Difference between revisions of "Machined Parts"
Jump to navigation
Jump to search
Bytesurfer (talk | contribs) |
|||
| (19 intermediate revisions by 3 users not shown) | |||
| Line 3: | Line 3: | ||
There are currently 5 parts that are required to be machined/purchased in order to complete a Jubilee build: the [[Machined_Parts#The_Twist_Lock|twist lock]], the [[Machined_Parts#Bed_Plate|bed plate]], the [[Machined_Parts#Crossbar| crossbar]], the [[Machined_Parts#Motor_Plates|motor plates]] and the [[Machined_Parts#The_REL_Hub| REL Hub ]]. | There are currently 5 parts that are required to be machined/purchased in order to complete a Jubilee build: the [[Machined_Parts#The_Twist_Lock|twist lock]], the [[Machined_Parts#Bed_Plate|bed plate]], the [[Machined_Parts#Crossbar| crossbar]], the [[Machined_Parts#Motor_Plates|motor plates]] and the [[Machined_Parts#The_REL_Hub| REL Hub ]]. | ||
| − | + | Jubilee also offers machined variants to standard parts that can be purchased from third-party vendors or fabricated yourself. This page lists both the required machined parts for a standard Jubilee build, as well as the design files for the upgrade parts for more advanced builders. These are called out under the [[Machined_Parts#Machined_Upgrades|Machined Upgrades]] section of this page. | |
== The Twist Lock == | == The Twist Lock == | ||
| Line 10: | Line 10: | ||
=== Purchasing Options === | === Purchasing Options === | ||
| − | * | + | * Sonya Vasquez via [https://www.tindie.com/products/doublejumpelectric/jubilee-style-twist-lock-assembly/ Tindie] |
| − | * [https://www. | + | * [https://www.filastruder.com/collections/jubilee/products/twist-lock-assembly-for-jubilee Filastruder] |
| − | * [https://www. | + | * [https://lukeslabonline.com/products/jubilee-twist-lock Luke’s Laboratory] |
| + | * [https://www.seemecnc.com/products/jubilee-twist-lock-assembly SeeMeCNC] | ||
=== Machining Options=== | === Machining Options=== | ||
| − | * [https://github.com/machineagency/jubilee/blob/ | + | * [https://github.com/machineagency/jubilee/blob/main/frame/fabrication_exports/machined_parts/twist_lock twist lock shaft dimensioned drawing] |
| − | * A STEP file can be extracted from the [https://github.com/machineagency/jubilee/tree/ | + | * A STEP file can be extracted from the [https://github.com/machineagency/jubilee/tree/main/frame/cads/STEP current Jubilee snapshot] |
== Bed Plate == | == Bed Plate == | ||
The bed plate is made from 6.35mm thick MIC6 Aluminum, colloquially known as ''cast tool plate''. This tool plate arrives ''surfaced'', meaning that it is extremely flat to a high degree of specification. MIC6 Aluminum also thermally expands evenly when heated, which means the plate will not warp when heated with a silicone mat as is common for 3D printers. | The bed plate is made from 6.35mm thick MIC6 Aluminum, colloquially known as ''cast tool plate''. This tool plate arrives ''surfaced'', meaning that it is extremely flat to a high degree of specification. MIC6 Aluminum also thermally expands evenly when heated, which means the plate will not warp when heated with a silicone mat as is common for 3D printers. | ||
| − | If you machine the bed plate yourself, you can purchase a 14in. x 14in. x 1/4in. sheet of cast tool plate from [https://www.midweststeelsupply.com/store/castaluminumplateatp5 Midwest Steel Supply] or [https://www.onlinemetals.com/en/buy/aluminum/0-25-aluminum-plate-cast/pid/7808 OnlineMetals]. Please refer to the [https://github.com/machineagency/jubilee/blob/ | + | If you machine the bed plate yourself, you can purchase a 14in. x 14in. x 1/4in. sheet of cast tool plate from [https://www.midweststeelsupply.com/store/castaluminumplateatp5 Midwest Steel Supply] or [https://www.onlinemetals.com/en/buy/aluminum/0-25-aluminum-plate-cast/pid/7808 OnlineMetals]. Please refer to the [https://github.com/machineagency/jubilee/blob/main/frame/fabrication_exports/machined_parts/build_plate/z_plate.pdf dimensioned drawing] for hole features. |
=== Purchase Options === | === Purchase Options === | ||
| Line 28: | Line 29: | ||
* Aluminum Cast Tool Bed Plate '''with Magnets''' | * Aluminum Cast Tool Bed Plate '''with Magnets''' | ||
** [https://713maker.com/jubilee/jubilee-magnetic-heated-bed 713Maker] | ** [https://713maker.com/jubilee/jubilee-magnetic-heated-bed 713Maker] | ||
| − | ** [https://www.mandalaroseworks.com/jubilee | + | ** [https://www.mandalaroseworks.com/shop/mrw-products/jubilee-magbed Mandala Rose Works] |
** [https://www.seemecnc.com/collections/jubilee/products/jubilee-magnetic-aluminum-bed-plate SeeMeCNC] | ** [https://www.seemecnc.com/collections/jubilee/products/jubilee-magnetic-aluminum-bed-plate SeeMeCNC] | ||
* Aluminum Cast Tool Bed Plate '''without Magnets''' | * Aluminum Cast Tool Bed Plate '''without Magnets''' | ||
| Line 35: | Line 36: | ||
=== Machining Options=== | === Machining Options=== | ||
| − | * [https://github.com/machineagency/jubilee/tree/ | + | * [https://github.com/machineagency/jubilee/tree/main/frame/fabrication_exports/machined_parts/build_plate/z_plate.pdf build plate dimensioned drawing] |
| − | * [https://github.com/machineagency/jubilee/blob/ | + | * [https://github.com/machineagency/jubilee/blob/main/frame/fabrication_exports/machined_parts/build_plate/z_plate.STEP STEP file export] |
| − | * [https:// | + | * [https://www.aluminium-online-shop.de/produkt-kategorie/aluminium-platten-aluminium-bleche/feingefraeste-gussplatten/ EU (DE) based supplier of aluminum cast tooling plate to DIY a build plate] |
| + | * [https://onlinealuminium.nl/gegoten-plaat-en-ac-5083-toolingplate-elox-max-1500mm-x-600mm/ EU (NL - BE only) based supplier of aluminum cast tooling plate to DIY a build plate] | ||
| + | * [https://www.clickmetal.co.uk/click-by-category/tooling-plate/aluminium-tooling-plate UK based supplier of aluminIum cast tooling plate to DIY a build plate] | ||
== Crossbar == | == Crossbar == | ||
| Line 45: | Line 48: | ||
=== Purchasing options === | === Purchasing options === | ||
| − | * US Vendor: [https://www.mandalaroseworks.com/jubilee | + | * US Vendor: [https://www.mandalaroseworks.com/shop/mrw-products/jubilee-crossbar Mandala Rose Works] |
| − | * EU Stockist: [https://hightemp3d.com/collections/jubilee-and-toolchanger-stuff/products/jubilee-crossbar hightemp3d.com] | + | * EU Stockist: [https://hightemp3d.com/collections/jubilee-and-toolchanger-stuff/products/jubilee-crossbar hightemp3d.com] Note: High Temp 3D closed down shop around March 2023. |
| + | |||
=== Machining Options=== | === Machining Options=== | ||
| − | * [https://github.com/machineagency/jubilee/tree/ | + | * [https://github.com/machineagency/jubilee/tree/main/frame/fabrication_exports/machined_parts/crossbar/aluminum_crossbar aluminum crossbar dimensioned drawing] |
| − | * A STEP file can be extracted from the [https://github.com/machineagency/jubilee/tree/ | + | * A STEP file can be extracted from the [https://github.com/machineagency/jubilee/tree/main/frame/cads/STEP current Jubilee snapshot] |
=== Note: the Deprecated Carbon Fiber Crossbar === | === Note: the Deprecated Carbon Fiber Crossbar === | ||
| − | Light and stiff. This option was part of the original design, made by requesting a [https://github.com/machineagency/jubilee/tree/ | + | Light and stiff. This option was part of the original design, made by requesting a [https://github.com/machineagency/jubilee/tree/main/frame/fabrication_exports/machined_parts/crossbar custom DXF] from CNCMadness and installing four press-fit [https://www.mcmaster.com/93918a102 composite inserts]. Assembly Instructions remain on the [https://github.com/machineagency/jubilee/blob/rel/jubilee_2.0.1/frame/assembly_instructions/frame/crossbar_assembly.pdf GitHub wiki for V2.0.1]. |
* ~140 grams + 20 grams with inserts | * ~140 grams + 20 grams with inserts | ||
* Top Speed: 15000 - 20000 mm/min. | * Top Speed: 15000 - 20000 mm/min. | ||
| Line 63: | Line 67: | ||
* Aluminum stepper motor plates: | * Aluminum stepper motor plates: | ||
| − | ** [https://github.com/machineagency/jubilee/blob/ | + | ** [https://github.com/machineagency/jubilee/blob/main/frame/fabrication_exports/machined_parts/motor_plates Design and fabrication files] |
| − | ** US vendor: [https://www.mandalaroseworks.com/jubilee | + | ** US vendor: [https://www.mandalaroseworks.com/shop/mrw-products/jubilee-aluminum-stepper-mounts Mandala Rose Works] |
| − | ** EU stockist: [https://hightemp3d.com/collections/jubilee-and-toolchanger-stuff/products/mandala-rose-works-jubilee-aluminum-stepper-mounts hightemp3d.com] | + | ** EU stockist: [https://hightemp3d.com/collections/jubilee-and-toolchanger-stuff/products/mandala-rose-works-jubilee-aluminum-stepper-mounts hightemp3d.com] Note: High Temp 3D closed down shop around March 2023. |
* '''Optional Upgrade:''' Aluminum front corner brackets | * '''Optional Upgrade:''' Aluminum front corner brackets | ||
| − | ** [https://github.com/machineagency/jubilee/tree/ | + | ** [https://github.com/machineagency/jubilee/tree/main/frame/upgrades/aluminum_corner_plates Design and fabrication files] |
| − | ** US vendor: [https://www.mandalaroseworks.com/jubilee | + | ** US vendor: [https://www.mandalaroseworks.com/shop/mrw-products/jubilee-front-corner-brackets Mandala Rose Works] |
| − | ** EU stockist: [https://hightemp3d.com/collections/jubilee-and-toolchanger-stuff/products/mandala-rose-works-jubilee-aluminum-front-corner-brackets hightemp3d.com] | + | ** EU stockist: [https://hightemp3d.com/collections/jubilee-and-toolchanger-stuff/products/mandala-rose-works-jubilee-aluminum-front-corner-brackets hightemp3d.com] Note: High Temp 3D closed down shop around March 2023. |
==The REL Hub== | ==The REL Hub== | ||
| Line 77: | Line 81: | ||
=== Machining Options=== | === Machining Options=== | ||
This part can be turned from 6061 aluminum and then drilled and tapped on a milling machine. | This part can be turned from 6061 aluminum and then drilled and tapped on a milling machine. | ||
| − | * [https://github.com/machineagency/jubilee/tree/ | + | * [https://github.com/machineagency/jubilee/tree/main/frame/fabrication_exports/machined_parts/rel_hub/drawings/rel_hub.pdf Dimensioned Drawing] |
===Purchasing Options=== | ===Purchasing Options=== | ||
* US Vendor: [https://www.filastruder.com/collections/jubilee/products/aluminum-hub-6mm-id Filastruder] | * US Vendor: [https://www.filastruder.com/collections/jubilee/products/aluminum-hub-6mm-id Filastruder] | ||
| − | * EU Vendor: [https://hightemp3d.com/collections/jubilee-and-toolchanger-stuff/products/aluminum-hub-6-mm-id HighTemp3D] | + | * EU Vendor: [https://hightemp3d.com/collections/jubilee-and-toolchanger-stuff/products/aluminum-hub-6-mm-id HighTemp3D] Note: High Temp 3D closed down shop around March 2023. |
==Optional: Panels== | ==Optional: Panels== | ||
| Line 98: | Line 102: | ||
===Purchasing Options=== | ===Purchasing Options=== | ||
====Back Panel==== | ====Back Panel==== | ||
| − | * US Vendor: [https://www.filastruder.com/collections/jubilee/products/jubilee- | + | * US Vendor: [https://www.filastruder.com/collections/jubilee/products/jubilee-panels?variant=32462160592967 Filastruder] made from HDPE |
====Side Panels==== | ====Side Panels==== | ||
| − | * | + | * US Vendor: [https://www.filastruder.com/collections/jubilee/products/jubilee-panels?variant=32462160592967 Filastruder] made from HDPE |
===Machining Options=== | ===Machining Options=== | ||
This version of the files have inside-corner "[http://blog.inventables.com/2014/06/learn-about-milling-inside-corner.html Dogbone Fillets]" such that they can be cut by a 3.175mm (1/8th in.) diameter endmill | This version of the files have inside-corner "[http://blog.inventables.com/2014/06/learn-about-milling-inside-corner.html Dogbone Fillets]" such that they can be cut by a 3.175mm (1/8th in.) diameter endmill | ||
| − | * [https://raw.githubusercontent.com/machineagency/jubilee/ | + | * [https://raw.githubusercontent.com/machineagency/jubilee/main/frame/fabrication_exports/machined_parts/panels/machined_back_panel/back_panel.DXF Back Panel DXF] |
| − | * [https://raw.githubusercontent.com/machineagency/jubilee/ | + | * [https://raw.githubusercontent.com/machineagency/jubilee/main/frame/fabrication_exports/machined_parts/panels/machined_side_panels/machined_ethernet_side_side_panel.DXF Ethernet Side Panel DXF] |
| − | * [https://raw.githubusercontent.com/machineagency/jubilee/ | + | * [https://raw.githubusercontent.com/machineagency/jubilee/main/frame/fabrication_exports/machined_parts/panels/machined_side_panels/machined_psu_side_side_panel.DXF PSU Side Side Panel DXF] |
Latest revision as of 21:15, 3 November 2024
Jubilee's design objectives require that we minimize custom non-3D-printed parts to ensure the best "fabricability" for any builder using basic tools. However, certain components of the platform do necessitate some cnc machined metal parts that are core to how Jubilee operates as a toolchanging platform.
There are currently 5 parts that are required to be machined/purchased in order to complete a Jubilee build: the twist lock, the bed plate, the crossbar, the motor plates and the REL Hub .
Jubilee also offers machined variants to standard parts that can be purchased from third-party vendors or fabricated yourself. This page lists both the required machined parts for a standard Jubilee build, as well as the design files for the upgrade parts for more advanced builders. These are called out under the Machined Upgrades section of this page.
The Twist Lock
The twist lock shaft was modified to be compatible with the specifications presented in the E3D ToolChanger. However, as it has slightly different features because the underlying system operates differently, it is a distinct part.
Purchasing Options
- Sonya Vasquez via Tindie
- Filastruder
- Luke’s Laboratory
- SeeMeCNC
Machining Options
- twist lock shaft dimensioned drawing
- A STEP file can be extracted from the current Jubilee snapshot
Bed Plate
The bed plate is made from 6.35mm thick MIC6 Aluminum, colloquially known as cast tool plate. This tool plate arrives surfaced, meaning that it is extremely flat to a high degree of specification. MIC6 Aluminum also thermally expands evenly when heated, which means the plate will not warp when heated with a silicone mat as is common for 3D printers.
If you machine the bed plate yourself, you can purchase a 14in. x 14in. x 1/4in. sheet of cast tool plate from Midwest Steel Supply or OnlineMetals. Please refer to the dimensioned drawing for hole features.
Purchase Options
The bed plate can also purchased from one of various vendors either with or without magnets. Magnetic surfaces enable the use of a magnetic spring steel build plate. Non-magnetic surfaces can be made printable with surfaces like glass. The purchase options are as follows.
- Aluminum Cast Tool Bed Plate with Magnets
- Aluminum Cast Tool Bed Plate without Magnets
Machining Options
- build plate dimensioned drawing
- STEP file export
- EU (DE) based supplier of aluminum cast tooling plate to DIY a build plate
- EU (NL - BE only) based supplier of aluminum cast tooling plate to DIY a build plate
- UK based supplier of aluminIum cast tooling plate to DIY a build plate
Crossbar
The crossbar carries the X-axis rail and the tool carriage. The current revision is a pocketed aluminum crossbar, enabling the machine to carry heavier tools and operate at higher temperatures without warping.
- ~160 grams
- Top Speed: 15000 - 20000 mm/min.
Purchasing options
- US Vendor: Mandala Rose Works
- EU Stockist: hightemp3d.com Note: High Temp 3D closed down shop around March 2023.
Machining Options
- aluminum crossbar dimensioned drawing
- A STEP file can be extracted from the current Jubilee snapshot
Note: the Deprecated Carbon Fiber Crossbar
Light and stiff. This option was part of the original design, made by requesting a custom DXF from CNCMadness and installing four press-fit composite inserts. Assembly Instructions remain on the GitHub wiki for V2.0.1.
- ~140 grams + 20 grams with inserts
- Top Speed: 15000 - 20000 mm/min.
Motor Plates
Metal motor plates serve as stiff connection points for the XY motors, which are put in tension by the belts. Unlike plastic plates, these will not warp over time due to excess motor heat, and they even offer light heat-sinking for the XY motors.
Motor Plates And Corner Plates
If you machine the motor plates and corner brackets yourself, you can purchase some .25" Aluminum plate from OnlineMetals.
- Aluminum stepper motor plates:
- Design and fabrication files
- US vendor: Mandala Rose Works
- EU stockist: hightemp3d.com Note: High Temp 3D closed down shop around March 2023.
- Optional Upgrade: Aluminum front corner brackets
- Design and fabrication files
- US vendor: Mandala Rose Works
- EU stockist: hightemp3d.com Note: High Temp 3D closed down shop around March 2023.
The REL Hub
This wheel hub provides a secure connection to the REL motor.
Machining Options
This part can be turned from 6061 aluminum and then drilled and tapped on a milling machine.
Purchasing Options
- US Vendor: Filastruder
- EU Vendor: HighTemp3D Note: High Temp 3D closed down shop around March 2023.
Optional: Panels
Note: these parts can also be laser cut from Acrylic.
Suggested materials: 3.0-3.2mm thick High Density Polyethylene (HDPE), Polycarbonate, or Aluminum.
Electronics Back Panel
This panel contains bolt hole patterns for zip ties and mounting holes for multiple Duet Configurations.
Side Panels
These panels are optional. They add negligible structural support to the frame but are useful for preventing drafts and quick temperature changes inside the machine. They are also useful for discouraging cats from napping inside an active machine.
Purchasing Options
Back Panel
- US Vendor: Filastruder made from HDPE
Side Panels
- US Vendor: Filastruder made from HDPE
Machining Options
This version of the files have inside-corner "Dogbone Fillets" such that they can be cut by a 3.175mm (1/8th in.) diameter endmill