Difference between revisions of "XYZ Probe Tool"
Jump to navigation
Jump to search
Poofjunior (talk | contribs) |
Poofjunior (talk | contribs) |
||
| Line 14: | Line 14: | ||
TODO | TODO | ||
| − | ==3D Printed Parts and Settings== | + | == 3D Printed Parts and Settings == |
| − | + | Print all parts in the default model orientations using the following settings. Note that some special settings exist for particular parts; they are noted in the table. | |
| + | |||
| + | === Common Settings === | ||
| + | * PLA | ||
| + | * 0.4mm nozzle | ||
| + | * No supports | ||
| + | * 0.2mm layer height | ||
| + | * 6 perimeters ← this is esp important for parts with heat-set inserts | ||
| + | * 20% infill (any pattern) | ||
| + | |||
| + | === Parts and Special Settings === | ||
==Assembly Instructions== | ==Assembly Instructions== | ||
Revision as of 10:42, 28 December 2022
The XYZ Probe Tool is a compact touch probe capable of inspecting objects installed into the machine or acting as supplementary way of homing the machine.
Specs
- kinematic coupling based design
- looks like a mechanical limit switch in software
- uses an off-the-shelf ruby-tipped cnc probe tip
Parts to Buy
TODO
Assembly Tools
TODO
3D Printed Parts and Settings
Print all parts in the default model orientations using the following settings. Note that some special settings exist for particular parts; they are noted in the table.
Common Settings
- PLA
- 0.4mm nozzle
- No supports
- 0.2mm layer height
- 6 perimeters ← this is esp important for parts with heat-set inserts
- 20% infill (any pattern)
Parts and Special Settings
Assembly Instructions
TODO
Software Configuration
TODO