File:Inconsistent Dual Extrusion Moai.jpg

Original file ‎(4,048 × 2,463 pixels, file size: 1.04 MB, MIME type: image/jpeg)

A Duel Extrusion Moai 3d printed where the tool printing the marble filament was not being picked up consistently by the carriage

File history

Click on a date/time to view the file as it appeared at that time.

	Date/Time	Thumbnail	Dimensions	User	Comment
current	23:22, 7 May 2020		4,048 × 2,463 (1.04 MB)	Poofjunior (talk \| contribs)

You cannot overwrite this file.

The following page uses this file:

This file contains additional information, probably added from the digital camera or scanner used to create or digitize it.

If the file has been modified from its original state, some details may not fully reflect the modified file.

Camera manufacturer	Google
Camera model	Pixel XL
Exposure time	1/60 sec (0.016666666666667)
F Number	f/2
ISO speed rating	190
Date and time of data generation	11:31, 23 February 2020
Lens focal length	4.67 mm
Orientation	Normal
Horizontal resolution	72 dpi
Vertical resolution	72 dpi
Software used	Windows Photo Editor 10.0.10011.16384
File change date and time	11:35, 23 February 2020
Y and C positioning	Centered
Exposure Program	Not defined
Exif version	2.2
Date and time of digitizing	11:31, 23 February 2020
Meaning of each component	Y Cb Cr does not exist
APEX shutter speed	5.906
APEX aperture	2
APEX brightness	0
Metering mode	Unknown
Flash	Flash did not fire, compulsory flash suppression
DateTime subseconds	406,171
DateTimeOriginal subseconds	406,171
DateTimeDigitized subseconds	406,171
Supported Flashpix version	0,100
Color space	sRGB
Sensing method	0
Scene type	0
Exposure mode	Auto exposure
White balance	Auto white balance
Focal length in 35 mm film	0 mm
Scene capture type	Standard
Altitude reference	0