Difference between revisions of "Camera Inspection Tool"
Jump to navigation
Jump to search
Poofjunior (talk | contribs) (Created page with "The camera inspection tool is a general purpose USB camera for mounting C-Mount lenses. 400px|thumb|right ==Specs== * built aroun...") |
Poofjunior (talk | contribs) |
||
| Line 14: | Line 14: | ||
==Assembly Tools== | ==Assembly Tools== | ||
| − | + | * [https://www.mcmaster.com/5497A49/ 1.27mm Hex Key] | |
| + | * [https://www.mcmaster.com/5497A51/ 1.5mm Hex Key] | ||
| + | * [https://www.amazon.com/Weller-SP40NUS-40-Watt-Soldering-Iron/dp/B00B3SG6UQ Budget Soldering Iron] for installing heat-set inserts | ||
| + | ** Recommended: [https://www.mcmaster.com/92160a115 Heat-Set Insert Installation Tip]. This one will work for M3 and M4 inserts. | ||
==3D Printed Parts and Settings== | ==3D Printed Parts and Settings== | ||
Revision as of 14:34, 24 December 2022
The camera inspection tool is a general purpose USB camera for mounting C-Mount lenses.
Specs
- built around a Raspberry RP HQ Camera IMX4777 image sensor breakout board
- USB 2.0 camera interface via an Arducam breakout board
- modular construction
- accepts numerous c-mount style lenses
- LED light ring is parametric (built around a side-illuminated LED strip) and can be sized up or down
Parts to Buy
Coming soon.
Assembly Tools
- 1.27mm Hex Key
- 1.5mm Hex Key
- Budget Soldering Iron for installing heat-set inserts
- Recommended: Heat-Set Insert Installation Tip. This one will work for M3 and M4 inserts.
3D Printed Parts and Settings
Coming soon.
Assembly Instructions
Coming soon.
Software Configuration
Coming soon.