Crimping Wires

From Jubilee
Revision as of 21:33, 11 May 2020 by Cindygfeng (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

The following images show how to crimp connectors that are used when wiring Jubilee. The list is non-exhaustive, and will be continued to be updated.

Ring Terminal

  • Ring-1.jpg
  • Ring-2.jpg
  • Ring-3.jpg
  • Ring-4.jpg

Spade Terminal

  • Spade-1.jpg
  • Spade-2.jpg
  • Spade-3.jpg
  • Spade-4.jpg
  • Spade-5.jpg
  • Spade-6.jpg

Molex Connectors

These are the Molex pins and shells that came with the Duet board. Video: How to crimp Molex Connectors

  • Molex-1.jpg
  • Molex-2.jpg
  • Molex-3.jpg
  • Molex-4.jpg
  • Molex-5.jpg
  • Molex-6.jpg
  • Molex-7.jpg
Retrieved from "https://jubilee3d.com/index.php?title=Crimping_Wires&oldid=283"