Difference between revisions of "XYZ Probe Tool"

From Jubilee
Jump to navigation Jump to search
Line 41: Line 41:
 
! Qty !! Part Source !! Special Settings
 
! Qty !! Part Source !! Special Settings
 
|-
 
|-
−
| 1 || [https://github.com/machineagency/jubilee_syringe_tool/blob/main/fabrication_exports/symmetric_plunger_actuator.STL Plunger Actuator] ||  
+
| 1 || [https://github.com/Poofjunior/jubilee_xyz_probe_tool/blob/main/fabrication_exports/coupling_junction.STL Coupling Junction] ||  
 
|-
 
|-
−
| 1 || [https://github.com/machineagency/jubilee_syringe_tool/blob/main/fabrication_exports/pulley_block.STL Pulley Block] ||  
+
| 1 || [https://github.com/Poofjunior/jubilee_xyz_probe_tool/blob/main/fabrication_exports/printed_base.STL Base] ||  
 
|-
 
|-
−
| 1 || [https://github.com/machineagency/jubilee_syringe_tool/blob/main/fabrication_exports/belt_retention_base.STL Belt Retention Base] ||  
+
| 1 || [https://github.com/Poofjunior/jubilee_xyz_probe_tool/blob/main/fabrication_exports/printed_lid.STL Lid] ||  
 
|-
 
|-
−
| 1 || [https://github.com/machineagency/jubilee_syringe_tool/blob/main/fabrication_exports/belt_retention_spacer.STL Belt Retention Spacer] ||  
+
| 1 || [https://github.com/Poofjunior/jubilee_xyz_probe_tool/blob/main/fabrication_exports/printed_spring_stud.STL Spring Stud] ||  
 
|-
 
|-
−
| 1 || [https://github.com/machineagency/jubilee_syringe_tool/blob/main/fabrication_exports/wire_management_shroud.STL Wire Management Shroud] ||  
+
| 1 || [https://github.com/Poofjunior/jubilee_xyz_probe_tool/blob/main/fabrication_exports/printed_wire_tab.STL Wire Tab] ||  
 
|-
 
|-
−
| 1 || [https://github.com/machineagency/jubilee_syringe_tool/blob/main/fabrication_exports/left_tool_wing_v2.STL Left Parking Wing V2] ||  
+
| 3 || [https://github.com/Poofjunior/jubilee_xyz_probe_tool/blob/main/fabrication_exports/tool_ball_cup.STL Tool Ball Cup] ||  
 
|-
 
|-
−
| 1 || [https://github.com/machineagency/jubilee_syringe_tool/blob/main/fabrication_exports/right_tool_wing_v2.STL  Right Parking Wing V2] ||
 
−
|-
 
−
| 1 || [https://github.com/machineagency/jubilee_syringe_tool/blob/main/fabrication_exports/syringe_tool_base.STL Syringe Tool Base] || Print with Supports ''from build plate only''.
 
 
|}
 
|}
  

Revision as of 11:46, 28 December 2022

The XYZ Probe Tool is a compact touch probe capable of inspecting objects installed into the machine or acting as supplementary way of homing the machine.

Xyz touch probe overview.png

Specs

  • kinematic coupling based design
  • looks like a mechanical limit switch in software
  • uses an off-the-shelf ruby-tipped cnc probe tip

Parts to Buy

TODO

Assembly Tools

TODO

3D Printed Parts and Settings

Print all parts in the default model orientations using the following settings. Note that some special settings exist for particular parts; they are noted in the table.

Common Settings

  • PLA
  • 0.4mm nozzle
  • No supports
  • 0.2mm layer height
  • 6 perimeters ← this is esp important for parts with heat-set inserts
  • 20% infill (any pattern)

Parts and Special Settings

Assembly Fixtures

Qty Part Source Special Settings
1 Clamp Collar Spacer
1 Drive Pulley Spacer

Syringe Tool

Qty Part Source Special Settings
1 Coupling Junction
1 Base
1 Lid
1 Spring Stud
1 Wire Tab
3 Tool Ball Cup

Parking Post

Qty Part Source Special Settings
1 Parking Post Base xxH x xxW
1 Tool Holder xxH x xxW

Assembly Instructions

TODO

Software Configuration

TODO

Retrieved from "https://jubilee3d.com/index.php?title=XYZ_Probe_Tool&oldid=4577"