Difference between revisions of "Nozzle Cleaning"
Jump to navigation
Jump to search
m (Added a link to specific silicon baffle material.) |
Poofjunior (talk | contribs) |
||
| (3 intermediate revisions by 2 users not shown) | |||
| Line 2: | Line 2: | ||
== Nozzle Wiper == | == Nozzle Wiper == | ||
| − | There is currently a [https://github.com/machineagency/jubilee/blob/ | + | There is currently a [https://github.com/machineagency/jubilee/blob/main/tools/jubilee_tools/tools/extruders/direct_drive_bondtech_groovemount_extruder/fabrication_exports/ooze_wiper.STL ready-made model for a nozzle wiper] hosted on the main Jubilee GitHub repository that is designed to work with 3mm thick silicone strips. |
| + | |||
| + | One user reported very good results using baffle material for aircraft, available for $2.50 per foot from [https://www.aircraftspruce.com/catalog/appages/siliconecowlseals.php Aircraft Spruce] | ||
== Nozzle Brush == | == Nozzle Brush == | ||
| − | == | + | == Pebble Wiper - Servo actuated wiping system == |
| + | |||
| + | More will be added here, for now see https://github.com/KevinMar1/Pebble_Wiper | ||
Latest revision as of 13:11, 30 May 2021
This page should illustrate various approaches to wiping and cleaning FFM tool nozzles on tool changes to allow for successful and clean prints.
Nozzle Wiper
There is currently a ready-made model for a nozzle wiper hosted on the main Jubilee GitHub repository that is designed to work with 3mm thick silicone strips.
One user reported very good results using baffle material for aircraft, available for $2.50 per foot from Aircraft Spruce
Nozzle Brush
Pebble Wiper - Servo actuated wiping system
More will be added here, for now see https://github.com/KevinMar1/Pebble_Wiper