Difference between revisions of "Nozzle Cleaning"
Jump to navigation
Jump to search
| Line 3: | Line 3: | ||
== Nozzle Wiper == | == Nozzle Wiper == | ||
There is currently a [https://github.com/machineagency/jubilee/blob/master/tools/jubilee_tools/tools/extruders/direct_drive_bondtech_groovemount_extruder/fabrication_exports/ooze_wiper.STL|ready-made model for a nozzle wiper] hosted on the main Jubilee GitHub repository that is designed to work with 3mm thick silicone strips. | There is currently a [https://github.com/machineagency/jubilee/blob/master/tools/jubilee_tools/tools/extruders/direct_drive_bondtech_groovemount_extruder/fabrication_exports/ooze_wiper.STL|ready-made model for a nozzle wiper] hosted on the main Jubilee GitHub repository that is designed to work with 3mm thick silicone strips. | ||
| + | |||
| + | == Nozzle Brush == | ||
Revision as of 19:02, 12 May 2020
This page should illustrate various approaches to wiping and cleaning FFM tool nozzles on tool changes to allow for successful and clean prints.
Nozzle Wiper
There is currently a model for a nozzle wiper hosted on the main Jubilee GitHub repository that is designed to work with 3mm thick silicone strips.