Difference between revisions of "XYZ Probe Tool"

From Jubilee
Jump to navigation Jump to search
Line 26: Line 26:
  
 
=== Parts and Special Settings ===
 
=== Parts and Special Settings ===
 +
==== Assembly Fixtures ====
 +
{| class="wikitable sortable"
 +
|-
 +
! Qty !! Part Source !! Special Settings
 +
|-
 +
| 1 || [https://github.com/machineagency/jubilee_syringe_tool/blob/main/fabrication_exports/assembly_fixtures/clamp_collar_spacer.STL Clamp Collar Spacer ] ||
 +
|-
 +
| 1 || [https://github.com/machineagency/jubilee_syringe_tool/blob/main/fabrication_exports/assembly_fixtures/drive_pulley_height_spacer.STL Drive Pulley Spacer] ||
 +
|}
 +
 +
==== Syringe Tool ====
 +
{| class="wikitable sortable"
 +
|-
 +
! Qty !! Part Source !! Special Settings
 +
|-
 +
| 1 || [https://github.com/machineagency/jubilee_syringe_tool/blob/main/fabrication_exports/symmetric_plunger_actuator.STL Plunger Actuator] ||
 +
|-
 +
| 1 || [https://github.com/machineagency/jubilee_syringe_tool/blob/main/fabrication_exports/pulley_block.STL Pulley Block] ||
 +
|-
 +
| 1 || [https://github.com/machineagency/jubilee_syringe_tool/blob/main/fabrication_exports/belt_retention_base.STL Belt Retention Base] ||
 +
|-
 +
| 1 || [https://github.com/machineagency/jubilee_syringe_tool/blob/main/fabrication_exports/belt_retention_spacer.STL Belt Retention Spacer] ||
 +
|-
 +
| 1 || [https://github.com/machineagency/jubilee_syringe_tool/blob/main/fabrication_exports/wire_management_shroud.STL Wire Management Shroud] ||
 +
|-
 +
| 1 || [https://github.com/machineagency/jubilee_syringe_tool/blob/main/fabrication_exports/left_tool_wing_v2.STL Left Parking Wing V2] ||
 +
|-
 +
| 1 || [https://github.com/machineagency/jubilee_syringe_tool/blob/main/fabrication_exports/right_tool_wing_v2.STL  Right Parking Wing V2] ||
 +
|-
 +
| 1 || [https://github.com/machineagency/jubilee_syringe_tool/blob/main/fabrication_exports/syringe_tool_base.STL Syringe Tool Base] || Print with Supports ''from build plate only''.
 +
|}
 +
 +
==== Parking Post ====
 +
{| class="wikitable sortable"
 +
|-
 +
! Qty !! Part Source !! Special Settings
 +
|-
 +
| 1 || Parking Post Base xxH x xxW ||
 +
|-
 +
| 1 || Tool Holder xxH x xxW ||
 +
|-
 +
|}
  
 
==Assembly Instructions==
 
==Assembly Instructions==

Revision as of 11:43, 28 December 2022

The XYZ Probe Tool is a compact touch probe capable of inspecting objects installed into the machine or acting as supplementary way of homing the machine.

Xyz touch probe overview.png

Specs

  • kinematic coupling based design
  • looks like a mechanical limit switch in software
  • uses an off-the-shelf ruby-tipped cnc probe tip

Parts to Buy

TODO

Assembly Tools

TODO

3D Printed Parts and Settings

Print all parts in the default model orientations using the following settings. Note that some special settings exist for particular parts; they are noted in the table.

Common Settings

  • PLA
  • 0.4mm nozzle
  • No supports
  • 0.2mm layer height
  • 6 perimeters ← this is esp important for parts with heat-set inserts
  • 20% infill (any pattern)

Parts and Special Settings

Assembly Fixtures

Qty Part Source Special Settings
1 Clamp Collar Spacer
1 Drive Pulley Spacer

Syringe Tool

Qty Part Source Special Settings
1 Plunger Actuator
1 Pulley Block
1 Belt Retention Base
1 Belt Retention Spacer
1 Wire Management Shroud
1 Left Parking Wing V2
1 Right Parking Wing V2
1 Syringe Tool Base Print with Supports from build plate only.

Parking Post

Qty Part Source Special Settings
1 Parking Post Base xxH x xxW
1 Tool Holder xxH x xxW

Assembly Instructions

TODO

Software Configuration

TODO

Retrieved from "https://jubilee3d.com/index.php?title=XYZ_Probe_Tool&oldid=4576"