Lab Automation Plate
Revision as of 10:15, 28 September 2021 by Poofjunior (talk | contribs) (Created page with "500px|thumb ==Overview and Specs == This bed plate holds up to six standard well plates in a repeatable position. It can be fabricated entir...")
Overview and Specs
This bed plate holds up to six standard well plates in a repeatable position. It can be fabricated entirely from laser-cut, 3D-printed, and off-the shelf hardware, and it can be assembled with conventional hand tools.
Parts to Buy
Assembly Tools
Assembly Instructions
- [Lab Automation Plate Assembly Instructions]
Software
Since Jubilee uses 3-point bed leveling to home the Z axis, you will need to adjust the three test points in your bed.g config file. The suggested locations are:
TODO
Furthermore, you'll want to home the machine before installing any labware. Otherwise Jubilee's carriage will collide with it during the homing sequence.
Apart from that, no other software changes are needed for this bed plate.