on the main Jubilee GitHub repository that is designed to work with 3mm thick silicone strips.

One user reported very good results using baffle material for aircraft, available for $2.50 per foot from Aircraft Spruce

Nozzle Brush

Pebble Wiper - Servo actuated wiping system

More will be added here, for now see https://github.com/KevinMar1/Pebble_Wiper