Difference between revisions of "Camera Inspection Tool"
Jump to navigation
Jump to search
Poofjunior (talk | contribs) |
Poofjunior (talk | contribs) (→Specs) |
||
| Line 7: | Line 7: | ||
* USB 2.0 camera interface via an [https://www.arducam.com/product/arducam-uvc-camera-adapter-board-for-12mp-imx477-raspberry-pi-hq-camera/ Arducam] breakout board | * USB 2.0 camera interface via an [https://www.arducam.com/product/arducam-uvc-camera-adapter-board-for-12mp-imx477-raspberry-pi-hq-camera/ Arducam] breakout board | ||
* modular construction | * modular construction | ||
| − | ** accepts numerous | + | ** accepts numerous C and CS-mount style lenses with a case size of up to 41mm diameter. |
** LED light ring is parametric (built around a side-illuminated LED strip) and can be sized up or down | ** LED light ring is parametric (built around a side-illuminated LED strip) and can be sized up or down | ||
Revision as of 10:57, 28 December 2022
The camera inspection tool is a general purpose USB camera for mounting C-Mount lenses.
Specs
- built around a Raspberry RP HQ Camera IMX4777 image sensor breakout board
- USB 2.0 camera interface via an Arducam breakout board
- modular construction
- accepts numerous C and CS-mount style lenses with a case size of up to 41mm diameter.
- LED light ring is parametric (built around a side-illuminated LED strip) and can be sized up or down
Parts to Buy
A parts to buy are in this spreadsheet.
Assembly Tools
- 1.27mm Hex Key
- 1.5mm Hex Key
- Budget Soldering Iron for installing heat-set inserts
- Recommended: Heat-Set Insert Installation Tip. This one will work for M3 and M4 inserts.
3D Printed Parts and Settings
Coming soon.
Assembly Instructions
Coming soon.
Software Configuration
Coming soon.