Difference between revisions of "Assembly Tools"
Jump to navigation
Jump to search
Poofjunior (talk | contribs) (Created page with "== Safety Equipment == Wear protective eyewear while working with hand tools, especially while soldering, cutting springs, and using the arbor press == Assembly Tools == Th...") |
Poofjunior (talk | contribs) |
||
| Line 1: | Line 1: | ||
== Safety Equipment == | == Safety Equipment == | ||
| − | Wear protective eyewear while working with hand tools, especially while soldering, cutting springs, and | + | Wear protective eyewear while working with hand tools, especially while soldering, cutting springs, and press-fitting components |
== Assembly Tools == | == Assembly Tools == | ||
Revision as of 18:44, 7 May 2020
Safety Equipment
Wear protective eyewear while working with hand tools, especially while soldering, cutting springs, and press-fitting components
Assembly Tools
The following tools/extra-materials are required for assembling Jubilee:
- Calipers, cheap or fancy. Both work.
- Budget Soldering Iron for installing heat-set inserts
- Heat-Set Insert Installation Tip. This one will work for M3 and M4 inserts.
- 1.3mm hex key
- 1.5mm hex key
- 2.0mm ball screw hex key
- 2.5mm hex key
- 3.0mm ball screw hex key
- M3 Hex Nut Driver. Filastruder or Amazon
- 0.5 Ton Benchtop Arbor Press is ideal but a bench vise will suffice.
- 2x 4 inch Quick-Grip Clamps for squaring the frame. These are sold in 2-packs, so one pack will suffice.
- 1 pair of 25-50-75 Blocks or 123 Blocks for squaring the frame
- 1 pair conventional wire cutters
- 1 pair hard wire cutters for cutting spring guide and wire rope. Note that cutting these parts with conventional wire cutters will destroy the wire cutters.
- blue medium-strength threadlock such as Vibra-Tite
- A flat surface to assemble the frame. A kitchen granite countertop is ideal, but a table will work too.
Maintenance/Calibration Tools
- Recommended: 1 USB Microscope for nozzle calibration