Difference between revisions of "3D Printed Parts"
Jump to navigation
Jump to search
Poofjunior (talk | contribs) |
Smoonerlater (talk | contribs) |
||
| Line 17: | Line 17: | ||
== Frame Printed Parts and Quantities == | == Frame Printed Parts and Quantities == | ||
| − | + | {| class="wikitable sortable" | |
| − | + | |- | |
| − | + | ! Quantity !! Part !! Note | |
| − | + | |- | |
| − | + | | 1 || [https://github.com/machineagency/jubilee/blob/master/frame/fabrication_exports/3d_printed_parts/frame/psu_socket_holder.STL PSU Socket Holder] || | |
| − | + | |- | |
| − | + | | 1 || [https://github.com/machineagency/jubilee/blob/master/frame/fabrication_exports/3d_printed_parts/frame/left_crossbar_pulley_reinforcement_plate.STL Left Crossbar Pulley Reinforcement Plate] || | |
| − | + | |- | |
| − | + | | 1 || [https://github.com/machineagency/jubilee/blob/master/frame/fabrication_exports/3d_printed_parts/frame/right_crossbar_pulley_reinforcement_plate.STL Right Crossbar Pulley Reinforcement Plate] || | |
| − | + | |- | |
| − | + | | 1 || [https://github.com/machineagency/jubilee/blob/master/frame/fabrication_exports/3d_printed_parts/frame/left_corner_pulley_reinforcement_plate.STL Left Corner Pulley Reinforcement Plate] || | |
| − | + | |- | |
| − | + | | 1 || [https://github.com/machineagency/jubilee/blob/master/frame/fabrication_exports/3d_printed_parts/frame/right_corner_pulley_reinforcement_plate.STL Right Corner Pulley Reinforcement Plate] || | |
| − | + | |- | |
| − | + | | 2 || [https://github.com/machineagency/jubilee/blob/master/frame/fabrication_exports/3d_printed_parts/frame/motor_reinforcement_plate.STL Motor Reinforcement Plate] || | |
| − | + | |- | |
| − | + | | 1 || [https://github.com/machineagency/jubilee/blob/master/frame/fabrication_exports/3d_printed_parts/frame/x_limit_trigger.STL x_limit_trigger.STL] || | |
| − | + | |- | |
| − | + | | 3 || [https://github.com/machineagency/jubilee/blob/master/frame/fabrication_exports/3d_printed_parts/frame/z_thrust_bearing_spacer.STL z_thrust_bearing_spacer.STL] || | |
| − | + | |- | |
| − | + | | 1 || [https://github.com/machineagency/jubilee/blob/master/frame/fabrication_exports/3d_printed_parts/frame/back_z_motor_plate.STL back_z_motor_plate.STL] || | |
| − | + | |- | |
| − | + | | 1 || [https://github.com/machineagency/jubilee/blob/master/frame/fabrication_exports/3d_printed_parts/frame/front_left_z_motor_plate.STL front_left_z_motor_plate.STL] || | |
| − | + | |- | |
| − | + | | 1 || [https://github.com/machineagency/jubilee/blob/master/frame/fabrication_exports/3d_printed_parts/frame/front_right_z_motor_plate.STL front_right_z_motor_plate.STL] || | |
| − | + | |- | |
| − | + | | 2 || [https://github.com/machineagency/jubilee/blob/master/frame/fabrication_exports/3d_printed_parts/frame/belt_clasp.STL belt_clasp.STL] || | |
| − | + | |- | |
| − | + | | 1 || [https://github.com/machineagency/jubilee/blob/master/frame/fabrication_exports/3d_printed_parts/frame/front_left_leadscrew_retainer.STL front_left_leadscrew_retainer.STL] || | |
| − | + | |- | |
| − | + | | 1 || [https://github.com/machineagency/jubilee/blob/master/frame/fabrication_exports/3d_printed_parts/frame/front_right_leadscrew_retainer.STL front_right_leadscrew_retainer.STL] || | |
| − | + | |- | |
| − | + | | 1 || [https://github.com/machineagency/jubilee/blob/master/frame/fabrication_exports/3d_printed_parts/frame/back_leadscrew_retainer.STL back_leadscrew_retainer.STL] || | |
| − | + | |- | |
| + | | 1 || [https://github.com/machineagency/jubilee/blob/master/frame/fabrication_exports/3d_printed_parts/frame/back_right_foot.STL back_right_foot.STL] || 2 perimeter layers is sufficient | ||
| + | |- | ||
| + | | 1 || [https://github.com/machineagency/jubilee/blob/master/frame/fabrication_exports/3d_printed_parts/frame/back_left_foot.STL back_left_foot.STL] || 2 perimeter layers is sufficient | ||
| + | |- | ||
| + | | 1 || [https://github.com/machineagency/jubilee/blob/master/frame/fabrication_exports/3d_printed_parts/frame/front_right_foot.STL front_right_foot.STL] || 2 perimeter layers is sufficient | ||
| + | |- | ||
| + | | 1 || [https://github.com/machineagency/jubilee/blob/master/frame/fabrication_exports/3d_printed_parts/frame/front_left_foot.STL front_left_foot.STL] || 2 perimeter layers is sufficient | ||
| + | |- | ||
| + | | 1 || [https://github.com/machineagency/jubilee/blob/master/frame/fabrication_exports/3d_printed_parts/frame/front_left_bed_coupling_lift.STL front_left_bed_coupling_lift.STL] || | ||
| + | |- | ||
| + | | 1 || [https://github.com/machineagency/jubilee/blob/master/frame/fabrication_exports/3d_printed_parts/frame/front_right_bed_coupling_lift.STL front_right_bed_coupling_lift.STL] || | ||
| + | |- | ||
| + | | 1 || [https://github.com/machineagency/jubilee/blob/master/frame/fabrication_exports/3d_printed_parts/frame/back_bed_coupling_lift.STL back_bed_coupling_lift.STL] || | ||
| + | |- | ||
| + | | 1 || [https://github.com/machineagency/jubilee/blob/master/frame/fabrication_exports/3d_printed_parts/frame/left_motor_corner_bracket_spacer.STL left_motor_corner_plate_spacer.STL] || | ||
| + | |- | ||
| + | | 1 || [https://github.com/machineagency/jubilee/blob/master/frame/fabrication_exports/3d_printed_parts/frame/right_motor_corner_bracket_spacer.STL right_motor_corner_plate_spacer.STL] || | ||
| + | |- | ||
| + | | 1 || [https://github.com/machineagency/jubilee/blob/master/frame/fabrication_exports/3d_printed_parts/frame/left_double_pulley_corner_bracket.STL left_double_pulley_corner_bracket.STL] || print with support material | ||
| + | |- | ||
| + | | 1 || [https://github.com/machineagency/jubilee/blob/master/frame/fabrication_exports/3d_printed_parts/frame/right_double_pulley_corner_bracket.STL right_double_pulley_corner_bracket.STL] || print with support material | ||
| + | |- | ||
| + | | 4 || [https://github.com/machineagency/jubilee/blob/master/frame/fabrication_exports/3d_printed_parts/frame/printed_pulley_spacer.STL printed_pulley_spacer.STL] || | ||
| + | |} | ||
== Toolchanger Parts and Quantities == | == Toolchanger Parts and Quantities == | ||
Revision as of 15:33, 6 June 2020
Default Print Settings
Print all parts with the following print settings:
- PLA
- 0.4mm nozzle
- No supports
- 0.2mm layer height
- 6 perimeter layers (This is especially critical for parts that have heat-set inserts)
- 20% infill * printable in the provided orientations
- outer perimeter layer first
- 2-3mm brim recommended, but not required
However, exceptions do exist! Please check the breakdown below for exceptions.
Note that parts that peel off the bed with a small curl cannot be used. They must stick to the bed such that they remain flat.
Other materials, such as PETG, may also work. We welcome feedback on various materials if others find them successful.
Frame Printed Parts and Quantities
Toolchanger Parts and Quantities
- 1x spring_guide_capture.stl
- 1x twist_lock_spacer.STL
- 1x carriage_back_plate.STL
- 1x carriage_center_plate.STL
- 1x carriage_coupler_plate.STL
- 1x carriage_pulley.STL
- 1x fixed_half_pulley.STL
- 1x knob.STL
- 1x floating_half_pulley.STL
- print with support material
- 1x lock_actuator_base_plate.STL or stepperonline_lock_actuator_base_plate.STL
- 1x lock_actuator_motor_clip.STL or stepperonline_lock_actuator_motor_clip.STL
- 1x OPTTIONAL spring_guide_anchor_block.STL
Extruder-Specific Frame Parts
- 1x ooze_wiper.STL per tool
- 1x tool_cable_management_bracket.STL per tool
- 1x parking_post_base_47mm.STL per tool
- 1x tool_holder_47mm.STL per tool
Assembly Fixtures Parts and Quantities
- 1x coupling_plate_pin_insertion_fixture.STL
- 1x z_lift_pin_insertion_fixture.STL
- 8x outer_frame_squaring_plate.STL
Deprecated Parts
These parts are no longer necessary in the latest version. They are:
- 1x left_motor_plate.STL
- print from PETG
- Note: an aluminum version of this part is now available.
- 1x right_motor_plate.STL
- print from PETG
- Note: an aluminum version of this part is now available.