Difference between revisions of "Peeling Prints"
Jump to navigation
Jump to search
Poofjunior (talk | contribs) (Created page with "Parts are peeling off the print bed as they are being printed. == What’s Happening? == As the printed material cools, it changes shape, shrinking slightly. Keeping the prin...") |
(No difference)
|
Latest revision as of 15:33, 6 January 2021
Parts are peeling off the print bed as they are being printed.
What’s Happening?
As the printed material cools, it changes shape, shrinking slightly. Keeping the printed part at a higher environment temperature reduces the effect of this shape change as it is being printed.
Fixing
Fixes are material specific.
PLA
Ambient printing temperature should be above 20C (68f). This can be accomplished with an enclosure or a spacer heater. The printer should also be operating away from any ambient breezes (heater, fan, HVAC system, doors to the outside.)