Difference between revisions of "Passive Pen Tool"
Jump to navigation
Jump to search
Poofjunior (talk | contribs) (Created page with "thumb This is a pen tool for drawing with pens up to 13mm in diameter. It does not have any active components, which means the machine's Z axis c...") |
Poofjunior (talk | contribs) |
||
Line 9: | Line 9: | ||
== Assembly Tools == | == Assembly Tools == | ||
+ | TODO | ||
+ | |||
+ | == Laser Cut Parts == | ||
TODO | TODO | ||
Line 24: | Line 27: | ||
=== Parts and Special Settings === | === Parts and Special Settings === | ||
====Pen Tool==== | ====Pen Tool==== | ||
− | [https://github.com/machineagency/jubilee/ | + | {| class="wikitable sortable" |
+ | |- | ||
+ | ! Quantity !! Part Source !! Note | ||
+ | |- | ||
+ | | 1 || [https://github.com/machineagency/jubilee/blob/master/tools/jubilee_tools/tools/passive_pen_tool/fabrication_exports/stls/pen_tool_base_tool_plate.STL Pen Tool Base Tool Plate] || print with support material | ||
+ | |- | ||
+ | | 1 || [https://github.com/machineagency/jubilee/blob/master/tools/jubilee_tools/tools/passive_pen_tool/fabrication_exports/stls/left_parking_wing.STL Left Parking Wing] || | ||
+ | |- | ||
+ | | 1 || [https://github.com/machineagency/jubilee/blob/master/tools/jubilee_tools/tools/passive_pen_tool/fabrication_exports/stls/right_parking_wing.STL Right Parking Wing] || | ||
+ | |- | ||
+ | | 1 || [https://github.com/machineagency/jubilee/blob/master/tools/jubilee_tools/tools/passive_pen_tool/fabrication_exports/stls/pen_holder.STL Pen Holder] || | ||
+ | |} | ||
====Parking Post==== | ====Parking Post==== | ||
− | + | {| class="wikitable sortable" | |
− | + | |- | |
+ | ! Quantity !! Part Source !! Note | ||
+ | |- | ||
+ | | 1 || [https://github.com/machineagency/jubilee/blob/master/tools/jubilee_tools/tool_posts/configurable_tool_post/fabrication_exports/parking_post_base_47mm.STL Parking Post Base 47mm] || | ||
+ | |- | ||
+ | | 1 || [https://github.com/machineagency/jubilee/blob/master/tools/jubilee_tools/tool_posts/configurable_tool_post/fabrication_exports/tool_holder_47mm.STL Tool Holder 47mm] || | ||
+ | |} | ||
== Assembly Instructions == | == Assembly Instructions == |
Revision as of 22:35, 1 August 2020
This is a pen tool for drawing with pens up to 13mm in diameter. It does not have any active components, which means the machine's Z axis can be adjusted to "lift" and "lower" the pen. This tool has a built in laser cut flexure, allowing you to increase the pen tip pressure by increasing the push distance slightly, for about 2mm total travel.
Parts to Buy
TODO: miscellaneous hardware from the CAD model.
Assembly Tools
TODO
Laser Cut Parts
TODO
3D Printed Parts and Settings
Common Settings
- PLA
- 0.4mm nozzle
- No supports
- 0.2mm layer height
- 6 perimters
- 20% infill (any pattern)
Parts and Special Settings
Pen Tool
Quantity | Part Source | Note |
---|---|---|
1 | Pen Tool Base Tool Plate | print with support material |
1 | Left Parking Wing | |
1 | Right Parking Wing | |
1 | Pen Holder |
Parking Post
Quantity | Part Source | Note |
---|---|---|
1 | Parking Post Base 47mm | |
1 | Tool Holder 47mm |
Assembly Instructions
TODO
Wiring
None!
Software Configuration
There are a host of software projects that can generate GCode (using Z for pen up-and-down), many of which are listed on [1]