Versions
Revision as of 22:27, 7 May 2020 by Poofjunior (talk | contribs) (Created page with "The Jubilee project evolves over time to collect community feedback and improvements. For the most part, that’s a good thing! To get a better sense of what’s changing, he...")
The Jubilee project evolves over time to collect community feedback and improvements. For the most part, that’s a good thing!
To get a better sense of what’s changing, here’s a breakdown of the project versioning number scheme.
X.0.0 to Y.0.0
- significant frame changes. You must buy new extrusions. (There are no plans for this right now.)
- greater than $300US (~20% of the frame cost)
0.X.0 to 0.Y.0
- significant subsystem change. example: new machined twist lock example: greater than $25US in new parts
- major bugfix
- “breaking” change.
- example: new firmware configs that are not compatible with old firmware
0.0.X to 0.0.Y
- minor change(s)
- tweaks to firmware config file
- Updates for stock part compatibility
- example: updating xy motion components to accept both Gates and Generic brand pulleys.
- less than $25US in new parts