Adjustable Leveling Feet
Revision as of 15:53, 24 December 2022 by Poofjunior (talk | contribs) (Created page with "These adjustable leveling feet are a drop-in replacement for the stock feet. Placing the machine on a flat surface is critical for minimizing frame warp and guaranteeing a goo...")
These adjustable leveling feet are a drop-in replacement for the stock feet. Placing the machine on a flat surface is critical for minimizing frame warp and guaranteeing a good first layer. For all other surfaces, leveling feet make up the difference, ensuring that the machine frame is not warped. Adjusting these feet can be the difference between a poor and excellent first-layer on a 3D print.
Note: since these parts take a long time to print, they are listed as an upgrade.
Parts to Buy
Besides the printed pieces, you will need a 1.5[in.] adhesive rubber pad to prevent the machine from drifting off your table! Here are two options below:
Specs
- drop-in replacement for existing feet