Difference between revisions of "XYZ Probe Tool"
Jump to navigation
Jump to search
Poofjunior (talk | contribs) |
Poofjunior (talk | contribs) |
||
| Line 41: | Line 41: | ||
! Qty !! Part Source !! Special Settings | ! Qty !! Part Source !! Special Settings | ||
|- | |- | ||
| − | | 1 || [https://github.com/ | + | | 1 || [https://github.com/Poofjunior/jubilee_xyz_probe_tool/blob/main/fabrication_exports/coupling_junction.STL Coupling Junction] || |
|- | |- | ||
| − | | 1 || [https://github.com/ | + | | 1 || [https://github.com/Poofjunior/jubilee_xyz_probe_tool/blob/main/fabrication_exports/printed_base.STL Base] || |
|- | |- | ||
| − | | 1 || [https://github.com/ | + | | 1 || [https://github.com/Poofjunior/jubilee_xyz_probe_tool/blob/main/fabrication_exports/printed_lid.STL Lid] || |
|- | |- | ||
| − | | 1 || [https://github.com/ | + | | 1 || [https://github.com/Poofjunior/jubilee_xyz_probe_tool/blob/main/fabrication_exports/printed_spring_stud.STL Spring Stud] || |
|- | |- | ||
| − | | 1 || [https://github.com/ | + | | 1 || [https://github.com/Poofjunior/jubilee_xyz_probe_tool/blob/main/fabrication_exports/printed_wire_tab.STL Wire Tab] || |
|- | |- | ||
| − | | | + | | 3 || [https://github.com/Poofjunior/jubilee_xyz_probe_tool/blob/main/fabrication_exports/tool_ball_cup.STL Tool Ball Cup] || |
|- | |- | ||
| − | |||
| − | |||
| − | |||
|} | |} | ||
Revision as of 10:46, 28 December 2022
The XYZ Probe Tool is a compact touch probe capable of inspecting objects installed into the machine or acting as supplementary way of homing the machine.
Specs
- kinematic coupling based design
- looks like a mechanical limit switch in software
- uses an off-the-shelf ruby-tipped cnc probe tip
Parts to Buy
TODO
Assembly Tools
TODO
3D Printed Parts and Settings
Print all parts in the default model orientations using the following settings. Note that some special settings exist for particular parts; they are noted in the table.
Common Settings
- PLA
- 0.4mm nozzle
- No supports
- 0.2mm layer height
- 6 perimeters ← this is esp important for parts with heat-set inserts
- 20% infill (any pattern)
Parts and Special Settings
Assembly Fixtures
| Qty | Part Source | Special Settings |
|---|---|---|
| 1 | Clamp Collar Spacer | |
| 1 | Drive Pulley Spacer |
Syringe Tool
| Qty | Part Source | Special Settings |
|---|---|---|
| 1 | Coupling Junction | |
| 1 | Base | |
| 1 | Lid | |
| 1 | Spring Stud | |
| 1 | Wire Tab | |
| 3 | Tool Ball Cup |
Parking Post
| Qty | Part Source | Special Settings |
|---|---|---|
| 1 | Parking Post Base xxH x xxW | |
| 1 | Tool Holder xxH x xxW |
Assembly Instructions
TODO
Software Configuration
TODO