Difference between revisions of "3D Printed Parts"
Jump to navigation
Jump to search
Poofjunior (talk | contribs) |
Poofjunior (talk | contribs) |
||
Line 134: | Line 134: | ||
|- | |- | ||
| 1 || [https://github.com/machineagency/jubilee/blob/dev/jubilee_2.2.0/tools/assembly_fixtures/z_lift_pin_insertion_fixture.STL z_lift_pin_insertion_fixture.STL] || | | 1 || [https://github.com/machineagency/jubilee/blob/dev/jubilee_2.2.0/tools/assembly_fixtures/z_lift_pin_insertion_fixture.STL z_lift_pin_insertion_fixture.STL] || | ||
+ | |} | ||
+ | |||
+ | == Optional Parts == | ||
+ | These parts are for adjustable leveling feet, which are highly recommended. | ||
+ | {| class="wikitable sortable" | ||
+ | |- | ||
+ | ! Quantity !! Part Source !! Note | ||
+ | |- | ||
+ | | 1 || [https://github.com/machineagency/jubilee/blob/main/frame/upgrades/threaded_feet_printed/fabrication_exports/threaded_foot_base.STL threaded_foot_base.stl] || | ||
+ | |- | ||
+ | | 1 || [https://github.com/machineagency/jubilee/blob/main/frame/upgrades/threaded_feet_printed/fabrication_exports/threaded_foot_stud.STL threaded_foot_stud.stl] || Print '''inside perimeter first'''. This improves the thread interface. | ||
+ | |- | ||
+ | | 1 || [https://github.com/machineagency/jubilee/blob/main/frame/upgrades/threaded_feet_printed/fabrication_exports/jam_nut.STL jam_nut.stl] || | ||
|} | |} | ||
Revision as of 15:04, 24 December 2022
Default Print Settings
Print all parts with the following print settings:
- PLA
- 0.4mm nozzle
- No supports
- 0.2mm layer height
- 6 perimeter layers (This is especially critical for parts that have heat-set inserts)
- 20% infill * printable in the provided orientations
- outer perimeter layer first
- uncheck "Detect Thin Walls" if your Slicer has this settings.
- Otherwise, small gaps will not be filled.
However, exceptions do exist! Please check the breakdown below for exceptions.
Note that parts that peel off the bed with a small curl cannot be used. They must stick to the bed such that they remain flat.
Other materials, such as PETG, may also work. We welcome feedback on various materials if others find them successful.
Frame Printed Parts and Quantities
Toolchanger Parts and Quantities
Quantity | Part Source | Note | |
---|---|---|---|
1 | SGC-xx | spring_guide_capture.stl | |
1 | -- | twist_lock_spacer.STL | |
1 | CBP-xx | carriage_back_plate.STL | |
1 | CCP-xx | carriage_center_plate.STL | |
1 | CFP-xx | carriage_coupler_plate.STL | |
1 | CPL-xx | carriage_pulley.STL | |
1 | -- | fixed_half_pulley.STL | |
1 | -- | knob.STL | |
1 | -- | floating_half_pulley.STL | print with support material.
Do not print from a matte or composite material, which adds friction to the spring's sliding surface. |
1 | RLB-xx | lock_actuator_base_plate.STL or stepperonline_lock_actuator_base_plate.STL | |
1 | -- | lock_actuator_motor_clip.STL or stepperonline_lock_actuator_motor_clip.STL | |
1 | -- | spring_guide_anchor_block.STL | OPTIONAL |
Extruder-Specific Frame Parts
Quantity | Part Source | Note | |
---|---|---|---|
1 | ooze_wiper.STL | per tool | |
1 | tool_cable_management_bracket.STL | per tool | |
1 | parking_post_base_47mm.STL | per tool | |
1 | tool_holder_47mm.STL | per tool |
Assembly Fixtures Parts and Quantities
Quantity | Part Source | Note |
---|---|---|
1 | coupling_plate_pin_insertion_fixture.STL | |
1 | z_lift_pin_insertion_fixture.STL |
Optional Parts
These parts are for adjustable leveling feet, which are highly recommended.
Quantity | Part Source | Note |
---|---|---|
1 | threaded_foot_base.stl | |
1 | threaded_foot_stud.stl | Print inside perimeter first. This improves the thread interface. |
1 | jam_nut.stl |
Deprecated Parts
These parts are no longer necessary in the latest version. They are:
Quantity | Part Source | Note |
---|---|---|
1 | front_left_leadscrew_retainer.STL | |
1 | front_right_leadscrew_retainer.STL | |
1 | back_leadscrew_retainer.STL | |
1 | left_motor_plate.STL | print from PETG
Note: an aluminum version of this part is now available. |
1 | right_motor_plate.STL | print from PETG
Note: an aluminum version of this part is now available. |
8 | outer_frame_squaring_plate.STL |