Difference between revisions of "Camera Inspection Tool"

Latest revision as of 11:08, 28 December 2022

The camera inspection tool is a general purpose USB camera for mounting C-Mount lenses.

Specs

built around a Raspberry RP HQ Camera IMX4777 image sensor breakout board
USB 2.0 camera interface via an Arducam breakout board
modular construction
- accepts numerous C and CS-mount style lenses with a case size of up to 41mm diameter.
- LED light ring is parametric (built around a side-illuminated LED strip) and can be sized up or down

Parts to Buy

A parts to buy are in this spreadsheet.

Assembly Tools

1.27mm Hex Key
1.5mm Hex Key
Budget Soldering Iron for installing heat-set inserts
- Recommended: Heat-Set Insert Installation Tip. This one will work for M3 and M4 inserts.

3D Printed Parts and Settings

Print all parts in the default model orientations using the following settings. Note that some special settings exist for particular parts; they are noted in the table.

Common Settings

PLA
0.4mm nozzle
No supports
0.2mm layer height
6 perimeters ← this is esp important for parts with heat-set inserts
20% infill (any pattern)

Parts and Special Settings

XYZ ProbeTool

Qty	Part Source	Special Settings
1	Base
1	COB LED Mount
1	Lid
3	Tool Ball Cup

Parking Post

Qty	Part Source	Special Settings
1	Parking Post Base xxH x xxW
1	Tool Holder xxH x xxW

Assembly Instructions

Camera Tool Instructions
Parking Post Instructions

Software Configuration

Coming soon.

@@ Line 7: / Line 7: @@
 * USB 2.0 camera interface via an [https://www.arducam.com/product/arducam-uvc-camera-adapter-board-for-12mp-imx477-raspberry-pi-hq-camera/ Arducam] breakout board
 * modular construction
-** accepts numerous c-mount style lenses
+** accepts numerous C and CS-mount style lenses with a case size of up to 41mm diameter.
 ** LED light ring is parametric (built around a side-illuminated LED strip) and can be sized up or down
 ==Parts to Buy==
-Coming soon.
+A parts to buy are in this spreadsheet.
 ==Assembly Tools==
@@ Line 20: / Line 20: @@
 ==3D Printed Parts and Settings==
-Coming soon.
+Print all parts in the default model orientations using the following settings. Note that some special settings exist for particular parts; they are noted in the table.
+=== Common Settings ===
+* PLA
+* 0.4mm nozzle
+* No supports
+* 0.2mm layer height
+* 6 perimeters ← this is esp important for parts with heat-set inserts
+* 20% infill (any pattern)
+=== Parts and Special Settings ===
+==== XYZ ProbeTool ====
+{| class="wikitable sortable"
+|-
+! Qty !! Part Source !! Special Settings
+|-
+| 1 || [https://github.com/Poofjunior/jubilee_camera_tool/blob/main/fabrication_exports/base.STL Base] ||
+|-
+| 1 || [https://github.com/Poofjunior/jubilee_camera_tool/blob/main/fabrication_exports/cob_led_mount.STL COB LED Mount] ||
+|-
+| 1 || [https://github.com/Poofjunior/jubilee_camera_tool/blob/main/fabrication_exports/lid.STL Lid] ||
+|-
+| 3 || [https://github.com/Poofjunior/jubilee_camera_tool/blob/main/fabrication_exports/tool_ball_cup.STL Tool Ball Cup] ||
+|-
+|}
+==== Parking Post ====
+{| class="wikitable sortable"
+|-
+! Qty !! Part Source !! Special Settings
+|-
+| 1 || [https://github.com/machineagency/jubilee/blob/main/tools/jubilee_tools/tool_posts/configurable_tool_post/fabrication_exports/parking_post_base_2550.STL Parking Post Base xxH x xxW] ||
+|-
+| 1 || [https://github.com/machineagency/jubilee/blob/main/tools/jubilee_tools/tool_posts/configurable_tool_post/fabrication_exports/tool_holder_2550.STL Tool Holder xxH x xxW] ||
+|-
+|}
 ==Assembly Instructions==
-Coming soon.
+* [https://github.com/Poofjunior/jubilee_camera_tool/blob/main/assembly_instructions/inspection_camera_instructions.pdf Camera Tool Instructions]
+* Parking Post Instructions
 ==Software Configuration==
 Coming soon.