Difference between revisions of "Community Mods"

From Jubilee
Jump to navigation Jump to search
 
(29 intermediate revisions by 10 users not shown)
Line 12: Line 12:
 
* [https://github.com/lukeslaboratory/HemeraMountJubilee Hemera-Mount-Jubilee] by lukeslaboratory
 
* [https://github.com/lukeslaboratory/HemeraMountJubilee Hemera-Mount-Jubilee] by lukeslaboratory
 
** “Simple Repo for the Hemera Mount that uses the e3d toolchanger plates”
 
** “Simple Repo for the Hemera Mount that uses the e3d toolchanger plates”
 +
* [https://www.thingiverse.com/thing:4902153 Jubilee Adapter for E3D's ToolChanger Hemera Tool] by dflemstr
 +
** Uses the off-the-shelf [https://e3d-online.com/products/toolchanger-tools ToolChanger tool] kit, including the ToolChanger dock. Makes space for a Duet 3 ToolBoard and docking switch, too.
 +
 +
=== E3D Titan Aqua Mount ===
 +
 +
* [https://github.com/EMRosa/Jubilee-Titan-Aqua-Tool-Mount Jubilee Titan Aqua Tool Mount] by EMRosa
 +
** Repo of parts for Titan Aqua
 +
* [https://jubilee3d.com/index.php?title=E3D_Titan_Aqua_Mount Instructions and other considerations ] by EMRosa
  
 
=== Extruder Ooze Control ===
 
=== Extruder Ooze Control ===
Line 19: Line 27:
 
* [https://github.com/HaythamB/Jubilee_9mm_MGN15_Conversion/tree/master/tools/ooze_blocker Ooze Blocker] by HaythamB
 
* [https://github.com/HaythamB/Jubilee_9mm_MGN15_Conversion/tree/master/tools/ooze_blocker Ooze Blocker] by HaythamB
 
** “Simple ooze blocker for parking nozzles over 3mm high temperature silicone pieces. Prevents nozzle ooze during parked position, and just makes life a little bit easier when doing multi-material prints.”
 
** “Simple ooze blocker for parking nozzles over 3mm high temperature silicone pieces. Prevents nozzle ooze during parked position, and just makes life a little bit easier when doing multi-material prints.”
 +
 +
=== Dragon Hotend Mount and 3 Side Cooling Shroud ===
 +
* [https://github.com/edspeds/Jubilee-Dragon-Hotend-Mount Dragon Hotend Mount] by edthesped
 +
** Mount with integrated heat sink cooling shroud for the Dragon Hot End.  To use the mount the groove mount adapter needs to be removed and attached with the supplied four 2.5mm screws.  The mount uses the same 3mm heatserts that are used for the V6 mount and is to be attached as shown in the original Jubilee instructions.  PTFE length for this is 47.73mm though I shortened mine by around .75mm to minimize separation between the tip of my nozzle and the end of Z limit switch.  Note, if you use the 3 sided cooling shroud the wiper assembly will need to be removed to allow for clearance of the cooling shroud, I'll be working on a solution for that in the future.  Also Tpfree and Tpost will need to be modified to keep the carriage from pushing the tool into the frame.
 +
 +
** See PDF for details
 +
 +
=== Voron Afterburner (E3D v6) ===
 +
* [https://github.com/VerminSup/Voron-Afterburner-Jubilee-tool Voron afterburner tool] by Vermin
 +
** Slim extruder desing using the Voron afterburner extruder
 +
 +
** See [https://github.com/VerminSup/Voron-Afterburner-Jubilee-tool/blob/main/Voron%20afterburner%20tool%20Assembly%20guide.pdf PDF] for assembly instructions
 +
 +
== Cable Management Bracket with PTFE compression fitting ==
 +
[https://github.com/edspeds/Jubilee-Cable-Management Cable Management Bracket] by edthesped
 +
* Remix of the Cable Management Bracket that is longer and adds a compression fitting for PTFE tube.  Threads print best if bracket is printed vertically.
  
 
== Frame Mods ==
 
== Frame Mods ==
Line 31: Line 55:
 
* [https://www.thingiverse.com/thing:4354750 Kinematic Bed Coupling for E3D Anti-Backlash Nut]
 
* [https://www.thingiverse.com/thing:4354750 Kinematic Bed Coupling for E3D Anti-Backlash Nut]
 
** Bed Couplers compatible with E3D's AntiBacklash Nuts
 
** Bed Couplers compatible with E3D's AntiBacklash Nuts
−
* [https://drive.google.com/file/d/1PiCkiVHudmkJdRJX5R94qxiKLM8naZPH/view?usp=sharing Side Panel Power Outlet Insert STL] by Tsunaminaut
+
* [https://drive.google.com/file/d/1DC-EHMiiumaaxCHCGauQ8pRXV_01HKbn/view?usp=sharing Side Panel Power Outlet Insert STL] by Tsunaminaut
−
** [https://drive.google.com/open?id=1YHEt1PhuJ_8zkXrOvcm55AWyVNe65WQLFusion] 360 File
+
** Parametric [https://a360.co/2TGliVY Fusion 360 Model]
 +
* [https://www.thingiverse.com/thing:4499736 AC Power Entry - DigiKey STL] by smoonerlater
 +
** [https://a360.co/3dvyPae Fusion 360 Model]
 +
* Tool Alignment [https://github.com/hakuro-jp/Jubliee Camera Swivel Mount] by hakuro. This swivel mount mounts an upward facing camera (usable for TAMV) on a swivel mount on the back of the machine. The result is that the camera need not take up any space on the tool rack and retracts away from the bed, so the usable printing volume is unchanged.
 +
* [https://github.com/vcapra1/jubilee/tree/master/parts Various Custom Parts]
 +
** Spool mounts, cable management, hotend fan mods, covers for power switch and SSR
 +
* [https://github.com/HaythamB/Jubilee_9mm_MGN15_Conversion/tree/master/tools/tool_dock_cable_management Tall post for tool cable management] by HaythamB
 +
** A taller post for tool dock cables that allow for a metal ziptie and grubscrew at the top. Printing standing up! :D
  
 
== Software Mods ==
 
== Software Mods ==
  
−
* [https://github.com/DanalEstes/installOpenCV Install OpenCV]
+
* [https://github.com/Xonman/installOpenCV Install OpenCV]
 
** Comprehensive installer for OpenCV on Raspbian (raspberry Pi). Does NOT install virtualized.
 
** Comprehensive installer for OpenCV on Raspbian (raspberry Pi). Does NOT install virtualized.
 
* [https://github.com/DanalEstes/DuetWebAPI Duet Web API]
 
* [https://github.com/DanalEstes/DuetWebAPI Duet Web API]
 
** Python interface to Duet RepRap V2 or V3 firmware.
 
** Python interface to Duet RepRap V2 or V3 firmware.
−
* [https://github.com/DanalEstes/TAMV TAMV]
+
* [https://github.com/HaythamB/TAMV TAMV]
 
** TAMV = Tool Align Machine Vision for Duet based tool changing 3D printers.
 
** TAMV = Tool Align Machine Vision for Duet based tool changing 3D printers.
−
** [https://github.com/machineagency/jubilee/wiki/Setting-Up-TAMV-on-a-Duet3 Setting up TAMV on a Duet3]
+
** [[TAMV|Setting up TAMV]]
 +
* [[PT100_-_PT1000_Setup|Setting up a PT1000 temperature sensor]] by Doug on the Discord server
 +
** A guide on how to get a PT1000 temperature sensor configured on a Duet board
 +
* [https://github.com/vcapra1/jubilee/tree/master/firmware/sys Firmware Config Script]
 +
** Helps when making small changes to things like tool offsets, motor limits, etc. to propagate the changes to all G-Code config files
 +
 
 +
== Z-offset KnobProbe / Doorknob-probe ==
 +
*Probe the Z offset between Z-probe and nozzle
 +
** [https://www.printables.com/model/120147 3D-models + duet configuration] by TypQxQ
 +
** [https://github.com/TypQxQ/KnobProbe_Klipper configuration for TypQxQ's version of jubilee-klipper] by TypQxQ
 +
** [https://github.com/Xonman/KlipperOffsetProbe configuration for ImpC's version of jubilee-klipper] by Xon

Latest revision as of 03:42, 4 July 2022

Assembly Tools

  • T-Bar Tool by edskull
    • “to aid in setting offset between Carriage Faceplate and Twist Lock.”

Tools

Hemera Extruder Mounts

E3D Titan Aqua Mount

Extruder Ooze Control

  • Long Ooze Wiper by HaythamB
    • “A longer version of the default ooze wiper designed to fit a Hemera mount. Has 4 to 5.6 mm of clearance to the front Z-axis bed mount on Jubilee V2.”
  • Ooze Blocker by HaythamB
    • “Simple ooze blocker for parking nozzles over 3mm high temperature silicone pieces. Prevents nozzle ooze during parked position, and just makes life a little bit easier when doing multi-material prints.”

Dragon Hotend Mount and 3 Side Cooling Shroud

  • Dragon Hotend Mount by edthesped
    • Mount with integrated heat sink cooling shroud for the Dragon Hot End. To use the mount the groove mount adapter needs to be removed and attached with the supplied four 2.5mm screws. The mount uses the same 3mm heatserts that are used for the V6 mount and is to be attached as shown in the original Jubilee instructions. PTFE length for this is 47.73mm though I shortened mine by around .75mm to minimize separation between the tip of my nozzle and the end of Z limit switch. Note, if you use the 3 sided cooling shroud the wiper assembly will need to be removed to allow for clearance of the cooling shroud, I'll be working on a solution for that in the future. Also Tpfree and Tpost will need to be modified to keep the carriage from pushing the tool into the frame.
    • See PDF for details

Voron Afterburner (E3D v6)

    • See PDF for assembly instructions

Cable Management Bracket with PTFE compression fitting

Cable Management Bracket by edthesped

  • Remix of the Cable Management Bracket that is longer and adds a compression fitting for PTFE tube. Threads print best if bracket is printed vertically.

Frame Mods

Software Mods

  • Install OpenCV
    • Comprehensive installer for OpenCV on Raspbian (raspberry Pi). Does NOT install virtualized.
  • Duet Web API
    • Python interface to Duet RepRap V2 or V3 firmware.
  • TAMV
    • TAMV = Tool Align Machine Vision for Duet based tool changing 3D printers.
    • Setting up TAMV
  • Setting up a PT1000 temperature sensor by Doug on the Discord server
    • A guide on how to get a PT1000 temperature sensor configured on a Duet board
  • Firmware Config Script
    • Helps when making small changes to things like tool offsets, motor limits, etc. to propagate the changes to all G-Code config files

Z-offset KnobProbe / Doorknob-probe

Retrieved from "https://jubilee3d.com/index.php?title=Community_Mods&oldid=4507"