Difference between revisions of "Specifying Your Build Options"

From Jubilee
Jump to navigation Jump to search
(master branch renamed to main)
 
(22 intermediate revisions by 5 users not shown)
Line 1: Line 1:
The [https://docs.google.com/spreadsheets/d/1pRzBQxVzL9c4T9b1RrKvSjlSwJJhJ7NcbSV6iJUv0X0/edit#gid=0 V2 Shopping List] assumes configuring Jubilee for 3D printing with two tool heads, but some alternate parts might be better for different use cases. All options are listed below, and options labeled as '''default''' are present in this shopping list.
+
All parts for the latest stable Jubilee build are called out in the [https://docs.google.com/spreadsheets/d/1pRzBQxVzL9c4T9b1RrKvSjlSwJJhJ7NcbSV6iJUv0X0/edit#gid=0 V2 Shopping List]. If you are strictly following that list, you may safely ignore this page. If you (1) must perform part substitutes, (2) are looking for cheaper part alternatives, or (3) are looking for upgrades, read on!
 +
 
 +
==The Shopping List==
 +
The shopping list consists of 4 tabs for (1) primary frame components, (2) fasteners, (3) a set of two extruders, and (4) a set of optional upgrades.
 +
 
 +
===Regions and Part Alternates===
 +
While the shopping list favors a "self-sourcer" ordering parts from the United States, several alternates are listed from other international vendors. These alternates are ''functionally equivalent''. That is, substituting parts for these alternates will not impact the design's behavior, safety, or instructions.
 +
 
 +
===BOM vs Shopping List===
 +
The shopping list is not quite a proper bill-of-materials (BOM). While a bill-of-materials will display all the machine's constituent parts, the shopping list breaks down all parts into their smallest "units of sale." In other words, some line items may include _packs_ of screws when the machine may only use a few of them. This choice is done to favor the "self-sourcer" buying parts for the lowest possible price without relying on volume discounts. In all cases where this occurs, the part quantity _actually_ used in the machine is mentioned in the comments.
  
 
== Frame Configuration ==
 
== Frame Configuration ==
 +
 +
===Pulley/Idler/Belt Options===
 +
* '''Default:''' Gates brand 2GT drive pulleys, idlers, and timing belt.
 +
* '''Budget:''' [https://www.aliexpress.com/item/1005001516376637.html Powge brand 2GT drive pulleys, idlers, and timing belt.]
 +
** Save $50US. These pulleys are 9mm instead to 10mm tall, which means they will require 5 extra 0.2mm shim in between belt layers.
 +
** After more thorough testing, these may become the default in future versions.
 +
 +
===2020 Aluminum Extrusions===
 +
*'''Note:''' These may or may not be anodized.
 +
*'''Note:''' Because the frame extrusions are used as references for alignment later, these are specified to be cut by Misumi, a vendor with the proper tooling to hold length tolerances within 0.4mm (often within 0.1mm).
 +
 +
===Leadscrew Options===
 +
* '''Default:''' T8x2 Leadscrews, 375mm long
 +
* '''Option:''' T8x4 Leadscrews, 375mm long. These can effectively double the Z movement speed. (Useful for non-printing applications where the bed experiences lots of height changes.) These are currently only stocked at [https://www.filastruder.com/collections/jubilee/products/ldo-leadscrews Filastruder]. When run with 0.9mm stepper motors, they do not accumulate error in the case where the Z axis moves in full-step increments. (For more on error accumulation with particular leadscrew/motor configurations, see the [https://blog.prusaprinters.org/calculator_3416/ Prusa leadscrew calculator]).
 +
 +
===L Bracket Options===
 +
*'''Note:''' The default L brackets are bundled with M3, 4mm flat-tip set screws. Because the frame is intended to be electrically connected together through these connectors, the shopping list specifies an extra set of cup point set screws that will cut through the anodization layer when tightened. If you are replacing the L brackets with alternates, make sure you also use them with either _cup_ point or _cone_ point set screws. Flat set screws are not guaranteed to connect the frame together.
  
 
=== Electronics Options ===
 
=== Electronics Options ===
  
 
* '''Default:''' Duet2 + Duex5
 
* '''Default:''' Duet2 + Duex5
* Duet3 + Raspi + 2 Duet Expander Boards
+
* Duet3 + Raspberry Pi + 2 Duet Expander Boards
 
** this is not yet officially supported with a config file, but the back panel has a hole pattern to accomodate these boards.
 
** this is not yet officially supported with a config file, but the back panel has a hole pattern to accomodate these boards.
  
 
=== Bed Options ===
 
=== Bed Options ===
 +
* '''Default:''' [https://713maker.com/jubilee/jubilee-heated-bed Plain MIC6 Aluminum Plate] + [https://subtle.design/ 305x305 High Temperature Magnetic Sheet]
 +
* '''Upgrade:''' Aluminum Cast Tool Plate Plate with embedded magnets by [https://713maker.com/jubilee/jubilee-magnetic-heated-bed 713Maker] or [https://www.mandalaroseworks.com/jubilee/magbed Mandala Rose Works]
 +
** This bed plate heats up in a speedy 1-2 minutes and should be fine operating at temperatures no more than 150C.
  
* '''Default:''' MIC6 Aluminum Plate with embedded magnets
+
=== 305x305mm Magnetic Build Plate Options ===
** This bed plate should be fine operating at temperatures between 120 and 150C. Check your vendor for this limit.
+
* '''Budget:''' [https://www.seemecnc.com/products/fablam-flex-spring-steel-bed-plate-for-jubilee?_pos=11&_sid=e2a6a3d11&_ss=r Fablam Flexplate] by SeeMeCNC
* MIC6 Aluminum Plate BYOM (Bring your own magnets) Style
+
** Save $30US. These may become the default in a future revision.
** This plate has pockets for magnets, but you will need to supply your own magnets
+
* '''Default:''' [https://www.buildtak.com/product/flexplate-surface/ BuildTak Flexplate]
* Plain MIC6 Aluminum Plate
 
** this is especially handy for non-printing applications.
 
  
 
=== Crossbar Options ===
 
=== Crossbar Options ===
  
* '''Deprecated:''' 6mm Carbon Fiber Crossbar
 
** Light and stiff. This option was part of the original design, made by requesting a [https://github.com/machineagency/jubilee/tree/master/frame/fabrication_exports/machined_parts/crossbar custom DXF] from CNCMadness and installing four press-fit [https://www.mcmaster.com/93918a102 composite inserts]. Assembly Instructions remain on the wiki.
 
** ~140 grams + 20 grams with inserts
 
** Top Speed: 15000 - 20000 mm/min.
 
 
* '''Default:''' Aluminum Crossbar
 
* '''Default:''' Aluminum Crossbar
 
** a pocketed aluminum crossbar, enabling the machine to carry heavier tools and operate at higher temperatures without warping. It is also substantially easier to assemble than the carbon fiber crossbar.
 
** a pocketed aluminum crossbar, enabling the machine to carry heavier tools and operate at higher temperatures without warping. It is also substantially easier to assemble than the carbon fiber crossbar.
Line 30: Line 53:
 
** US Vendor: [https://www.mandalaroseworks.com/jubilee/crossbar Mandala Rose Works]
 
** US Vendor: [https://www.mandalaroseworks.com/jubilee/crossbar Mandala Rose Works]
 
** EU Stockist: [https://hightemp3d.com/collections/jubilee-and-toolchanger-stuff/products/jubilee-crossbar hightemp3d]
 
** EU Stockist: [https://hightemp3d.com/collections/jubilee-and-toolchanger-stuff/products/jubilee-crossbar hightemp3d]
 +
* '''Deprecated:''' 6mm Carbon Fiber Crossbar
 +
** Light and stiff. This option was part of the original design, made by requesting a [https://github.com/machineagency/jubilee/tree/main/frame/fabrication_exports/machined_parts/crossbar custom DXF] from CNCMadness and installing four press-fit [https://www.mcmaster.com/93918a102 composite inserts]. Assembly Instructions remain on the wiki.
 +
** ~140 grams + 20 grams with inserts
 +
** Top Speed: 15000 - 20000 mm/min.
  
 
=== XY Motor Options ===
 
=== XY Motor Options ===
  
* '''Default:''' [https://www.omc-stepperonline.com/nema-17-stepper-motor/nema-17-bipolar-0-9deg-46ncm-65-1oz-in-2a-2-8v-42x42x48mm-4-wires-full-d-cut-shaft.html Stepper Online Motors]
+
* '''Budget:''' [https://www.omc-stepperonline.com/nema-17-stepper-motor/nema-17-bipolar-0-9deg-46ncm-65-1oz-in-2a-2-8v-42x42x48mm-4-wires-full-d-cut-shaft.html Stepper Online Motors]
 
** Part Number: 17HM19-2004S1 [https://www.omc-stepperonline.com/download/17HM19-2004S1.pdf Spec Sheet]
 
** Part Number: 17HM19-2004S1 [https://www.omc-stepperonline.com/download/17HM19-2004S1.pdf Spec Sheet]
* '''Upgrade:''' LDO 0.9 Nema 17 MAX Power Motors sold by [https://www.filastruder.com/products/ldo-stepper-motors-all-types?variant=31998729158727 Filastruder]
+
* '''Default:''' LDO 0.9 Nema 17 MAX Power Motors sold by [https://www.filastruder.com/products/ldo-stepper-motors-all-types?variant=31998729158727 Filastruder]
 
** Part Number: LDO-42STH60-2004MAC(RC) [[files/LDO-42STH60-2004MAC(RC)%20RevB.PDF|Spec Sheet]]
 
** Part Number: LDO-42STH60-2004MAC(RC) [[files/LDO-42STH60-2004MAC(RC)%20RevB.PDF|Spec Sheet]]
  
Line 42: Line 69:
 
=== Extruder Options ===
 
=== Extruder Options ===
  
* The [https://github.com/machineagency/jubilee/tree/master/cads/tools/direct_drive_bondtech_groovemount_extruder Default Extruder] can accommodate an E3D V6 (default) or Volcano nozzle without adjusting the heights of other components.
+
* The [https://github.com/machineagency/jubilee/blob/main/tools/jubilee_tools/tools/extruders/direct_drive_bondtech_groovemount_extruder/ Default Extruder] can accommodate an E3D V6 (default) or Volcano nozzle without adjusting the heights of other components.
  
== Planned Upgrades ==
+
== Upgrades ==
  
 
* [https://www.mandalaroseworks.com/jubilee/frontCorners Metal Corner Plates] - Made by Mandala Rose Works (also sold by [https://hightemp3d.com/collections/jubilee-and-toolchanger-stuff/products/mandala-rose-works-jubilee-aluminum-front-corner-brackets hightemp3d] in the EU)
 
* [https://www.mandalaroseworks.com/jubilee/frontCorners Metal Corner Plates] - Made by Mandala Rose Works (also sold by [https://hightemp3d.com/collections/jubilee-and-toolchanger-stuff/products/mandala-rose-works-jubilee-aluminum-front-corner-brackets hightemp3d] in the EU)
* [https://www.mandalaroseworks.com/jubilee/stepperMounts Metal Stepper Plates] - Made by Mandala Rose Works (also sold by [https://hightemp3d.com/collections/jubilee-and-toolchanger-stuff/products/mandala-rose-works-jubilee-aluminum-stepper-mounts hightemp3d] in the EU)
+
 
** These stepper plates are stiffer and have the added benefit of acting like heatsinks for the XY motors.
+
== Planned Upgrades ==
 
* [Hemera Extruder Tool]
 
* [Hemera Extruder Tool]
 
* [9mm Belt Upgrade]
 
* [9mm Belt Upgrade]
 
* [E3D Tool Plate Style Bondtech Extruder] comparable to the default extruder
 
* [E3D Tool Plate Style Bondtech Extruder] comparable to the default extruder

Latest revision as of 13:01, 30 May 2021

All parts for the latest stable Jubilee build are called out in the V2 Shopping List. If you are strictly following that list, you may safely ignore this page. If you (1) must perform part substitutes, (2) are looking for cheaper part alternatives, or (3) are looking for upgrades, read on!

The Shopping List

The shopping list consists of 4 tabs for (1) primary frame components, (2) fasteners, (3) a set of two extruders, and (4) a set of optional upgrades.

Regions and Part Alternates

While the shopping list favors a "self-sourcer" ordering parts from the United States, several alternates are listed from other international vendors. These alternates are functionally equivalent. That is, substituting parts for these alternates will not impact the design's behavior, safety, or instructions.

BOM vs Shopping List

The shopping list is not quite a proper bill-of-materials (BOM). While a bill-of-materials will display all the machine's constituent parts, the shopping list breaks down all parts into their smallest "units of sale." In other words, some line items may include _packs_ of screws when the machine may only use a few of them. This choice is done to favor the "self-sourcer" buying parts for the lowest possible price without relying on volume discounts. In all cases where this occurs, the part quantity _actually_ used in the machine is mentioned in the comments.

Frame Configuration

Pulley/Idler/Belt Options

  • Default: Gates brand 2GT drive pulleys, idlers, and timing belt.
  • Budget: Powge brand 2GT drive pulleys, idlers, and timing belt.
    • Save $50US. These pulleys are 9mm instead to 10mm tall, which means they will require 5 extra 0.2mm shim in between belt layers.
    • After more thorough testing, these may become the default in future versions.

2020 Aluminum Extrusions

  • Note: These may or may not be anodized.
  • Note: Because the frame extrusions are used as references for alignment later, these are specified to be cut by Misumi, a vendor with the proper tooling to hold length tolerances within 0.4mm (often within 0.1mm).

Leadscrew Options

  • Default: T8x2 Leadscrews, 375mm long
  • Option: T8x4 Leadscrews, 375mm long. These can effectively double the Z movement speed. (Useful for non-printing applications where the bed experiences lots of height changes.) These are currently only stocked at Filastruder. When run with 0.9mm stepper motors, they do not accumulate error in the case where the Z axis moves in full-step increments. (For more on error accumulation with particular leadscrew/motor configurations, see the Prusa leadscrew calculator).

L Bracket Options

  • Note: The default L brackets are bundled with M3, 4mm flat-tip set screws. Because the frame is intended to be electrically connected together through these connectors, the shopping list specifies an extra set of cup point set screws that will cut through the anodization layer when tightened. If you are replacing the L brackets with alternates, make sure you also use them with either _cup_ point or _cone_ point set screws. Flat set screws are not guaranteed to connect the frame together.

Electronics Options

  • Default: Duet2 + Duex5
  • Duet3 + Raspberry Pi + 2 Duet Expander Boards
    • this is not yet officially supported with a config file, but the back panel has a hole pattern to accomodate these boards.

Bed Options

305x305mm Magnetic Build Plate Options

Crossbar Options

  • Default: Aluminum Crossbar
    • a pocketed aluminum crossbar, enabling the machine to carry heavier tools and operate at higher temperatures without warping. It is also substantially easier to assemble than the carbon fiber crossbar.
    • ~160 grams
    • Top Speed: 15000 - 20000 mm/min.
    • US Vendor: Mandala Rose Works
    • EU Stockist: hightemp3d
  • Deprecated: 6mm Carbon Fiber Crossbar
    • Light and stiff. This option was part of the original design, made by requesting a custom DXF from CNCMadness and installing four press-fit composite inserts. Assembly Instructions remain on the wiki.
    • ~140 grams + 20 grams with inserts
    • Top Speed: 15000 - 20000 mm/min.

XY Motor Options

Tools

Extruder Options

  • The Default Extruder can accommodate an E3D V6 (default) or Volcano nozzle without adjusting the heights of other components.

Upgrades

Planned Upgrades

  • [Hemera Extruder Tool]
  • [9mm Belt Upgrade]
  • [E3D Tool Plate Style Bondtech Extruder] comparable to the default extruder